Milan Aktionsangebot   Shelf speaker as in K+T 6/2024

Technical data
  • impedance: 5 Ohm
  • sensivity (2,83V/1m): 85 dB
  • size (HxWxD): 325 x 200 x 260 mm
  • frequency range (-8dB): 50 - 27000 Hz
  • crossover frequency(s): 3000 Hz
  • speaker type: bass reflex
Enlarge

Milan is a two way compact speaker.

Milan is a bass-reflex cabinet loudspeaker with drivers of Wavecor .

The kit is delivered with the following drivers:
- a Wavecor TW022WA04 tweeter
- a Wavecor WF146WA05 woofer

The loudspeaker has been developed by Thomas Schmidt and Michael Rochow.

The crossover consists of:
- a 2nd order high-pass filter (12 dB per octave slope) for the tweeter.
- a 2nd order low-pass filter (12 dB per octave slope) for the woofer.

The frequency response of this speaker is nearly linear.

The decay spectrum is nearly perfect.

At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 0,5% above 300 Hz and doesn't exceed 1,6% at 95 dB at 1 m between 300 and 15000 Hz.

Our kit consists of

  • 2x Wavecor Mid/Woofer WF146WA05 glass fiber, 4 Ohm (bulk)
  • 2x Wavecor silk dome tweeter TW022WA04, 4 Ohm (bulk)
  • 4x Bass reflex tube HP50, 50x143mm, black
  • 2x Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
  • Damping Sonofil 100 x 35 cm for 20 litres
  • 2x Binding Post PK31, gold plated (one pair, red and black)
  • 2m Speaker cable 2x1.5 mm2, transparent
  • 2x Pan screws 3.5x17 black, torx, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • 2x Audaphon MKP CAP Superior 3.9 μF / 400 Vdc
  • 2x Audaphon MKT CAP 15 μF / 160 Vdc
  • 2x 1.4 mm air core coil 1.2 mH/0.32 Ohm
  • 2x 0.7 mm air core coil, 0.47 mH/0.50 Ohm

Kit without cabinet, price per pair   EUR 194,00 excl. VAT: € 163.03 / $ 179.33

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).

  • Audaphon MKT CAP 33 μF / 160 Vdc
  • 0.7 mm air core coil, 0.10 mH/0.27 Ohm
  • ceramic resistor 6.8 Ohm/20 Watt

Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 15,37 excl. VAT: € 12.92 / $ 14.21

universal PCB

If you prefer to mount the crossover components on a 140 x 102 mm universal PCB instead on wood:
Universal PCB RA140, order no.. str-RA140, price per unit:   EUR 4,20 excl. VAT: € 3.53 / $ 3.88
We recommend one board per kit (two boards for a speaker pair)


Home   Klang+Ton Overview