OnePoint10 Block is a two way compact speaker.
OnePoint10 Block is a bass-reflex cabinet loudspeaker with drivers of Omnes Audio .
The kit is delivered with the following drivers:
- a Omnes Audio CX10 coaxial driver
The loudspeaker has been developed by Blue Planet Acoustic.
The crossover consists of:
- a 2nd order high-pass filter (12 dB per octave slope) for the tweeter.
- a 2nd order low-pass filter (12 dB per octave slope) for the woofer.
The frequency response of this speaker is nearly linear.
The decay spectrum is nearly perfect.
At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 1% above 200 Hz and doesn't exceed 3% at 95 dB at 1 m between 300 and 15000 Hz.
the crossover components (right),
to be mounted on a small wooden board.
Kit without cabinet, price per speaker EUR 353,00 excl. VAT: € 296.64 / $ 358.93
The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the Omnes Audio CX10 Tweeter are of type polypropylen (MKP) Clarity-Cap ESA 630 V.
Kit with high-end-crossover without cabinet, price per speaker EUR 418,00 excl. VAT: € 351.26 / $ 425.03
If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).
If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 150x115 mm, tin plated, price per unit: EUR 4,70 excl. VAT: € 3.95 / $ 4.78
We recommend one board per kit (2 boards per speaker pair)