Amplifier modules by: Anaview Audaphon Hypex Hypex Fusion Mivoc Monacor Visaton

Hypex Fusion plate amplifiers
Enlarge Hypex develops and produces amplifiers, digital signal processor solutions and power supplies.
 

Hypex FusionAmp 1 channel

FusionAmp FA251
enlarge

The Hypex FusionAmp FA251 is an amplifier with a Digital Signal Processor.

The Hypex FusionAmp FA251 is programmable via USB 2.0 using a PC. The Hypex Filter Designer (HFD) is a program for setting the Hypex Electronics B.V. DSP amplifiers (all Hypex FusionAmps).

The two inputs can be connected to the left and right output of the preamplifier or to the LFE ("Low Frequency Effects" Dolby or "Low Frequency Enhancement" DTS) output from a receiver. The built-in amplifier of the Hypex FusionAmp FA251 can be connected to the drivers or to a complete loudspeaker / subwoofer.

technical data:

  • analog inputs: 2 x Cinch asymmetric (stereo / 1 x right + 1 x left) (54 kOhm)
  • analog inputs: 1 x XLR balanced (44 kOhm DM / 2,2 MOhm CM)
  • analog inputs: 2 x High Level
  • power consumption Powersafe: less than 0.5 W
  • parameter memory: 3 units (preset 1 - 3)
  • built-in power amplifiers: 1 x 250 Watt (4 Ohm)
  • dimensions (height x width x depth): 280 mm x 120 mm x 55 mm
  • weight: approx 725 g
  • Power supply: 100-120 V / 200-240 V 47-63 Hz
  • SNR AD/DA: -109dB
  • SNR DA: -111dB
  • THD (D+N) (@ -1dBFS) AD/DA: -100dB
  • THD (D+N) (@ -1dBFS) DA: -102.5dB
  • DSP: ADAU1450
  • ADC: AK5554
  • DAC: AK4454
  • SRC: SRC4382

other properties (choices):

price per unit   (Item no. hy-fa251) EUR 275,00 excl. VAT: € 231.09 / $ 256.51

USB cable (not included in delivery of Hypex FusionAmp)

  • with plug USB-Mini-B (5 Pin) to plug USB-A
  • for connecting the Hypex FusionAmp with USB mini B socket
  • black cable with shielding for trouble-free operation
  • Lengths: 1,8 m

price per unit   (Item no. mo-063400) EUR 1,39 excl. VAT: € 1.17 / $ 1.30

cable (please tell the country where you use it)

  • 3 x 1 mm2
  • Lengths: 1,5 m
  • black

price per unit   (Item no. st-BN207314) EUR 2,90 excl. VAT: € 2.44 / $ 2.71
 

FusionAmp FA501
enlarge The Hypex FusionAmp FA501 is an amplifier with a Digital Signal Processor.

The Hypex FusionAmp FA501 is programmable via USB 2.0 using a PC. The Hypex Filter Designer (HFD) is a program for setting the Hypex Electronics B.V. DSP amplifiers (all Hypex FusionAmps).

The two inputs can be connected to the left and right output of the preamplifier or to the LFE ("Low Frequency Effects" Dolby or "Low Frequency Enhancement" DTS) output from a receiver. The built-in amplifier of the Hypex FusionAmp FA501 can be connected to the drivers or to a complete loudspeaker / subwoofer.

technical data:

  • analog inputs: 2 x Cinch asymmetric (stereo / 1 x right + 1 x left) (54 kOhm)
  • analog inputs: 1 x XLR balanced (44 kOhm DM / 2,2 MOhm CM)
  • analog inputs: 2 x High Level
  • power consumption Powersafe: less than 0.5 W
  • parameter memory: 3 units (preset 1 - 3)
  • built-in power amplifiers: 1 x 500 Watt (4 Ohm)
  • dimensions (height x width x depth): 280 mm x 135 mm x 55 mm
  • weight: approx 925 g
  • Power supply: 100-120 V / 200-240 V
  • SNR AD/DA: -109dB
  • SNR DA: -111dB
  • THD (D+N) (@ -1dBFS) AD/DA: -100dB
  • THD (D+N) (@ -1dBFS) DA: -102.5dB
  • DSP: ADAU1450
  • ADC: AK5554
  • DAC: AK4454
  • SRC: SRC4382

other properties (choices):

  • input selection (CH input): Left (L) / Right (R) / Sum of both (L+R)
  • adjustable volume (volume) when switched on
  • adjustable delay 0 ... 19.2 ms (Delay)

price per unit   (Item no. hy-fa501) EUR 395,00 excl. VAT: € 331.93 / $ 368.45

USB cable to connect a PC (not included with the Hypex FusionAmp)

