Rana   Floorstanding as in K+T 1/2018

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 89 dB
  • size (HxWxD): 1350 x 250 x 400 mm
  • frequency range (-8dB): 29 - 35000 Hz
  • crossover frequency(s): 1400 Hz
  • speaker type: bass reflex
Enlarge

Rana is a two way floorstanding speaker with an outstanding price performance ratio. Rana offers enormous low bass.

Rana is a bass-reflex cabinet loudspeaker with drivers of Wavecor .

The kit is delivered with the following drivers:
- a Wavecor TW030WA11 tweeter
- two Wavecor WF182CU12 woofers

The loudspeaker has been developed by Dennis Frank and Daniel Gattig.

The crossover consists of:
- a first order high-pass filter (6 dB per octave slope) for the tweeter.
- a first order low-pass filter (6 dB per octave slope) for the woofer.

The frequency response of this speaker is perfectly linear.

The decay spectrum is perfect.

At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 0.2% above 300 Hz and doesn't exceed 0.3% at 95 dB at 1 m between 300 Hz and 8000 Hz. That is quite splendid.

Our kit consists of

  • Wavecor silk dome tweeter TW030WA11, 4 Ohm
  • 2x WF182CU12, Wavecor Mid/Woofer, 8 Ohm, paper / glass fiber, BD, phase plug
  • Bass reflex tube HP100, 100x200 mm, black
  • 3x Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
  • 3x Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK28 I, gold plated (one pair, red and black)
  • 3m Speaker cable 2x1.5 mm2 black/red
  • 1.5x Pan screws 3.5x17 black, 8 pieces
  • 0.5x Pan screws 4x20 black, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • Audaphon MKP CAP Superior 2.2 μF / 400 Vdc
  • Audaphon MKP CAP Superior 10 μF / 400 Vdc
  • Audaphon MKT CAP 4.7 μF / 160 Vdc
  • Audaphon MKT CAP 68 μF / 160 Vdc
  • 1.3 mm air core coil, 1.5 mH/0.40 Ohm
  • 0.7 mm air core coil, 0.22 mH/0.39 Ohm
  • 0.7 mm air core coil, 1.5 mH/1.13 Ohm
  • Metal-oxide resistor, 10W 1.5 Ohm (brown-green-gold)
  • Metal-oxide resistor, 10W 3.3 Ohm (orange-orange-gold)
  • Metal-oxide resistor, 10W 4.7 Ohm (yellow-violet-gold)

Kit without cabinet, price per speaker   EUR 728,00 excl. VAT: € 611.76 / $ 648.47

Kit with high-end crossover

The high-end kit is delivered with baked varnish air core coils or even copper foil coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors in series to the tweeter are of type polypropylen (MKP) Clarity-Cap CSA 630 V, elsewhere clarity cap PWA 160 V.

Kit with high-end-crossover without cabinet, price per speaker   EUR 846,00 excl. VAT: € 710.92 / $ 753.58

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 23,70 excl. VAT: € 19.92 / $ 21.11

universal PCB

If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 150x115 mm, tin plated, price per unit:   EUR 4,70 excl. VAT: € 3.95 / $ 4.19
We recommend two boards per kit (4 boards per speaker pair)


Home   Klang+Ton Overview