Ti Monitor   Shelf speaker as in K+T 1/2017

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 89 dB
  • size (HxWxD): 598 x 340 x 299 mm
  • frequency range (-8dB): 45 - 21000 Hz
  • crossover frequency(s): 600, 4000 Hz
  • speaker type: closed box
Enlarge

Ti Monitor is a 3 way monitor with mid and highrange adjustment. The kit provides the titan dome tweeter Visaton DSM 25 FFL and the titan dome midrange Visaton DSM 50 FFL. Viston W 250 S 4 Ohm is used for the bassrange .

Ti Monitor has been developed by Thomas Schmidt.

The crossover consists of a 3rd order high-pass filter (18 dB per octave slope) for the tweeter. A Visaton LC-57 is used for the sound adjustment. The midrange is connected to a 2nd order band-pass filter (12 dB per octave slope). A Visaton LC-57 is used for the sound adjustment of the midrange. The woofer is connected to a 2nd order low-pass filter (12 dB per octave slope).

Between 80 Hz and 20000 Hz, the frequency response of this loudspeaker is nearly linear on axis. The decay spectrum is nearly perfect. At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are lower than 0.7 % above 300 Hz and below 1 % at 95 dB at 1 m .

Our kit consists of

  • Visaton DSM 25 FFL, 8 Ohm
  • Visaton DSM 50 FFL.8 Ohm
  • Visaton W250 S, 4 Ohm
  • 3x Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
  • 0,5x PE sealing tape, 5x2 mm, 7.5 m
  • 3x Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK31, gold plated (one pair, red and black)
  • 3m Speaker cable 2x1.5 mm2, transparent
  • Pan screws 4x20 black, cross recess, 8 pieces
  • Visaton Countersunk screws 3.5x25, 8 pcs
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • Audaphon MKP CAP Superior 3.9 μF / 400 Vdc
  • Audaphon MKP CAP Superior 8.2 μF / 400 Vdc
  • Audaphon MKP CAP Superior 15 μF / 400 Vdc
  • Audaphon MKT CAP 3.9 μF / 160 Vdc
  • electrolytic capacitor, unetched, 82uF / 50 Vdc
  • Mundorf air core coil L140, 2.2 mH/0.46 Ohm
  • 1.0 mm air core coil, 0.68 mH/0.39 Ohm
  • 0.7 mm air core coil, 0.18 mH/0.36 Ohm
  • Mundorf ferrite core coil F71 1.2mH/0.54Ohm
  • 2x Visaton Volume control mono LC 57

Kit without cabinet, price per speaker   EUR 500,00 excl. VAT: € 420.17 / $ 453.78

Instead of Damping 30, we deliver the cheaper Bondum 800 with similar damping properties.

Kit with high-end crossover

The high-end kit is delivered with baked varnish air core coils for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. All capacitors are of type polypropylen (MKP) and in series to the tweeter Clarity-Cap ESA 250 V are employed.

Kit with high-end-crossover without cabinet, price per speaker   - not available

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 30,20 excl. VAT: € 25.38 / $ 27.41

universal PCBs

If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 220x155 mm, order no. I-8805002, price per unit:   EUR 11,80 excl. VAT: € 9.92 / $ 10.71
We recommend one board per kit (two boards for a speaker pair)


Home   Klang+Ton Overview