  • with plug USB-Mini-B (5 Pin) to plug USB-A
  • to connect the Hypex module with a PC
  • black, shielded cable
  • Lengths: 1,8 m

price per unit   (Item no. mo-063400) EUR 1,39 excl. VAT: € 1.17 / $ 1.30

power supply cable (please tell for which country; not included with the Hypex FusionAmp)

  • 3 x 1 mm2
  • Lengths: 1,5 m
  • black

price per unit   (Item no. st-BN207314) EUR 2,90 excl. VAT: € 2.44 / $ 2.71
 

Hypex FusionAmp 2 channel

FusionAmp FA122
enlarge

The Hypex FusionAmp FA122 is an amplifier with a 2 way Digital Signal Processor.

The Hypex FusionAmp FA122 is programmable via USB 2.0 using a PC. The Hypex Filter Designer (HFD) is a program for setting the Hypex Electronics B.V. DSP amplifiers (all Hypex FusionAmps).

The two inputs can be connected to the left and right output of the preamplifier. The built-in amplifier of the Hypex FusionAmp FA122 can be connected to the drivers or to a complete loudspeaker / subwoofer.

technical data:

  • analog inputs: 2 x Cinch asymmetric (stereo / 1 x right + 1 x left) (54 kOhm)
  • analog inputs: 1 x XLR balanced (44 kOhm DM / 2,2 MOhm CM)
  • S/PDIF input 192 kHz (75 kOhm)
  • S/PDIF output
  • AES input 110 kOhm
  • TosLink input 96 kHz
  • power consumption Powersafe: less than 0.5 W
  • parameter memory: 3 units (preset 1 - 3)
  • built-in power amplifiers: 2 x 125 Watt (4 Ohm) or 1 x 250 Watt (8 Ohm) or 1 x 200 Watt (4 Ohm)
  • dimensions (height x width x depth): 315 mm x 120 mm x 55 mm
  • weight: approx 815 g
  • Power supply: 100-120 V / 200-240 V
  • SNR AD/DA: -109dB
  • SNR DA: -111dB
  • THD (D+N) (@ -1dBFS) AD/DA: -100dB
  • THD (D+N) (@ -1dBFS) DA: -102.5dB
  • DSP: ADAU1450
  • ADC: AK5554
  • DAC: AK4454
  • SRC: SRC4382

other properties (choices):

  • input selection (CH input): Left (L) / Right (R) / Sum of both (L+R)
  • adjustable volume (volume) when switched on
  • adjustable delay 0 ... 19.2 ms (Delay)

price per unit   (Item no. hy-fa122) EUR 329,00 excl. VAT: € 276.47 / $ 306.88

USB cable to connect a PC (not included with the Hypex FusionAmp)

  • with plug USB-Mini-B (5 Pin) to plug USB-A
  • to connect the Hypex module with a PC
  • black, shielded cable
  • Lengths: 1,8 m

price per unit   (Item no. mo-063400) EUR 1,39 excl. VAT: € 1.17 / $ 1.30

power supply cable (please tell for which country; not included with the Hypex FusionAmp)

  • 3 x 1 mm2
  • Lengths: 1,5 m
  • black

price per unit   (Item no. st-BN207314) EUR 2,90 excl. VAT: € 2.44 / $ 2.71
 

FusionAmp FA252
enlarge

The Hypex FusionAmp FA252 is an amplifier with a 2 way Digital Signal Processor.

The Hypex FusionAmp FA252 is programmable via USB 2.0 using a PC. The Hypex Filter Designer (HFD) is a program for setting the Hypex Electronics B.V. DSP amplifiers (all Hypex FusionAmps).

The two inputs can be connected to the left and right output of the preamplifier. The built-in amplifier of the Hypex FusionAmp FA252 can be connected to the drivers or to a complete loudspeaker / subwoofer.

technical data:

