Vintage-DSP   Shelf speaker as in K+T 4/2021

Technical data
  • impedance: 8 Ohm
  • sensivity (2,83V/1m): dB
  • size (HxWxD): 297 x 200 x 183 mm
  • frequency range (-8dB): 40 - 40000 Hz
  • crossover frequency(s): 3000 Hz
  • speaker type: bass reflex

Vintage-DSP is a two way compact speaker.

Vintage-DSP is a bass-reflex cabinet loudspeaker with drivers of Dayton Audio .

The kit is delivered with the following drivers:
- a Dayton Audio TD20F-4 tweeter
- a Dayton Audio RS125P-8 mids driver

The loudspeaker has been developed by Michael Schmitz and Thomas Schmidt.

For Vintage-DSP you need additionally an 4 channel amplifier. The amplifier in the picture is not part of the kit

The frequency response of this speaker is nearly linear.

The decay spectrum (waterfall spectrum) shows a decelerated swing-out behaviour in the mid-range.

At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 0.8% above 300 Hz and doesn't exceed 2,3% at 95 dB at 1 m between 300 and 15000 Hz.

Our kit consists of

  • 2x Dayton Audio RS125P-8 5 inch Reference Paper Midwoofer 8 Ohm
  • 2x Dayton Audio TD20F-4
  • Mini DSP 2X4 HD
  • 2x Bass reflex tube HP35, 35x123mm, black
  • 2x Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
  • PE sealing tape, 5x2 mm, 7.5 m
  • 0,5x Damping Sonofil 100 x 35 cm for 20 litres
  • 2x Bi-wiring Terminal T122 Au with brass, gold plated
  • 3m Speaker cable 2x1.5 mm2, transparent
  • 3,5x Pan screws 3.5x17 black, torx, 8 pieces
  • Plan for DIY kit

Kit without cabinet, price per pair   EUR 446,00 excl. VAT: € 374.79 / $ 404.77

For Vintage-DSP you need additionally an 4 channel amplifier. The amplifier in the picture is not part of the kit.

Home   Klang+Ton Overview