Omnes Black Array is a two way compact speaker.
Omnes Black Array is a closed-cabinet loudspeaker with drivers of Omnes Audio .
The kit is delivered with the following drivers:
- four Omnes Audio T25 H tweeter
- four Omnes Audio MW 5.4 woofers
The loudspeaker has been developed by Omnes Audio.
The crossover consists of:
- a 2nd order high-pass filter (12 dB per octave slope) for the tweeter.
- a 2nd order low-pass filter (12 dB per octave slope) for the woofer.
The frequency response of this speaker is nearly linear.
The decay spectrum is nearly perfect.
At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 0,4% above 300 Hz and doesn't exceed 0,4% at 95 dB at 1 m between 300 and 15000 Hz.
the crossover components (right),
to be mounted on a small wooden board.
Kit without cabinet, price per speaker EUR 381,00 excl. VAT: € 320.17 / $ 345.78
The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the Omnes Audio T25 H are of type polypropylen (MKP) Clarity-Cap CSA 630 V.
Kit with high-end-crossover without cabinet, price per speaker EUR 461,00 excl. VAT: € 387.39 / $ 418.39
If you prefer to mount the crossover components on a 140 x 102 mm universal PCB instead on wood:
Universal PCB RA140, order no.. str-RA140, price per unit: EUR 4,20 excl. VAT: € 3.53 / $ 3.81
We recommend one board per kit (two boards for a speaker pair)