  • analog inputs: 2 x Cinch asymmetric (stereo / 1 x right + 1 x left) (54 kOhm)
  • analog inputs: 1 x XLR balanced (44 kOhm DM / 2,2 MOhm CM)
  • S/PDIF input 192 kHz (75 kOhm)
  • S/PDIF output
  • AES input 110 kOhm
  • TosLink input 96 kHz
  • power consumption Powersafe: less than 0.5 W
  • parameter memory: 3 units (preset 1 - 3)
  • built-in power amplifiers: 2 x 250 Watt (4 Ohm) or 1 x 500 Watt (8 Ohm) or 1 x 400 Watt (4 Ohm)
  • dimensions (height x width x depth): 315 mm x 135 mm x 55 mm
  • weight: approx 1000 g
  • Power supply: 100-120 V / 200-240 V
  • SNR AD/DA: -109dB
  • SNR DA: -111dB
  • THD (D+N) (@ -1dBFS) AD/DA: -100dB
  • THD (D+N) (@ -1dBFS) DA: -102.5dB
  • DSP: ADAU1450
  • ADC: AK5554
  • DAC: AK4454
  • SRC: SRC4382

other properties (choices):

  • input selection (CH input): Left (L) / Right (R) / Sum of both (L+R)
  • adjustable volume (volume) when switched on
  • adjustable delay 0 ... 19.2 ms (Delay)

price per unit   (Item no. hy-fa252) EUR 459,00 excl. VAT: € 385.71 / $ 428.14

USB cable to connect a PC (not included with the Hypex FusionAmp)

  • with plug USB-Mini-B (5 Pin) to plug USB-A
  • for connecting the Hypex FusionAmp with USB mini B socket
  • black shielded cable
  • Lengths: 1,8 m

price per unit   (Item no. mo-063400) EUR 1,39 excl. VAT: € 1.17 / $ 1.30

power supply cable (please tell for which country; not included with the Hypex FusionAmp)

  • 3 x 1 mm2
  • Lengths: 1,5 m
  • black

price per unit   (Item no. st-BN207314) EUR 2,90 excl. VAT: € 2.44 / $ 2.71
 

FusionAmp FA502
enlarge

The Hypex FusionAmp FA502 is an amplifier with a 2 way Digital Signal Processor.

The Hypex FusionAmp FA502 is programmable via USB 2.0 using a PC. The Hypex Filter Designer (HFD) is a program for setting the Hypex Electronics B.V. DSP amplifiers (all Hypex FusionAmps).

The two inputs can be connected to the left and right output of the preamplifier. The built-in amplifier of the Hypex FusionAmp FA502 can be connected to the drivers or to a complete loudspeaker / subwoofer.

technical data:

  • analog inputs: 2 x Cinch asymmetric (stereo / 1 x right + 1 x left) (54 kOhm)
  • analog inputs: 1 x XLR balanced (44 kOhm DM / 2,2 MOhm CM)
  • S/PDIF input 192 kHz (75 kOhm)
  • S/PDIF output
  • AES input 110 kOhm
  • TosLink input 96 kHz
  • power consumption Powersafe: less than 0.5 W
  • parameter memory: 3 units (preset 1 - 3)
  • built-in power amplifiers: 2 x 500 Watt (4 Ohm) or 1 x 1200 Watt (8 Ohm) or 1 x 1000 Watt (4 Ohm)
  • dimensions (height x width x depth): 380 mm x 150 mm x 90 mm
  • weight: approx 2150 g
  • Power supply: 100-120 V / 200-240 V
  • SNR AD/DA: -109dB
  • SNR DA: -111dB
  • THD (D+N) (@ -1dBFS) AD/DA: -100dB
  • THD (D+N) (@ -1dBFS) DA: -102.5dB
  • DSP: ADAU1450
  • ADC: AK5554
  • DAC: AK4454
  • SRC: SRC4382

other properties (choices):

  • input selection (CH input): Left (L) / Right (R) / Sum of both (L+R)
  • adjustable volume (volume) when switched on
  • adjustable delay 0 ... 19.2 ms (Delay)

price per unit   (Item no. hy-fa502) EUR 589,00 excl. VAT: € 494.96 / $ 549.40

USB cable to connect a PC (not included with the Hypex FusionAmp)

  • with plug USB-Mini-B (5 Pin) to plug USB-A
  • to connect the Hypex module with a PC
  • black, shielded cable
  • Lengths: 1,8 m

price per unit   (Item no. mo-063400) EUR 1,39 excl. VAT: € 1.17 / $ 1.30

power supply cable (please tell for which country; not included with the Hypex FusionAmp)

  • 3 x 1 mm2
  • Lengths: 1,5 m
  • black

price per unit   (Item no. st-BN207314) EUR 2,90 excl. VAT: € 2.44 / $ 2.71
 

Hypex FusionAmp 3 channel

FusionAmp FA123
enlarge

The Hypex FusionAmp FA123 is an amplifier with a 3 way Digital Signal Processor.

