Visaton Zyklop   Shelf speaker as in Hobby Hifi 6/2014

Technical data
  • impedance: 6 Ohm
  • sensivity (2,83V/1m): 84 dB
  • size (HxWxD): 396 x 450 x 400 mm
  • frequency range (-8dB): 34 - 30000 Hz
  • crossover frequency(s): 280 Hz
  • speaker type: bass reflex

Visaton Zyklop is designed by Sebastian Beyer of Visaton. It contains a fullrange speaker Visaton B80 and a subwoofer Visaton TIW 200 XS.

An excerpt from the Klang+Ton review

"In our listening room we placed the Cyclops on 60 cm high Apollo stands, filled with sand and steel-shot, their heavy-weight formed an acoustically perfect foundation. When angled facing towards the listening position they gave the best impression. It was obvious: the full range drivers beam frequencies above 5000Hz so much that off the main axis the higher frequencies are at a disadvantage. Their apperance in the listening room stunned the audience from the first moment. The Cyclops scored points with their near perfect tonal balance. They offer tight, punchy and clear bass that is considerably deep. The midrange fascinates with its natural tonal colour. Vocals in every range sound authentic and life-like. The treble sounds round and fine, like you get from good dome tweeters. The full range drivers create wonderfully fine rendered detail. Spatial imaging impresses with an exceptionally broad spread image in combination with credible depth. Like with symmetrical MTM configurations such as a D 'Appolito, the image is focussed relatively far forward, but without compromising on a respectable image depth. The Cyclops stay amazingly stable even at higher sound levels. This was demonstrated with Charly Antolini, we could start with his drums at full force and were experiencing realistic flow. The drum-head of the bass drum was taut, and the big drum thrilled us with an implusive force. On a more calm note, Renaud Garcia-Fons' five-string double bass stood impressively full in the room, sounding tight and powerful."

Conclusion of the magazine Klang+Ton:

"With the loudspeaker kit Cyclops, Visaton expands its programme with a superb sounding F.A.S.T. system. If you are not put off by the somewhat complex cabinet construction, you are rewarded with a pair of high quality loudspeakers that also have a lot to offer visually."

Our kit consists of

  • Visaton fullrange B 80
  • Visaton woofer TIW 200 XS, 8 Ohm
  • 2x Damping Sonofil 100 x 35 cm for 20 litres
  • Bi-wiring Terminal T122 Au with brass, gold plated
  • 3m Speaker cable 2x1.5 mm2, transparent
  • Allen wood screws, black, 5x30 mm, 8 pieces
  • Allen wood screws, black, 4x25 mm, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a piece of wood
  • Audaphon MKT CAP 15 μF / 160 Vdc
  • Audaphon MKT CAP 68 μF / 160 Vdc
  • electrolytic capacitor, etched, 150 μF/63 Vdc
  • electrolytic capacitor, etched, 330 μF/63 Vdc
  • electrolytic capacitor, unetched, 100uF / 50 Vdc
  • 0.7 mm air core coil, 0.15 mH/0.28 Ohm
  • 0.7 mm air core coil, 2.2 mH/1.3 Ohm
  • 0.7 mm air core coil, 22 mH/5.61 Ohm
  • 1.0 mm air core coil, 0.47 mH/0.32 Ohm
  • Mundorf H core coil H71, 3.9 mH/0.5 0hm
  • Mundorf H core coil H71, 6.8 mH/0.7 0hm
  • Metal-oxide resistor, 10W 6.8 Ohm (blue-grey-gold)
  • Metal-oxide resistor, 10W 8.2 Ohm (grey-red-gold)

Kit without cabinet, price per speaker   - not available

Kit with high-end crossover

The kit with high-end crossover contains ClarityCap PWA capacitors in the filter for the fullrange loudspeaker. In addition Mundorf baked varnish coils are used.

Kit with high-end-crossover without cabinet, price per speaker   EUR 522,00 excl. VAT: € 438.66 / $ 469.36

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).

Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 7,60 excl. VAT: € 6.39 / $ 6.83

universal PCB

If you prefer to mount the crossover components on a 240 x 165 mm universal PCB instead on wood:
Universal PCB RA240, order no.. str-RA240, price per unit:   EUR 8,60 excl. VAT: € 7.23 / $ 7.73
We recommend one board per kit (two boards for a speaker pair)

Visaton DIY kit

If you prefer to get an assembled crossover we recommend the Visaton kit.

Kit with Visaton crossover without cabinet, price per speaker   EUR 583,90 excl. VAT: € 490.67 / $ 525.02

Home   Hobby HiFi Overview