Bonbon, Shelf speaker   as in K+T 6/2012

Technical data
- impedance: 4 Ohm
- sensivity (2,83V/1m): 85 dB
- size (HxWxD): 200 x 130 x 234 mm
- frequency range (-8dB): 60 - 40000 Hz
- crossover frequency(s): 6000 Hz
- speaker type: bass reflex

Thomas Schmidt and Holger Barske entered a competition to find out who would build the best mini monitor. The result was published in Klang+Ton 6/2007 (Mini HB, TS and CG; none of them is available anymore).

Now Thomas Schmidt and Holger Barske decided to use the Scan-Speak Tweeter D2004/602000 and the mids 12M/4631 in a new project.
 

The crossover is very simple. Only 3 components (a capacitor and two coils) are used to an 18 dB/octave type.
 

    

Our kit consists of

  • ScanSpeak mids/woofer 12M/4631G
  • ScanSpeak Illuminator D2004/6020-00
  • Bass reflex tube HP35, 35x125 mm, black
  • PE sealing tape, 5x2 mm
  • 0,25x Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK31, gold plated (per pair, red and black)
  • Speaker cable 2x1.5 mm2, transparent
  • Pan screws 4x20 black, 8 pieces
  • Plan for DIY kit
the crossover components (below),
to be mounted on a small wooden board.
  • ClarityCap ESA capacitor 2.2 μF / 630 Vdc
  • Mundorf air core coil L140, 0.33 mH/0.15 Ohm
  • Mundorf air core coil L140, 0.47 mH/0.19 Ohm

Important note: The port Streamline 30 is no longer available; therefore we deliver the post HP 35. The the cabinet cut-out diameter should be 49 mm instead of 34 mm.

Kit without cabinet, price per speaker EUR 482,00 excl. VAT: € 405.04 / $ 433.39 If you prefer to mount the crossover components on a 140 x 102 mm universal PCB instead on wood:
Universal PCB RA140, order no.. str-RA140, price per unit: EUR 4,20 excl. VAT: € 3.53 / $ 3.78
We recommend one boards per kit (two boards for a speaker pair)

Kit with high-end crossover

f you wish to employ a top crossover then our high end version is the right choice. All coils are Mundorf copper foil coils; the capacitor is a ClarityCap MR type of high quality:

  • ClarityCap MR capacitor 2.2 μF / 630 Vdc
  • Mundorf copper foil coil CFC14-0.33mH/0.13Ohm
  • Mundorf copper foil coil CFC14-0.47mH/0.15Ohm

Kit with high-end-crossover without cabinet, price per speaker EUR 599,00 excl. VAT: € 503.36 / $ 538.60

If you prefer to mount the crossover components on a 240 x 165 mm universal PCB instead on wood:
Universal PCB RA240, order no.. str-RA240, price per unit: EUR 8,60 excl. VAT: € 7.23 / $ 7.73
We recommend one board per kit (two boards for a speaker pair)

Impedance correction

 If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).

  • Audaphon MKP CAP Superior 12 μF / 400 Vdc
  • Audaphon air core coil L7, 0.12 mH/0.29 Ohm
  • Metal-oxide resistor, 10W 4.7 Ohm (yellow-violet-gold)


Price per impedance correction for one speaker, to be mounted on a small wooden board.   EUR 12,90 excl. VAT: € 10.84 / $ 11.60
 


Home   Klang+Ton Overview