Peter Mini   Shelf speaker as in newsletter

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 84 dB
  • size (HxWxD): 200 x 120 x 200 mm
  • frequency range (-8dB): 56 - 24000 Hz
  • crossover frequency(s): 4000 Hz
  • speaker type: bass reflex

Peter Mini is a two way compact speaker.

Peter Mini is a bass-reflex cabinet loudspeaker with drivers of SEAS and Wavecor.

The kit is delivered with the following drivers:
- a SEAS TFFNC/G (H1396-04) tweeter
- a Wavecor WF118WA07 woofer

The loudspeaker has been developed by Dennis Frank and Daniel Gattig.

The crossover consists of:
- a 3rd order high-pass filter (18 dB per octave slope) for the tweeter.
- a 2nd order low-pass filter (12 dB per octave slope) for the woofer.

The frequency response of this speaker is perfectly linear.

The decay spectrum is nearly perfect.

Our kit consists of

  • Seas 27TFFNC/G (H1396-04)
  • Wavecor Mid/Woofer WF118WA07 papier, 4 Ohm
  • 2x Bass reflex tube HP35, 35x125 mm, black
  • 0,5x Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
  • Binding Post PK31, gold plated (one pair, red and black)
  • 1m Speaker cable 2x1.5 mm2, transparent
  • 0,5x Pan screws 4x20 black, torx, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • Audaphon MKP CAP Superior 3.9 μF / 400 Vdc
  • Audaphon MKP CAP Superior 4.7 μF / 400 Vdc
  • JB, electrolytic capacitor, bipolar advanced, 15uF / 50 Vdc
  • JB, electrolytic capacitor, bipolar advanced, 33uF / 50 Vdc
  • 1.0 mm air core coil, 0.47 mH/0.32 Ohm
  • 0.7 mm air core coil, 0.18 mH/0.36 Ohm
  • 0.7 mm air core coil, 0.47 mH/0.50 Ohm
  • Metal-oxide resistor, 10W 4.7 Ohm (yellow-violet-gold)
  • Metal-oxide resistor, 5W 6.8 Ohm (blue-grey-gold)
  • Metal-oxide resistor, 5W 15 Ohm (brown-green-black)

Kit without cabinet, price per speaker   EUR 185,00 excl. VAT: € 155.46 / $ 166.34

Kit with high-end crossover

The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the SEAS TFFNC/G (H1396-04) are of type polypropylen (MKP) Clarity-Cap ESA 250 V.

Kit with high-end-crossover without cabinet, price per speaker   EUR 213,00 excl. VAT: € 178.99 / $ 191.52

universal PCB

If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 150x115 mm, tin plated, price per unit:   EUR 4,70 excl. VAT: € 3.95 / $ 4.23
We recommend a half board per kit (1 boards per speaker pair)