Competition TL   Floorstanding as in K+T 2/2015

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 91 dB
  • size (HxWxD): 1100 x 220 x 337 mm
  • frequency range (-8dB): 40 - 40000 Hz
  • crossover frequency(s): 2200 Hz
  • speaker type: transmission line

BPA Competition TML is a floorstander developed by Karl Heinz Fink and Thorsten Fischer.

Our kit consists of

  • Omnes Audio RT 2.0
  • 2x Tang Band W6-623C paper mids/woofer
  • PE sealing tape, 5x2 mm
  • 2x Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK31, gold plated [one pair, red and black]
  • 3m Speaker cable 2x1.5 mm2, transparent
  • Pan screws 4x20 black, cross recess, 12 pieces
  • Plan for DIY kit

 the crossover components (below),
to be mounted on a small wooden board.

  • 4x Audaphon MKP CAP Superior
  • 1x 0.7 mm air core coil
  • 1x 1.32 mm air core coil
  • 4x Metal-oxide resistor, 10W


Kit without cabinet,
price per speaker   - not available

Kit with high-end crossover

The high-end kit comes with high-value ClarityCap MKP foil capacitors, type ESA in series to the tweeter. The inductances are baked varnished coils for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered.


Kit without cabinet,
price per speaker   - not available

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 14,60 excl. VAT: € 12.27 / $ 13.01

universal PCBs

If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 220x155 mm, order no. I-8805002, price per unit:   EUR 11,80 excl. VAT: € 9.92 / $ 10.51
We recommend one board per kit (two boards for a speaker pair)


Home   Klang+Ton Overview