Measurements Vardar

Here you can find the measurements for the kit Vardar.

The measurements are made with the Clio FW measurement system from Audiomatica

The measuring amplifier is a Clio QC-Box 5. This control unit performs a variety of tasks, e.g. controlling a laser, controlling turntables, etc.

For the measurements a calibrated Audiomatica Mic-01 with a length of 25 cm is used.

Frequency response

Frequency response measured at 0°, 15°, 30° and 45° angle

• Blue = 0°
• Green = 15°
• Red = 30°
• Violet = 45°

Frequency response of the individual circuits

Frequency response of the individual paths (for each driver)

• Blue = Sum of tweeter, mids and woofer measured on axis
• Green = high frequency branch
• Violet = Midtone branch
• Red = low frequency branch

Waterfall spectrum

Impedance frequency response

• Blue = without impedance correction
• Red = with impedance correction

Frequency response of the tweeter

• Blue = with crossover
• Orange = without crossover

Frequency response of the mids-woofer

• Blue = with crossover
• Orange = without crossover

Frequency response of the mids-woofer with trap circuit

• Blue = with trap circuit
• Orange = without trap circuit

Frequency response of the woofer

• Blue = with crossover
• Orange = without crossover

Frequency response of the woofer with trap circuit

• Blue = with trap circuit
• Orange = without trap circuit

For questions and more information please call us: +49 721 970 37 24

You can also send us an email: info@lautsprechershop.de

to the assembly kit Vardar