Markaudio

Markaudio develops full range drivers for commercial and high end customers in Asia, Europe and North America.

With them, the sound comes from one voice, the sound image does not disintegrate into a high, medium and low frequency source. Crossovers with coils and capacitors absorb energy and release it later on, thus disturbing the sound image. This is why Mark Audio loudspeakers are designed for crossover-free control.

Simply determine the suitable housing with the aid of the volume calculator (the required volume is given for each speaker, see below on the left hand side).

To our building proposals with Markaudio drivers.


 

Full Range

Markaudio Alpair 5 A Generation 2 Gold
open a bigger photo

recommended cabinet 1:
closed cabinet with 0,77 L volume
from 157/99 Hz (-3dB/-8dB)

recommended cabinet 2:
3,1 L volume bass reflex cabinet
with HP35 reflex tube, 10 cm long.
from 72/61 Hz (-3dB/-8dB).

Markaudio Alpair 5 A Generation 2 Gold  

order no. ma-alpair5a-g2-gold

EUR 109,00 excl. VAT: € 91.60 / $ 98.92

9 cm full range driver with metal cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 20 W
  • frequency range = 80-24000 Hz
  • resonance frequency fs = 101 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 84,6 dB (2,83V; 1m)
  • DC resistance Re = 3,6 Ohm
  • force factor BL = 2,5 N/A
  • voice coil inductance L = 0,039 mH
  • effective piston radiating area Sd = 28,3 cm2
  • effective mechanical mass incl. air load mms = 2,1 g
  • equivalent volume of compliance Vas = 1,3 l
  • total Q factor Qts = 0,5 (Qms=1,49, Qes=0,76)
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 78 mm
  • overall diameter d = 100 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio Alpair 5 A Generation 2 Grey
open a bigger photo

recommended cabinet 1:
closed cabinet with 0,77 L volume
from 157/99 Hz (-3dB/-8dB)

recommended cabinet 2:
3,1 L volume bass reflex cabinet
with HP35 reflex tube, 10 cm long.
from 72/61 Hz (-3dB/-8dB).

Markaudio Alpair 5 A Generation 2 Grey  

order no. ma-alpair5a-g2-grey

EUR 109,00 excl. VAT: € 91.60 / $ 98.92

9 cm full range driver with metal cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 20 W
  • frequency range = 80-24000 Hz
  • resonance frequency fs = 101 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 84,6 dB (2,83V; 1m)
  • DC resistance Re = 3,6 Ohm
  • force factor BL = 2,5 N/A
  • voice coil inductance L = 0,039 mH
  • effective piston radiating area Sd = 28,3 cm2
  • effective mechanical mass incl. air load mms = 2,1 g
  • equivalent volume of compliance Vas = 1,3 l
  • total Q factor Qts = 0,5 (Qms=1,49, Qes=0,76)
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 78 mm
  • overall diameter d = 100 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio Alpair 6P A paper cone Generation 2
open a bigger photo

Markaudio Alpair 6P A paper cone Generation 2
open a bigger photo

recommended cabinet 1:
closed cabinet with 1,4 L volume
from 133/84 Hz (-3dB/-8dB)

recommended cabinet 2:
5,4 L volume bass reflex cabinet
with HP35 reflex tube, 8 cm long.
from 63/52 Hz (-3dB/-8dB).

Markaudio Alpair 6P A paper cone Generation 2  

order no. ma-alpair6pa-g2

EUR 109,00 excl. VAT: € 91.60 / $ 98.92

10 cm full range driver with paper cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 15 W
  • frequency range = 100-22000 Hz
  • resonance frequency fs = 74 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 3,8 Ohm
  • force factor BL = 2,67 N/A
  • voice coil inductance L = 0,0069 mH
  • effective piston radiating area Sd = 36,3 cm2
  • effective mechanical mass incl. air load mms = 2,32 g
  • equivalent volume of compliance Vas = 3,6 l
  • total Q factor Qts = 0,43 (Qms=1,78, Qes=0,57)
  • voice coil diameter = 18 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 100 mm
  • overall diameter d = 114 mm
  • mounting depth (not countersunk) t = 51,6 mm
PDF data sheet

journal Hobby HiFi
Fazit: Der Alpair 6P fasziniert mit ausgewogenem, breitbandigen und weitestgehend störungsfreien Klang, nebst für die geringe Größe überragender Tieftonqualität und Pegelfestigkeit.

show kits to this chassis hide kits

Markaudio Alpair 6M A metal cone Generation 2
open a bigger photo

Markaudio Alpair 6M A metal cone Generation 2
open a bigger photo

recommended cabinet 1:
closed cabinet with 1,3 L volume
from 127/80 Hz (-3dB/-8dB)

recommended cabinet 2:
4,9 L volume bass reflex cabinet
with HP35 reflex tube, 10 cm long.
from 63/51 Hz (-3dB/-8dB).

