!

FlatPack 4/7 wall-mounted speaker as in Hobby Hifi 5/2019

Technical data

impedance: aktiv Ohm
sensivity (2,83V/1m): aktiv dB
size (HxWxD): 280 x 280 x 400 mm
frequency range (-8dB): 30 - 25000 Hz
crossover frequency(s): 130 Hz
speaker type: bass reflex

FlatPack 4/7 is a two way floorstanding speaker.

FlatPack 4/7 is a bass-reflex cabinet loudspeaker with drivers of Wavecor and Visaton.

The kit is delivered with the following drivers:
- a Visaton B 100 full range driver
- a Wavecor SW168WA01 subwoofer

The loudspeaker has been developed by Bernd Timmermanns.

The crossover consists of:
- a 3rd order high-pass filter (18 dB per octave slope) for the full range driver.
…

The frequency response of this speaker is nearly linear.

The decay spectrum is nearly perfect.

At 90 dB and 1 m, nonlinear distortions are below 1 % almost everywhere above 150 Hz.

Our kit consists of

Visaton full range driver B 100 - 6 Ohm
Wavecor Subwoofer SW168WA01, 4 Ohm
Audaphon AMP-2200, 2 x 200 Watt, DSP, silver
PE sealing tape, 5x2 mm, 7.5 m
Damping Sonofil 100 x 35 cm for 20 litres
0,5x Audaphon Damping 10, 970 x 470 mm, adhesive
Binding Post PK31, gold plated (one pair, red and black)
1m Speaker cable 2x1.5 mm2, transparent
2x Pan screws 3.5x17 black, torx, 8 pieces
0,5x Pan screws 4x20 black, torx, 8 pieces
Plan for DIY kit

Kit without cabinet, price per speaker EUR 666,00 excl. VAT: € 559.66 / $ 587.65

Our kit with AMP-2200 consists of

Visaton full range driver B 100 - 6 Ohm
Wavecor Subwoofer SW168WA01, 4 Ohm
Audaphon AMP-2200, 2 x 200 Watt, DSP, silver
PE sealing tape, 5x2 mm, 7.5 m
Damping Sonofil 100 x 35 cm for 20 litres
0,5x Audaphon Damping 10, 970 x 470 mm, adhesive
Binding Post PK31, gold plated (one pair, red and black)
1m Speaker cable 2x1.5 mm2, transparent
2x Pan screws 3.5x17 black, torx, 8 pieces
0,5x Pan screws 4x20 black, torx, 8 pieces
Plan for DIY kit

Kit without cabinet, price per speaker EUR 666,00 excl. VAT: € 559.66 / $ 587.65

Our kit with AMP-4250 (Stereo)consists of

2x Visaton full range driver B 100 - 6 Ohm
2x Wavecor Subwoofer SW168WA01, 4 Ohm
Audaphon AMP-4250, 4 x 250 Watt, DSP, silver, usb cable
2x PE sealing tape, 5x2 mm, 7.5 m
2x Damping Sonofil 100 x 35 cm for 20 litres
Audaphon Damping 10, 970 x 470 mm, adhesive
2x Binding Post PK31, gold plated (one pair, red and black)
2m Speaker cable 2x1.5 mm2, transparent
4x Pan screws 3.5x17 black, torx, 8 pieces
Pan screws 4x20 black, torx, 8 pieces
2x Plan for DIY kit

Kit without cabinet, price per speaker - not available

Our kit with AMP-2200 (Stereo) consists of

2x Visaton full range driver B 100 - 6 Ohm
2x Wavecor Subwoofer SW168WA01, 4 Ohm
Dynavox hi-fi amplifier silver CS-PA1
Audaphon AMP-2200, 2 x 200 Watt, DSP, silver
2x PE sealing tape, 5x2 mm, 7.5 m
2x Damping Sonofil 100 x 35 cm for 20 litres
Audaphon Damping 10, 970 x 470 mm, adhesive
2x Binding Post PK31, gold plated (one pair, red and black)
2m Speaker cable 2x1.5 mm2, transparent
4x Pan screws 3.5x17 black, torx, 8 pieces
Pan screws 4x20 black, torx, 8 pieces
2x Plan for DIY kit

Kit without cabinet, price per speaker - not available

Home Hobby HiFi Overview