Cornetto, Shelf speaker   as in K+T 3/2014

Technical data
- impedance: 8 Ohm
- sensivity (2,83V/1m): 82 dB
- size (HxWxD): 302 x 124 x 241 mm
- frequency range (-8dB): 60 - 19000 Hz
- crossover frequency(s): Hz
- speaker type: HR

Cornetto is a horn shelf speaker with Tang Band fullrange loudspeaker. Cornetto is developed by Thomas Schmidt.
 

Our kit consists of

  
  • Tang Band fullrange W3-1878
  • 0,25x Damping Sonofil 100 x 35 cm for 20 litres
  • 0,25x Foam N25, 100x50x4 cm, black
  • Binding Post PK31, gold plated (one pair, red and black)
  • 1m Speaker cable 2x1.5 mm2, transparent
  • Pan screws 4x20 black, cross recess, 4 pieces
  • Plan for DIY kit

the crossover components,
to be mounted on a small wooden board.

  • Audaphon MKP CAP Superior 8.2 μF / 400 Vdc
  • 1.0 mm air core coil, 0.82 mH/0.44 Ohm
  • Metal-oxide resistor, 10W 8.2 Ohm (grey-red-gold)

Kit without cabinet, price per speaker - not available

Kit with high-end crossover

Our Kit with high end crossover provides high-quality ClarityCap film capacitors and Mundorf electrolytic capacitors. Mundorf baked varnish coils are used as a coil.

  • ClarityCap ESA capacitor 8.2 μF / 250 Vdc
  • Mundorf baked varnish air core coil BL100, 0.82 mH/0.45 Ohm
  • Metal-oxide resistor, 10W 8.2 Ohm (grey-red-gold)

Kit without cabinet, price per speaker - not available

Impedance correction

  If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).

  • electrolytic capacitor, unetched, 22uF / 70 Vdc
  • 0.7 mm air core coil, 0.33 mH/0.48 Ohm
  • Metal-oxide resistor, 10W 15 Ohm (brown-green-black)


Price per impedance correction for one speaker, to be mounted on a small wooden board.   EUR 12,60 excl. VAT: € 10.59 / $ 11.44

universal PCB

If you prefer to mount the crossover components on a 140 x 102 mm universal PCB instead on wood:
Universal PCB RA140, order no.. str-RA140, price per unit: EUR 4,20 excl. VAT: € 3.53 / $ 3.81
We recommend one board per kit (two boards for a speaker pair)
 


Home   Klang+Ton Overview