High End PA AMT   Shelf speaker as in K+T 5/2018

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 98 dB
  • size (HxWxD): 950 x 300 x 370 mm
  • frequency range (-8dB): 38 - 20000 Hz
  • crossover frequency(s): 1300 Hz
  • speaker type: bass reflex
Enlarge

High End PA AMT is a two way compact speaker.

High End PA AMT is a bass-reflex cabinet loudspeaker with drivers of Mundorf and Wavecor.

The kit is delivered with the following drivers:
- a Mundorf ProAMT 197PP27R-7-452-H air motion transformer
- two Wavecor WF259PA01 woofers

The loudspeaker has been developed by Dennis Frank and Daniel Gattig.

The crossover consists of:
- a 3rd order high-pass filter (18 dB per octave slope) for the tweeter.
- a 2nd order low-pass filter (12 dB per octave slope) for the woofer.

The frequency response of this speaker is perfectly linear.

The decay spectrum is perfect.

At low volume, i.e. 95 dB at 1 m, the nonlinear distortions are below 0,6% above 200 Hz and doesn't exceed 0,7% at 105 dB at 1 m between 200 Hz and 10000 Hz. That is quite splendid.

Our kit consists of

  • ProAMT 197PP27R-7-452-H
  • 2x Wavecor WF259PA01, 8 Ohm, professional woofer
  • 4x Bass reflex tube HP70 XL, 70x220 mm, black
  • 5x Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
  • 1,5x Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK28 I, gold plated (one pair, red and black)
  • 3m Speaker cable 2x1.5 mm2, transparent
  • 2,5x Allen wood screws, black, 5x30 mm, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • Audaphon MKP CAP Superior 4.7 μF / 400 Vdc
  • Audaphon MKP CAP Superior 10 μF / 400 Vdc
  • Audaphon MKP CAP Superior 15 μF / 400 Vdc
  • Audaphon MKT CAP 33 μF / 160 Vdc
  • Mundorf air core coil L140, 0.47 mH/0.19 Ohm
  • Mundorf air core coil L140, 0.56 mH/0.20 Ohm
  • Mundorf bs140 core coil 1.5 mH/0.12Ohm
  • 4x Metal-oxide resistor, 10W 33 Ohm (orange-orange-black)

Kit without cabinet, price per speaker   EUR 2046,00 excl. VAT: € 1719.33 / $ 1839.68

Kit with high-end crossover

The high-end kit is delivered with foil and baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the tweeter are of type polypropylen (MKP) Clarity-Cap CSA 630 V.

Kit with high-end-crossover without cabinet, price per speaker   EUR 2229,00 excl. VAT: € 1873.11 / $ 2004.23

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 23,20 excl. VAT: € 19.50 / $ 20.86

universal PCB

If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 220x155 mm, order no. I-8805002, price per unit:   EUR 11,80 excl. VAT: € 9.92 / $ 10.61
We recommend one board per kit (2 boards per speaker pair)


Home   Klang+Ton Overview