Jantzen Audio


 

Tweeter


 

Woofer

Jantzen Audio JA-5006
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,7 L volume
from 93/59 Hz (-3dB/-8dB)

recommended cabinet 2:
15 L volume bass reflex cabinet
with HP50 reflex tube, 12 cm long.
from 42/36 Hz (-3dB/-8dB).

Jantzen Audio JA-5006  

order no. Ja-5006-06

- not available

13 cm bass driver with polypropylene cone.

  • power handling (continuous/programme) = 100/150 W
  • frequency range = 50-2500 Hz
  • resonance frequency fs = 62 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 5,8 N/A
  • effective piston radiating area Sd = 85 cm2
  • effective mechanical mass incl. air load mms = 12 g
  • equivalent volume of compliance Vas = 5,5 l
  • total Q factor Qts = 0,53 (Qms=2,34, Qes=0,68)
  • voice coil diameter = 75 mm
  • mounting diameter d = 125 mm
  • overall diameter d = 145 mm
  • mounting depth (not countersunk) t = 63 mm
PDF data sheet

Jantzen Audio JA-6006
open a bigger photo

recommended cabinet 1:
closed cabinet with 10,9 L volume
from 71/45 Hz (-3dB/-8dB)

recommended cabinet 2:
43 L volume bass reflex cabinet
with HP70 reflex tube, 13 cm long.
from 32/28 Hz (-3dB/-8dB).

Jantzen Audio JA-6006  

order no. Ja-6006-06

- not available

16 cm bass driver with polypropylene cone.

  • power handling (continuous/programme) = 100/150 W
  • frequency range = 40-2000 Hz
  • resonance frequency fs = 50 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 85,6 dB (2,83V; 1m)
  • DC resistance Re = 5,04 Ohm
  • force factor BL = 5,72 N/A
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 15 g
  • equivalent volume of compliance Vas = 13,3 l
  • total Q factor Qts = 0,55 (Qms=2,31, Qes=0,73)
  • voice coil diameter = 75 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 175 mm
  • mounting depth (not countersunk) t = 72 mm
PDF data sheet

Jantzen Audio Ja-8008 HMQ
open a bigger photo

recommended cabinet 1:
closed cabinet with 4,1 L volume
from 146/92 Hz (-3dB/-8dB)

recommended cabinet 2:
10 L volume bass reflex cabinet
with HP70 reflex tube, 15 cm long.
from 87/65 Hz (-3dB/-8dB).

Jantzen Audio Ja-8008 HMQ  

order no. Ja-8008-08-hmq

EUR 271,00 excl. VAT: € 227.73 / $ 245.95

20 cm bass driver with paper cone.

  • frequency range = 40-5000 Hz
  • resonance frequency fs = 46 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 6,07 Ohm
  • force factor BL = 11,1 N/A
  • effective piston radiating area Sd = 219 cm2
  • effective mechanical mass incl. air load mms = 18 g
  • equivalent volume of compliance Vas = 44,3 l
  • total Q factor Qts = 0,25 (Qms=10, Qes=0,26)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 186 mm
  • overall diameter d = 221 mm
  • mounting depth (not countersunk) t = 88 mm
PDF data sheet


 

no longer sold

Jantzen Audio JDT-1024 Diamond Tweeter  

order no. Ja-jdt-1024

- not available

25 mm dome tweeter with diamond dome.

  • frequency range = 1500-45000 Hz
  • resonance frequency fs = 1030 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 6,5 Ohm
  • total Q factor Qts = 0,67 (Qms=4,02, Qes=0,8)
  • voice coil diameter = 25 mm
PDF data sheet

Jantzen Audio JA-2806  

order no. Ja-2806-06

- not available

28 mm dome tweeter with fabric dome. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.

  • frequency range = 2000-20000 Hz
  • resonance frequency fs = 700 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • voice coil diameter = 28 mm
  • mounting diameter d = 86 mm
  • overall diameter d = 111 mm
  • mounting depth (not countersunk) t = 42 mm
PDF data sheet

Jantzen Audio JA-6012
open a bigger photo

recommended cabinet 1:
closed cabinet with 12,1 L volume
from 74/47 Hz (-3dB/-8dB)

recommended cabinet 2:
47 L volume bass reflex cabinet
with HP70 reflex tube, 10 cm long.
from 33/29 Hz (-3dB/-8dB).

Jantzen Audio JA-6012  

order no. Ja-6012-12

- not available

16 cm bass driver with polypropylene cone.

  • power handling (continuous/programme) = 100/150 W
  • frequency range = 40-5000 Hz
  • resonance frequency fs = 54 Hz
  • impedance R = 12 Ohm
  • sound pressure level SPL = 85,9 dB (2,83V; 1m)
  • DC resistance Re = 10,3 Ohm
  • force factor BL = 7,55 N/A
  • effective piston radiating area Sd = 119 cm2
  • effective mechanical mass incl. air load mms = 13,4 g
  • equivalent volume of compliance Vas = 12,8 l
  • total Q factor Qts = 0,59 (Qms=2,08, Qes=0,83)
  • voice coil diameter = 75 mm
  • mounting diameter d = 140 mm
  • overall diameter d = 175 mm
  • mounting depth (not countersunk) t = 85 mm
PDF data sheet


recommended cabinet 1:
closed cabinet with 4,7 L volume
from 152/96 Hz (-3dB/-8dB)

recommended cabinet 2:
11,1 L volume bass reflex cabinet
with HP70 reflex tube, 12 cm long.
from 92/69 Hz (-3dB/-8dB).

Jantzen Audio Ja-8008 HES  

order no. not-available

- not available

20 cm bass driver with paper cone.

  • frequency range = 40-5000 Hz
  • resonance frequency fs = 46 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 9,5 N/A
  • effective piston radiating area Sd = 222 cm2
  • effective mechanical mass incl. air load mms = 15 g
  • equivalent volume of compliance Vas = 56 l
  • total Q factor Qts = 0,25 (Qms=1,6, Qes=0,29)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 186 mm
  • overall diameter d = 221 mm
  • mounting depth (not countersunk) t = 88 mm

The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright (c) Daniel Gattig, 2023; All rights reserved. - errors and omissions excepted