The Hypex FusionAmp FA123 is programmable via USB 2.0 using a PC. The Hypex Filter Designer (HFD) is a program for setting the Hypex Electronics B.V. DSP amplifiers (all Hypex FusionAmps).

The two inputs can be connected to the left and right output of the preamplifier. This allows each pair of loudspeakers to be adapted to the room acoustics. The built-in amplifier of the Hypex FusionAmp FA123 can be connected to the drivers or to a complete loudspeaker.

technical data:

  • analog inputs: 2 x Cinch asymmetric (stereo / 1 x right + 1 x left) (54 kOhm)
  • analog inputs: 1 x XLR balanced (44 kOhm DM / 2,2 MOhm CM)
  • S/PDIF input 192 kHz (75 kOhm)
  • S/PDIF output
  • AES input 110 kOhm
  • TosLink input 96 kHz
  • power consumption Powersafe: less than 0.5 W
  • parameter memory: 3 units (preset 1 - 3)
  • built-in power amplifiers: 2 x 125 Watt (4 Ohm) und 1 x 100 Watt (4 Ohm)
  • dimensions (height x width x depth): 360 mm x 120 mm x 55 mm
  • weight: approx 955 g
  • Power supply: 100-120 V / 200-240 V
  • SNR AD/DA: -109dB
  • SNR DA: -111dB
  • THD (D+N) (@ -1dBFS) AD/DA: -100dB
  • THD (D+N) (@ -1dBFS) DA: -102.5dB
  • DSP: ADAU1450
  • ADC: AK5554
  • DAC: AK4454
  • SRC: SRC4382

other properties (choices):

  • input selection (CH input): Left (L) / Right (R) / Sum of both (L+R)
  • adjustable volume (volume) when switched on
  • adjustable delay 0 ... 19.2 ms (Delay)

price per unit   (Item no. hy-fa123) EUR 395,00 excl. VAT: € 331.93 / $ 368.45

USB cable to connect a PC (not included with the Hypex FusionAmp)

  • with plug USB-Mini-B (5 Pin) to plug USB-A
  • to connect the Hypex module with a PC
  • black, shielded cable
  • Lengths: 1,8 m

price per unit   (Item no. mo-063400) EUR 1,39 excl. VAT: € 1.17 / $ 1.30

power supply cable (please tell for which country; not included with the Hypex FusionAmp)

  • 3 x 1 mm2
  • Lengths: 1,5 m
  • black

price per unit   (Item no. st-BN207314) EUR 2,90 excl. VAT: € 2.44 / $ 2.71
 

FusionAmp FA253
enlarge

The Hypex FusionAmp FA253 is an amplifier with a 3 way Digital Signal Processor.

The Hypex FusionAmp FA253 is programmable via USB 2.0 using a PC. The Hypex Filter Designer (HFD) is a program for setting the Hypex Electronics B.V. DSP amplifiers (all Hypex FusionAmps).

The two inputs can be connected to the left and right output of the preamplifier. The built-in amplifier of the Hypex FusionAmp FA253 can be connected to the drivers or to a complete loudspeaker / subwoofer.

technical data:

  • analog inputs: 2 x Cinch asymmetric (stereo / 1 x right + 1 x left) (54 kOhm)
  • analog inputs: 1 x XLR balanced (44 kOhm DM / 2,2 MOhm CM)
  • S/PDIF input 192 kHz (75 kOhm)
  • S/PDIF output
  • AES input 110 kOhm
  • TosLink input 96 kHz
  • power consumption Powersafe: less than 0.5 W
  • parameter memory: 3 units (preset 1 - 3)
  • built-in power amplifiers: 2 x 250 Watt (4 Ohm) und 1 x 100 Watt (4 Ohm)
  • dimensions (height x width x depth): 360 mm x 135 mm x 55 mm
  • weight: approx 1145 g
  • Power supply: 100-120 V / 200-240 V
  • SNR AD/DA: -109dB
  • SNR DA: -111dB
  • THD (D+N) (@ -1dBFS) AD/DA: -100dB
  • THD (D+N) (@ -1dBFS) DA: -102.5dB
  • DSP: ADAU1450
  • ADC: AK5554
  • DAC: AK4454
  • SRC: SRC4382

other properties (choices):

  • input selection (CH input): Left (L) / Right (R) / Sum of both (L+R)
  • adjustable volume (volume) when switched on
  • adjustable delay 0 ... 19.2 ms (Delay)

price per unit   (Item no. hy-fa253) EUR 525,00 excl. VAT: € 441.18 / $ 489.71

USB cable to connect a PC (not included with the Hypex FusionAmp)

