Technical Data:
- impedance: 8 Ohm
- sensivity (2,83V/1m): 81 dB
- size (HxWxD): 180 x 180 x 180 mm
- frequency range (-8dB): 52 - 17000 Hz
- crossover frequency(s): - Hz
- speaker type: bass reflex
CT249 is a Mivoc speaker with a full range driver Mivoc XAW 110 HC supported by a tweeter.
The tweeter is looking to the ceiling to improve the surround sound.
|
Our kit consists of
- Mivoc neodymium silk dome HGH 258 FN II
- Mivoc XAW 110 HC II woofer new:with black cone
- Bass reflex tube HP35, 35x123mm, black
- Polyester damping material, 125 g for 20L volume
- Terminal Mivoc AT 105 S (2 connectors)
- 1,5 m Speaker cable 2x2.5 mm2, transparent
- Pan screws 3.5x17 black, 12 pieces
- Plan for DIY kit
- Postage
the crossover components (right),
to be mounted on a small wooden board.
|
- MKP capacitor 1.8 μF / 400V
- MKP capacitor 3.3 μF / 400V
- MKP capacitor 12 μF / 400V
- MKP capacitor 18 μF / 400V
- air core coil 0.7 mm, 0.18 mH/0.36 Ohm
- air core coil 1 mm, 0.56 mH/0.36 Ohm
- air core coil 1 mm, 0.82 mH/0.45 Ohm
- MOX10 resistor 4.7 Ohm/10Watt (yellow-purple-gold)
- 2 pcs MOX10 resistor 5.6 Ohm/10Watt (green-blue-gold)
- 2 pcs MOX10 resistor 8.2 Ohm/10Watt (grey-red-gold)
- MOX10 resistor 56 Ohm/10 Watt (green-blue-black)
|
Kit without cabinet, price per speaker
- not available
If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. str-RA160, price per unit:
EUR 5,90 excl. VAT: € 4.96 / $ 5.35
We recommend one board per kit (two boards per speaker pair)
Kit with high-end crossover
Our high-end version comprises low-distortion baked varnish coils. In the signal path to the tweeter we employ one Jantzen Z-Superior MKP capacitor.
- Jantzen Cross Cap MKP capacitor 1.8 μF / 400V
- Jantzen Cross Cap MKP capacitor 12 μF / 400V
- Jantzen Cross Cap MKP capacitor 18 μF / 400V
- Jantzen Z-Superior MKP capacitor 3.3 μF / 800 VDC
- Mundorf baked varnish air core coil BL71, 0.18 mH/0.34 Ohm
- Mundorf baked varnish air core coil BL100, 0.56 mH/0.36 Ohm
- Mundorf baked varnish air core coil BL100, 0.82 mH/0.45 Ohm
- MOX10 resistor 4.7 Ohm/10Watt (yellow-purple-gold)
- 2 pcs MOX10 resistor 5.6 Ohm/10Watt (green-blue-gold)
- 2 pcs MOX10 resistor 8.2 Ohm/10Watt (grey-red-gold)
- MOX10 resistor 56 Ohm/10 Watt (green-blue-black)
Kit with high-end- crossover without cabinet, price per speaker
- not available
If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. str-RA160, price per unit:
EUR 5,90 excl. VAT: € 4.96 / $ 5.35
We recommend one board per kit (two boards per speaker pair)
|