Lancetta 2   Floorstanding as in Hobby Hifi 5/2019

Technical data
  • impedance: 8 Ohm
  • sensivity (2,83V/1m): 80 dB
  • size (HxWxD): 1350 x 120 x 198 mm
  • frequency range (-8dB): 48 - 26000 Hz
  • crossover frequency(s): Hz
  • speaker type: transmission line
Enlarge

Lancetta 2 is a floorstanding loudspeaker with a full range driver.

Lancetta 2 is a transmission-line loudspeaker with drivers of Omnes Audio .

The kit is delivered with a Omnes Audio BB3 AL full range driver

The loudspeaker has been developed by Bernd Timmermanns.

The crossover consists of:
- a blocking circuit in series with the full range driver.

The frequency response of this speaker is nearly linear.

At 90 dB and 1 m, nonlinear distortions are below 0,3 % almost everywhere above 200 Hz.

Our kit consists of

  • Omnes Audio, full range BB3 AL
  • 0,5x PE sealing tape, 5x2 mm, 7.5 m
  • Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK31, gold plated (one pair, red and black)
  • 1,5m Speaker cable 2x1.5 mm2, transparent
  • 0,5x Pan screws 3.5x17 black, torx, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • electrolytic capacitor, unetched, 10 μF / 70 Vdc
  • 1.0 mm air core coil, 0.47 mH/0.32 Ohm
  • Metal-oxide resistor, 10W 6.8 Ohm (blue-grey-gold)

Kit without cabinet, price per speaker   EUR 52,64 excl. VAT: € 45.38 / $ 53.09

Kit with high-end crossover

The high-end kit is delivered with Mundorf Hepta Coil. The capacitors for the Omnes Audio BB3 AL is of type polypropylen (MKP) Mndorf Mcap EVO Oil.

Kit with high-end-crossover without cabinet, price per speaker   EUR 78,86 excl. VAT: € 67.98 / $ 79.54

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 4,58 excl. VAT: € 3.95 / $ 4.62

universal PCB

If you prefer to mount the crossover components on a 140 x 102 mm universal PCB instead on wood:
Universal PCB RA140, order no.. I-2765, price per unit:   EUR 3,61 excl. VAT: € 3.11 / $ 3.64
We recommend one board per kit (two boards for a speaker pair)


Home   Hobby HiFi Overview