ViDipol DSP   Floorstanding as in Hobby Hifi 2/2020

ViDipol DSP is a two way floorstanding speaker.

ViDipol DSP is a bass-reflex cabinet loudspeaker with drivers of Visaton. The mids tweeter is working without cabinet (dipol)

The from Hobby HiFi used AMP-2200 is for powering the subwoofers only. For the fullrange drivers you need additionally a two channel amplifier with separable preamplifier and power amplifier. The Audaphon AMP 4250 has a DSP controlled RCA output to connect the external power amplifier.

For alternative we offer a kit with the Audaphon AMP-4250. This amplifier can also power up the fullrange drivers and you just need a preamlifier.

The kit is delivered with the following drivers:
- a Visaton B 100, 6 Ohm full range driver
- a Visaton TIW 200 XS, 8 Ohm subwoofer

The loudspeaker has been developed by Bernd Timmermanns.

The frequency response of this speaker is perfectly linear.

The decay spectrum is nearly perfect.

At medium volume, i.e. 90 dB at 1 m, the nonlinear distortions are below 1,1% above 200 Hz.

Our kit consists of

• 2x Visaton full range driver B 100 - 6 Ohm
• 2x Visaton woofer TIW 200 XS, 8 Ohm
• Audaphon AMP-2200, 2 x 200 Watt, DSP, silver, usb cable
• 2x Bass reflex tube BR25.50, black
• 4x Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
• PE sealing tape, 5x2 mm, 7.5 m
• Audaphon Damping 10, 970 x 470 mm, adhesive
• 6x Binding Post PK31, gold plated (one pair, red and black)
• 4m Speaker cable 2x2.5 mm2, transparent
• Pan screws 3.5x17 black, torx, 8 pieces
• 4x Pan screws 4x20 black, torx, 8 pieces
• Plan for DIY kit

Kit without cabinet, price per pair   EUR 1132,00 excl. VAT: € 951.26 / $ 1017.85

For use you need additional a two channel amplifier with separable preamplifier and power amplifier.

Our kit consists of

Kit without cabinet, price per pair   - not available

You need a preamplifier to use this kit.

Home   Hobby HiFi Overview