Markaudio Alpair 6M A metal cone Generation 2  

order no. ma-alpair6ma-g2

- not available

10 cm full range driver with metal cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 15 W
  • frequency range = 100-22000 Hz
  • resonance frequency fs = 63 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85,4 dB (2,83V; 1m)
  • DC resistance Re = 3,6 Ohm
  • force factor BL = 2,81 N/A
  • voice coil inductance L = 0,0013 mH
  • effective piston radiating area Sd = 36,3 cm2
  • effective mechanical mass incl. air load mms = 2,57 g
  • equivalent volume of compliance Vas = 4,8 l
  • total Q factor Qts = 0,39 (Qms=2,76, Qes=0,45)
  • voice coil diameter = 18 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 100 mm
  • overall diameter d = 114 mm
  • mounting depth (not countersunk) t = 51,6 mm
PDF data sheet

journal Hobby HiFi
Fazit: Der Alpair 6M ist für besonders kompakte Desktop-Monitore und Nahfeld-Abhören ideal. Er kombiniert hervorragende Klangqualität mit für die Größe erstaunlicher Pegelfestigkeit.

show kits to this chassis hide kits

Markaudio Alpair 7 A Generation 3 Gold
open a bigger photo

Markaudio Alpair 7 A Generation 3 Gold
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,3 L volume
from 104/66 Hz (-3dB/-8dB)

recommended cabinet 2:
13,3 L volume bass reflex cabinet
with HP50 reflex tube, 11 cm long.
from 47/41 Hz (-3dB/-8dB).

Markaudio Alpair 7 A Generation 3 Gold  

order no. ma-alpair7a-g3-gold

- not available

12 cm full range driver with metal cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 20 W
  • frequency range = 55-28000 Hz
  • resonance frequency fs = 70,9 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 85,8 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 3,83 N/A
  • voice coil inductance L = 0,021 mH
  • effective piston radiating area Sd = 50,2 cm2
  • effective mechanical mass incl. air load mms = 3,95 g
  • equivalent volume of compliance Vas = 4,58 l
  • total Q factor Qts = 0,54 (Qms=3,07, Qes=0,65)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 4,2 mm
  • mounting diameter d = 103 mm
  • overall diameter d = 135 mm
  • mounting depth (not countersunk) t = 58,6 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio Alpair 7 A Generation 3 Grey
open a bigger photo

Markaudio Alpair 7 A Generation 3 Grey
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,3 L volume
from 104/66 Hz (-3dB/-8dB)

recommended cabinet 2:
13,3 L volume bass reflex cabinet
with HP50 reflex tube, 11 cm long.
from 47/41 Hz (-3dB/-8dB).

Markaudio Alpair 7 A Generation 3 Grey  

order no. ma-alpair7a-g3-grey

- not available

12 cm full range driver with metal cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 20 W
  • frequency range = 55-28000 Hz
  • resonance frequency fs = 70,9 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 85,8 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 3,83 N/A
  • voice coil inductance L = 0,021 mH
  • effective piston radiating area Sd = 50,2 cm2
  • effective mechanical mass incl. air load mms = 3,95 g
  • equivalent volume of compliance Vas = 4,58 l
  • total Q factor Qts = 0,54 (Qms=3,07, Qes=0,65)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 4,2 mm
  • mounting diameter d = 103 mm
  • overall diameter d = 135 mm
  • mounting depth (not countersunk) t = 58,6 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio Alpair 7 P Generation 1
open a bigger photo

Markaudio Alpair 7 P Generation 1
open a bigger photo

recommended cabinet 1:
closed cabinet with 2,9 L volume
from 119/75 Hz (-3dB/-8dB)

recommended cabinet 2:
11,9 L volume bass reflex cabinet
with HP50 reflex tube, 9 cm long.
from 55/46 Hz (-3dB/-8dB).

