Triple Play Coax is a three way compact speaker.
Triple Play Coax is a bass-reflex cabinet loudspeaker with drivers of Celestion and Monacor.
The kit is delivered with the following drivers: - a Celestion TFX0615 coaxial driver - two Monacor SPH-6M woofers
The loudspeaker has been developed by Frank Kuhl.
The crossover consists of: - a 2nd order high-pass filter (12 dB per octave slope) for the tweeter. - a band pass consisting of a 1st order high pass filter (6 dB per octave slope) and a 2nd order low-pass filter (12 dB per octave slope) for the mids-woofer. - a 2nd order low-pass filter (12 dB per octave slope) for the woofer.
The frequency response of this speaker is nearly linear.
The decay spectrum is nearly perfect.
At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 0,6% above 300 Hz and doesn't exceed 2% at 95 dB at 1 m between 300 and 15000 Hz.
the crossover components (right), to be mounted on a small wooden board.
Kit without cabinet, price per speaker EUR 389,00 excl. VAT: € 326.89 / $ 356.31
The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the Celestion TFX0615 are of type polypropylen (MKP) Clarity-Cap CSA 250 V.
Kit with high-end-crossover without cabinet, price per speaker EUR 444,00 excl. VAT: € 373.11 / $ 406.69
If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).
Price per impedance correction for one speaker, to be mounted on a small wooden board. EUR 9,20 excl. VAT: € 7.73 / $ 8.43
If you prefer to mount the crossover components on a universal PCB instead on wood PCB 220x155 mm, order no. I-8805002, price per unit: EUR 11,80 excl. VAT: € 9.92 / $ 10.81 We recommend one board per kit (2 boards per speaker pair)
Home Klang+Ton Overview