A/O - Puppy or Watt Klang+Ton 6/07 + 1/08 + 2/08

A/O Puppy oder watt aus Zeitschrift K+T 1/2008
Technical data
- size (HxWxD): 105 x 36 x 57,4 cm
- impedance: 3 Ohm
- sensitivity (2.83V/1m): 88 dB
- crossover frequencies: ?
- frequency range (-8dB): 31-25 000 Hz
- speaker type: 3 way bass reflex
Equipped with
- Visaton KE 25 SC,
- Scan Speak 18W/8545 K00 and
- 2 x TIW 200 XS
- Holger Barske and Christian Gather designed an impressive and enormous loudspeaker (Klang+Ton 6/07 + 1/08 + 2/08).

Watt/Puppy System 8 by Wilson Audio was the inspiration for the two Klang+Ton editors; the design resembles the famous Wilson speaker, at least from an appearance point of view.

Our kit consists of:

  • 1x Visaton KE 25 SC
  • 1x Scan Speak 18W/8545 K00
  • 2x Visaton TIW 200 XS
  • one mat nap foam
  • 6 bags damping material
  • 6 binding posts
  • 24 PAN screws
  • 4 metres loudspeaker cable 2x 2.5 mm2
  • self-adhesive sealing tape
  • the Klang+Ton building instruction
  • right:the crossover components to be mounted on wood:
  • 4.7 mH T96 transformer core coil / 0.27 Ohm
    (the coil with 0.17 Ohm is no longer produced)
  • 0.39 mH cfc14 copper foil coil
  • 0.39 mH cfc16 copper foil coil
  • 3x 100 μF ClarityCap PWA /160V
  • 56 μF Mundorf MCAP
  • 22 μF Mundorf MCAP
  • 2.7 μF MCAP Supreme
  • 1.8 Ohm Mundorf top resistor MR

Price of A/O kit without cabinet per unit: - not available

Important note: quite a few components from a building supplies store are needed to build this speaker.

A/O with high-end-crossover

If you require high grade crossover components we recommend our high-end kit with cfc copper foil bobbin in the transformer coil and a silver/oil Mundorf capacitor:
  • 4.7 mH CFN84 transformer core coil
  • 0.39 mH cfc14 copper foil coil
  • 0.39 mH cfc16 copper foil coil
  • 3x 100 μF ClarityCap PWA /160V
  • 56 μF Mundorf MCAP
  • 22 μF Mundorf MCAP
  • 2.7 μF Mundorf MCap Sup silver/oil
  • 1.8 Ohm Mundorf top resistor

Price of A/O high-end kit without cabinet per unit: - not available

Important note: quite a few components from a building supplies store are needed to build this speaker.

Home   Klang+Ton Overview