Pico Lino 3   Shelf speaker as in Hobby HiFi 5/2015

Technical data
  • impedance: 8 Ohm
  • sensivity (2,83V/1m): 84 dB
  • size (HxWxD): 350 x 160 x 350 mm
  • frequency range (-8dB): 50 - 23000 Hz
  • crossover frequency(s): Hz
  • speaker type: transmission line

Pico Lino 3 is a small transmission line bookshelf loudspeaker that employs a Scan Speak fullrange loudspeaker 10F-8414G10. Pico Lino 3 has been developed by Bernd Timmermanns.

The crossover consists of a LRC notch filter wired in series. The wave trap reduces the level between 2 and 4 kHz.

Between 60 Hz and 14 kHz, the frequency response of this loudspeaker is suitably flat at a 20 degrees sideways angle. For a wide band driver, the decay spectrum is excellent. At low volume, i.e. 80 dB at 1 m, nonlinear distortion is extremely small.

Our kit consists of

  • ScanSpeak Fullrange 10F-8414G10
  • 0,5x PE sealing tape, 5x2 mm, 7.5 m
  • 0,5x Damping Sonofil 100 x 35 cm for 20 litres
  • 0,5x Audaphon Damping 10, 970 x 470 mm, adhesive
  • Binding Post PK31, gold plated (one pair, red and black)
  • 0,5m Speaker cable 2x1.5 mm2, transparent
  • 0,5x Pan screws 3.5x17 black, cross recess, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.
  • Audaphon MKP CAP Superior 10 μF / 400 Vdc
  • Mundorf baked varnish air core coil BL100, 0.68 mH/0.39 Ohm
  • Metal-oxide resistor, 5W 4.7 Ohm (yellow-violet-gold)

Kit without cabinet, price per speaker   EUR 126,00 excl. VAT: € 105.88 / $ 113.29

Kit with high-end crossover

Kit with high-end-crossover without cabinet, price per speaker   EUR 166,00 excl. VAT: € 139.50 / $ 149.26

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 5,50 excl. VAT: € 4.62 / $ 4.95

universal PCBs

If you prefer to mount the crossover components on a 140 x 102 mm universal PCB instead on wood:
Universal PCB RA140, order no.. str-RA140, price per unit:   EUR 4,20 excl. VAT: € 3.53 / $ 3.78
We recommend a half or one board per kit (1 to 2 boards for a speaker pair)


Home   Hobby HiFi Overview