CT 325 is a compact loudspeaker with a full range driver.
CT 325 is a bass-reflex cabinet loudspeaker with drivers of Redcatt .
The kit is delivered with a Redcatt 4FRX4 full range driver
The loudspeaker has been developed by Thomas Schmidt.
The crossover consists of: - two blocking circuits in series with the full range driver.
The frequency response of this speaker is mostly linear.
The decay spectrum is nearly perfect.
At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 0,8% above 300 Hz and doesn't exceed 1,5% at 95 dB at 1 m between 300 and 15000 Hz.
the crossover components (right), to be mounted on a small wooden board.
Kit without cabinet, price per speaker EUR 49,00 excl. VAT: € 41.18 / $ 44.47
The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the Redcatt 4FRX4 are of type polypropylen (MKP) Audaphon MKP CAP Superior 400 V.
Kit with high-end-crossover without cabinet, price per speaker EUR 62,00 excl. VAT: € 52.10 / $ 56.27
If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).
Price per impedance correction for one speaker, to be mounted on a small wooden board. - not available (_)
If you prefer to mount the crossover components on a 140 x 102 mm universal PCB instead on wood: Universal PCB RA140, order no.. str-RA140, price per unit: EUR 4,20 excl. VAT: € 3.53 / $ 3.81 We recommend one board per kit (two boards for a speaker pair)
Home Klang+Ton Overview