Cherlen 12/18 dB   Floorstanding as in K+T 5/2015

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 86 dB
  • size (HxWxD): 960 x 180 x 240 mm
  • frequency range (-8dB): 35 - 30000 Hz
  • crossover frequency(s): 2400 Hz
  • speaker type: bass reflex
Enlarge

The Cherlen 12/18 dB is a high-end 2 way bassreflex floorstanding speaker with Air Motion Transformer and 6 dB filter. The kit is delivered with the outstanding Audaphon AMT 1i and the excellent Morel TSCM 634. Cherlen has been developed by Dennis Frank and Daniel Gattig.

The filter is with second and third order filter. If you prefer a separation with first order filter we recommend Cherlen with 6 dB crossover..

The crossover consists of a 3rd order high-pass filter (18 dB per octave slope) for the tweeter. A parallel RCL drain circuit is smoothing the frequency response of the tweeter at about 6 kHz. The woofer is connected to a 2nd order low-pass filter. A parallel RCL drain circuit is smoothing the frequency response of the woofer at about 800 Hz

The frequency response of this speaker is very linear. The decay spectrum is nearly perfect. At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are lower than 0,2% above 600 Hz and rises not above 0,6% at 95 dB at 1 m .

Our kit consists of

  • Audaphon AMT-1i
  • Morel TSCM 634, one unit
  • 2x Bass reflex tube HP70, 68x160 mm, black
  • Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
  • 0,5x PE sealing tape, 5x2 mm, 7.5 m
  • Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK31, gold plated (one pair, red and black)
  • 3m Speaker cable 2x1.5 mm2, transparent
  • Pan screws 4x20 black, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.
  • Audaphon MKP CAP Superior 1.5 μF / 400 Vdc
  • Audaphon MKP CAP Superior 6.8 μF / 400 Vdc
  • Audaphon MKP CAP Superior 8.2 μF / 400 Vdc
  • Audaphon MKP CAP Superior 12 μF / 400 Vdc
  • Audaphon MKP CAP Superior 15 μF / 400 Vdc
  • 2x Mundorf baked varnish air core coil BL71, 0.22 mH/0.34 Ohm
  • Mundorf baked varnish air core coil BL140, 0.68 mH/0.23 Ohm
  • Mundorf ferrite core coil F50 5.6mH/2.41Ohm
  • Metal-oxide resistor, 10W 2.7 Ohm (red-purple-gold)
  • Metal-oxide resistor, 10W 4.7 Ohm (yellow-violet-gold)
  • Metal-oxide resistor, 10W 3.9 Ohm (orange-white-gold)
  • Metal-oxide resistor, 10W 22 Ohm (red-red-black)

Kit without cabinet, price per speaker   EUR 1328,00 excl. VAT: € 1115.97 / $ 1194.08

Kit with high-end crossover

The high-end kit comes with ClarityCap capacitors of type ESA and Audaphon MKP CAP Superior. The inductances are baked varnished coils and a Mundorf copper foil coil for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered.

Kit with high-end-crossover without cabinet, price per speaker   EUR 1389,00 excl. VAT: € 1167.23 / $ 1248.93

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 12,90 excl. VAT: € 10.84 / $ 11.60

universal PCBs

If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 150x115 mm, tin plated, price per unit:   EUR 4,70 excl. VAT: € 3.95 / $ 4.23
We recommend two boards per kit (4 boards per speaker pair)

Measurements Cherlen 12/18 dB

Grafik

Pictures Cherlen 12/18 dB

Grafik


Home   Klang+Ton Overview