Mivoice 2       as in Klang+Ton 4/2005

Mivoice 2 aus Klang+Ton 4/2005
Technical data:
- impedance: 4 Ohm
- nominal sound pressure level (2.83V/1m): 88 dB
- frequency range (-8dB): 39-25 000 Hz
- crossover frequency: ? Hz
- size (HxWxD): 104 x 24 x 34 cm
- 2 way bass reflex speaker
Mivoice 2 is a 2 way floorstanding speaker with Mivoc drivers in d'Appolito arrangement.

Two Mivoc XAW 180 HC midrange / bass drivers are being used, and a XGH 258 alu as tweeter.

Mivoice 1 is a smaller version with just one bass driver.

Review in K+T 4/2005:
"Sound reproduction by the Mivoice 2 amazes with bass that surpasses the performance of the already excellent Mivoice 1. Additionally, the high frequencies are reproduced with unchecked energy and dynamics, since high resistors were omitted. The sound is lively and natural. Particularly pleasing is the homogeneous teamwork of all components forming a uniform and integrated whole. Just the same with the imaging of the loudspeaker. The virtual stage is realistically wide with clearly outlined acoustic details, like small splashes of colour on a painting. The Mivoice 2 is in all aspects just a notch better than the 1."
 

Our kit contains:

  • 1 x Mivoc XGH 258 Alu tweeter
  • 2 x Mivoc XAW 180 HC bass driver
  • 1 x terminal with gold plated brass binding posts
  • 1.5 x damping material
  • 0.5 x sealing tape
  • 12 x PAN screws for the drivers
  • 3 m cable 2 x 1.5 mm2 for internal wiring
  • description and building instruction
  • the crossover components to be mounted on wood
  • 1.2 mH air core coil with 1.4 mm wire
  • 0.68 mH air core coil, 0.7 mm wire
  • 22 uF MKT capacitor
  • 4.7 uF MKP capacitor/400V
  • 1.5 Ohm MOX10 resistor (brown-green-gold)
  • 15 Ohm MOX10 resistor (brown-green-black)
    		•

    Order No. str-mivoice-2, price per unit (without cabinet)   EUR 164,00

    Home   K+T Overview