  • with plug USB-Mini-B (5 Pin) to plug USB-A
  • to connect the Hypex module with a PC
  • black shielded cable
  • Lengths: 1,8 m

price per unit   (Item no. mo-063400) EUR 1,39 excl. VAT: € 1.17 / $ 1.30

power supply cable (please tell for which country; not included with the Hypex FusionAmp)

  • 3 x 1 mm2
  • Lengths: 1,5 m
  • black

price per unit   (Item no. st-BN207314) EUR 2,90 excl. VAT: € 2.44 / $ 2.71
 

FusionAmp FA503
enlarge

The Hypex FusionAmp FA503 is an amplifier with a 3 way Digital Signal Processor.

The Hypex FusionAmp FA503 is programmable via USB 2.0 using a PC. The Hypex Filter Designer (HFD) is a program for setting the Hypex Electronics B.V. DSP amplifiers (all Hypex FusionAmps).

The two inputs can be connected to the left and right output of the preamplifier. The built-in amplifier of the Hypex FusionAmp FA503 can be connected to the drivers or to a complete loudspeaker / subwoofer.

technical data:

  • analog inputs: 2 x Cinch asymmetric (stereo / 1 x right + 1 x left) (54 kOhm)
  • analog inputs: 1 x XLR balanced (44 kOhm DM / 2,2 MOhm CM)
  • S/PDIF input 192 kHz (75 kOhm)
  • S/PDIF output
  • AES input 110 kOhm
  • TosLink input 96 kHz
  • power consumption Powersafe: less than 0.5 W
  • parameter memory: 3 units (preset 1 - 3)
  • built-in power amplifiers: 2 x 500 Watt (4 Ohm) und 1 x 100 Watt (4 Ohm)
  • dimensions (height x width x depth): 420 mm x 150 mm x 90 mm
  • weight: approx 2275 g
  • Power supply: 100-120 V / 200-240 V
  • SNR AD/DA: -109dB
  • SNR DA: -111dB
  • THD (D+N) (@ -1dBFS) AD/DA: -100dB
  • THD (D+N) (@ -1dBFS) DA: -102.5dB
  • DSP: ADAU1450
  • ADC: AK5554
  • DAC: AK4454
  • SRC: SRC4382

other properties (choices):

  • input selection (CH input): Left (L) / Right (R) / Sum of both (L+R)
  • adjustable volume (volume) when switched on
  • adjustable delay 0 ... 19.2 ms (Delay)

price per unit   (Item no. hy-fa503) EUR 655,00 excl. VAT: € 550.42 / $ 610.97

USB cable to connect a PC (not included with the Hypex FusionAmp)

  • with plug USB-Mini-B (5 Pin) to plug USB-A
  • to connect the Hypex module with a PC
  • black shielded cable
  • Lengths: 1,8 m

price per unit   (Item no. mo-063400) EUR 1,39 excl. VAT: € 1.17 / $ 1.30

power supply cable (please tell for which country; not included with the Hypex FusionAmp)

  • 3 x 1 mm2
  • Lengths: 1,5 m
  • black

price per unit   (Item no. st-BN207314) EUR 2,90 excl. VAT: € 2.44 / $ 2.71
 

Hypex Remote Control

Hypex remote Control

The Hypex Remote control is a remote control which can be used in combination with the DLCP add on set or the Fusion Amp remote kit (see below) to control volume, source and put the system into standby.

(Item no. hy-remote) EUR 19,50 excl. VAT: € 16.39 / $ 18.19
Hypex Fusion Kit

Hypex Fusion Remote kit

All models of the FusionAmp range can be extended with this Fusion Remote Kit. This set contains a PCBA with IR receiver and bi-colour LED, a plexiglas front with double adhesive tape, 2 lightpipes ,the necessary cable (125cm) and screws.

You can mount this kit from the inside or outside of the speaker cabinet.

This set must be used in master devices if the Hypex remote is to be used (remote not included, see above). Furthermore, this set can also be added in slave devices, but the IR functionality will be disabled. The green LED acts as on-off indicator, the red LED mirrors the protect indicator.

The set includes:

  • Screws
  • PCBA with IR receiver, bi-colour LED
  • Plexiglas front
  • sheet of double adhesive tape
  • 2pcs light pipes
  • 5 pin cable 125cm

(Item no. hy-fusion-remote-kit) EUR 25,50 excl. VAT: € 21.43 / $ 23.79


For questions and more information please call us: +49 721 970 37 24.

Or you send us an email: info@lautsprechershop.de