Monacor Soundbar is an two way F-A.S.T speaker (Fullrange and subwoofer technology) with drivers from Monacor. The kit is delivered with fullrange driver Monacor SPX-31M and woofer Monacor Raptor-6.
Monacor Soundbar has been developed by Steffen Kluge.
The crossover consists of a first order high-pass filter (6 dB per octave slope) for the fullrange driver. The woofers are connected to a first order low-pass filter (6 dB per octave slope).
The frequency response of this speaker is nearly linear, except above 8000 Hz. The decay spectrum shows two small artefacts at 1 and 2 kHz. At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 1% above 300 Hz.
the crossover components (right), to be mounted on a small wooden board.
Kit without cabinet, price per unit / speaker set - not available
The high-end kit is delivered with a ferrite core coil with low DC resistance. Instead of electrolytic capacitors we deliver foil capacitors of ClarityCap.
Kit with high-end-crossover without cabinet, price per speaker - not available
If you prefer to mount the crossover components on a 140 x 102 mm universal PCB instead on wood: Universal PCB RA140, order no.. str-RA140, price per unit: EUR 4,20 excl. VAT: € 3.53 / $ 3.85 We recommend one board per kit (two boards for a speaker pair)
Home Klang+Ton Overview