- Visaton SL87 FE, 8 Ohm
- Bass reflex tube HP35, 35x125 mm, black
- 0,25x Damping Sonofil 100 x 35 cm for 20 litres
- High end female banana jacks, red and black
- 1m Speaker cable 2x0.75 mm2, transparent
- Pan screws 4x20 black, cross recess, 4 pieces
- Plan for DIY kit
the crossover components (right),
to be mounted on a piece of wood
|
- electrolytic capacitor, unetched, 1.5 μF / 70 Vdc
- electrolytic capacitor, unetched, 5.6 μF / 70 Vdc
- electrolytic capacitor, unetched, 6.8 μF / 70 Vdc
- 0.5 mm air core coil, 4.7 mH/3.777 0hm
- 1.0 mm air core coil, 0.12 mH/0.15 Ohm
- 1.0 mm air core coil, 0.47 mH/0.32 Ohm
- Metal-oxide resistor, 5W 3.3 Ohm [orange-orange-gold]
- Metal-oxide resistor, 5W 10 Ohm [brown-black-black]
- Metal-oxide resistor, 5W 15 Ohm [brown-green-black]
|
Kit without cabinet, price per speaker
EUR 70,00 excl. VAT: € 58.82 / $ 60.59
Kit with high-end crossover
The kit with high-end crossover contains Audaphon foil capacitors with polypropylen foil. In series to the loudspeaker Mundorf baked varnish coils are used.
- Audaphon MKP CAP Superior 1.5 μF / 400 Vdc
- Audaphon MKP CAP Superior 5.6 μF / 400 Vdc
- Audaphon MKP CAP Superior 6.8 μF / 400 Vdc
- Mundorf air core coil L50, 4.7 mH/3.777 0hm
- Mundorf baked varnish air core coil BL100, 0.12 mH/0.15 Ohm
- Mundorf H core baked varnish coil BH71, 0,47 mH/0.20 0hm
- Metal-oxide resistor, 5W 3.3 Ohm [orange-orange-gold]
- Metal-oxide resistor, 5W 10 Ohm [brown-black-black]
- Metal-oxide resistor, 5W 15 Ohm [brown-green-black]
|
Kit with high-end-crossover without cabinet, price per speaker
EUR 80,40 excl. VAT: € 67.56 / $ 69.59
price-performance kit
The following kit contains only one wave trap curcuit in the crossover. In addition it contais an inexpensive spring loaded terminal.
- Visaton SL87 FE, 8 Ohm
- Bass reflex tube HP35, 35x125 mm, black
- 0,25x Damping Sonofil 100 x 35 cm for 20 litres
- Spring loaded terminal T56 D
- Speaker cable 2x0.75 mm2, transparent
- 0,5x Pan screws 4x20 black, cross recess, 8 pieces
- Plan for DIY kit
the crossover components (right),
to be mounted on a piece of wood
|
- electrolytic capacitor, unetched, 6.8 μF / 70 Vdc
- 1.0 mm air core coil, 0.47 mH/0.32 Ohm
- Metal-oxide resistor, 5W 10 Ohm [brown-black-black]
|
Kit with high-end-crossover without cabinet, price per speaker
EUR 36,60 excl. VAT: € 30.76 / $ 31.68
Impedance correction
|
If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).
- electrolytic capacitor, unetched, 15uF / 70 Vdc
- Metal-oxide resistor, 10W 12 Ohm [brown-red-black]
Price per impedance correction for one speaker, to be mounted on a small wooden board.
EUR 5,50 excl. VAT: € 4.62 / $ 4.76
universal PCB
If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. str-RA160, price per unit:
EUR 5,90 excl. VAT: € 4.96 / $ 5.11
We recommend one board per kit (two boards for a speaker pair)
|