CT 263   Shelf speaker as in K+T 6/2012

An excerpt from the Klang+Ton review

Our kit consists of

Information: Instead of the tube DN75, we deliver a bass reflex tube HP70.

Kit without cabinet, price per speaker   EUR 154,00 excl. VAT: € 129.41 / $ 150.12

If you prefer to mount the crossover components on a 240 x 165 mm universal PCB instead on wood:
Universal PCB RA240, order no.. str-RA240, price per unit:   EUR 8,60 excl. VAT: € 7.23 / $ 8.38
We recommend one board per kit (two boards for a speaker pair)

Kit with high-end crossover

• Audaphon MKT CAP 5.6 μF / 160 Vdc
• Audaphon MKT CAP 8.2 μF / 160 Vdc
• Audaphon MKT CAP 22 μF / 160 Vdc
• Audaphon MKP CAP Superior 4.7 μF / 400 Vdc
• Mundorf baked varnish air core coil BL71, 0.56 mH/0.64 Ohm
• Mundorf baked varnish air core coil BL71, 1.0 mH/1.02 Ohm
• Mundorf baked varnish air core coil BL100, 1.5 mH/0.62 Ohm
• Metal-oxide resistor, 10W 2.7 Ohm (red-purple-gold)
• Metal-oxide resistor, 10W 12 Ohm (brown-red-black)
• Metal-oxide resistor, 10W 15 Ohm (brown-green-black)

Kit with high-end-crossover without cabinet, price per speaker   EUR 171,00 excl. VAT: € 143.70 / $ 166.69

If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. str-RA160, price per unit:   EUR 5,92 excl. VAT: € 4.97 / $ 5.77
We recommend one board per kit (two boards for a speaker pair)

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).

• electrolytic capacitor, unetched, 15uF / 70 Vdc
• 0.7 mm air core coil L7, 0.39 mH/0.49 Ohm
• Metal-oxide resistor, 10W 8.2 Ohm (grey-red-gold)

EUR 14,80 excl. VAT: € 12.44 / $ 14.43

Home   Klang+Ton Overview