WaveMon 182   Shelf speaker as in Hobby Hifi 4/2013

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 87 dB
  • size (HxWxD): 520 x 230 x 230 mm
  • frequency range (-8dB): 37 - 34000 Hz
  • crossover frequency(s): 1350 Hz
  • speaker type: bass reflex

An excerpt from the Hobby HiFi review

An excerpt from the Hobby HiFi review

Our kit consists of

  • Wavecor silk dome tweeter TW030WA09, 4 Ohm
  • Wavecor Mid/Woofer WF182BD03, die cast, 4 Ohm
  • 2x Bass reflex tube HP50, 50x143mm, black
  • 3x Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
  • Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK31, gold plated (one pair, red and black)
  • 2m Speaker cable 2x2.5 mm2, transparent
  • 1,25x Pan screws 4x20 black, cross recess, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • Mundorf MCAP EVO 3.3 μF / 450 V
  • Mundorf MCAP EVO 8.2 μF / 450 V
  • Mundorf MKP capacitor 4.7 μF / 400 V
  • 2x Mundorf, electrolytic capacitor, etched, 22 μF/100 Vdc
  • Mundorf, electrolytic capacitor, etched, 220 μF/63 Vdc
  • Mundorf air core coil L50, 1.5 mH/1.85 0hm
  • Mundorf air core coil L140, 1.8 mH/0.43 Ohm
  • 0.7 mm air core coil, 0.22 mH/0.34 Ohm
  • 0.7 mm air core coil, 12 mH/3.9 Ohm
  • Metal-oxide resistor, 5W 1.8 Ohm (brown-grey-gold)
  • 2x Metal-oxide resistor, 5W 2.2 Ohm (red-red-gold)
  • Metal-oxide resistor, 5W 6.8 Ohm (blue-grey-gold)
  • Metal-oxide resistor, 5W 10 Ohm (brown-black-black)

Kit without cabinet, price per speaker   EUR 500,00 excl. VAT: € 420.17 / $ 487.39

Kit with high-end crossover

Kit with high-end-crossover without cabinet, price per speaker   EUR 540,00 excl. VAT: € 453.78 / $ 526.39

Kit with high-end crossover no. 2

Kit with high-end-crossover without cabinet, price per speaker   EUR 868,00 excl. VAT: € 729.41 / $ 846.12

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 10,00 excl. VAT: € 8.40 / $ 9.75

universal PCB

If you prefer to mount the crossover components on a 240 x 165 mm universal PCB instead on wood:
Universal PCB RA240, order no.. str-RA240, price per unit:   EUR 8,60 excl. VAT: € 7.23 / $ 8.38
We recommend one board per kit (two boards for a speaker pair)

If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. str-RA160, price per unit:   EUR 5,90 excl. VAT: € 4.96 / $ 5.75
We recommend one board per kit (two boards for a speaker pair)


Home   Hobby HiFi Overview