Markaudio Alpair 7 P Generation 1  

order no. ma-alpair7p-g1-grey

EUR 169,00 excl. VAT: € 142.02 / $ 153.38

12 cm full range driver with paper cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 20 W
  • frequency range = 60-32000 Hz
  • resonance frequency fs = 73,4 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,5 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 3,525 N/A
  • voice coil inductance L = 0,0168 mH
  • effective piston radiating area Sd = 50,3 cm2
  • effective mechanical mass incl. air load mms = 3,02 g
  • equivalent volume of compliance Vas = 5,6 l
  • total Q factor Qts = 0,5 (Qms=2,824, Qes=0,605)
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 103 mm
  • overall diameter d = 135 mm
  • mounting depth (not countersunk) t = 75 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio Alpair 10M A Generation 3 Gold
open a bigger photo

recommended cabinet 1:
closed cabinet with 4,2 L volume
from 96/60 Hz (-3dB/-8dB)

recommended cabinet 2:
13,1 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 52/40 Hz (-3dB/-8dB).

Markaudio Alpair 10M A Generation 3 Gold  

order no. ma-alpair10ma-g3-gold

- not available

15 cm full range driver with metal cone. The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 35 W
  • frequency range = 40-21000 Hz
  • resonance frequency fs = 38,3 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 7,2 Ohm
  • force factor BL = 5,77 N/A
  • voice coil inductance L = 0,07 mH
  • effective piston radiating area Sd = 88,25 cm2
  • effective mechanical mass incl. air load mms = 7,27 g
  • equivalent volume of compliance Vas = 26,32 l
  • total Q factor Qts = 0,32 (Qms=1,93, Qes=0,378)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 7,5 mm
  • mounting diameter d = 139 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio Alpair 10M A Generation 3 Grey
open a bigger photo

recommended cabinet 1:
closed cabinet with 4,2 L volume
from 96/60 Hz (-3dB/-8dB)

recommended cabinet 2:
13,1 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 52/40 Hz (-3dB/-8dB).

Markaudio Alpair 10M A Generation 3 Grey  

order no. ma-alpair10ma-g3-grey

- not available

15 cm full range driver with metal cone. The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 35 W
  • frequency range = 40-21000 Hz
  • resonance frequency fs = 38,3 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 7,2 Ohm
  • force factor BL = 5,77 N/A
  • voice coil inductance L = 0,07 mH
  • effective piston radiating area Sd = 88,25 cm2
  • effective mechanical mass incl. air load mms = 7,27 g
  • equivalent volume of compliance Vas = 26,32 l
  • total Q factor Qts = 0,32 (Qms=1,93, Qes=0,378)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 7,5 mm
  • mounting diameter d = 139 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio Alpair 10P A Generation 1
open a bigger photo

recommended cabinet 1:
closed cabinet with 5,1 L volume
from 103/65 Hz (-3dB/-8dB)

recommended cabinet 2:
17 L volume bass reflex cabinet
with HP70 reflex tube, 19 cm long.
from 55/43 Hz (-3dB/-8dB).

Markaudio Alpair 10P A Generation 1  

order no. ma-alpair10pa-g1

- not available

15 cm full range driver with paper cone. The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 35 W
  • frequency range = 45-21000 Hz
  • resonance frequency fs = 42,4 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89,6 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 4,74 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 88,25 cm2
  • effective mechanical mass incl. air load mms = 5,19 g
  • equivalent volume of compliance Vas = 29,99 l
  • total Q factor Qts = 0,33 (Qms=2,425, Qes=0,382)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 139 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio Alpair 12 P Generation 2
open a bigger photo

recommended cabinet 1:
closed cabinet with 5,1 L volume
from 119/75 Hz (-3dB/-8dB)

recommended cabinet 2:
13,9 L volume bass reflex cabinet
with HP70 reflex tube, 16 cm long.
from 68/52 Hz (-3dB/-8dB).

Markaudio Alpair 12 P Generation 2  

order no. ma-alpair12p-g2-grey

- not available

19 cm full range driver with paper cone. The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 30 W
  • frequency range = 40-21000 Hz
  • resonance frequency fs = 42 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91,7 dB (2,83V; 1m)
  • DC resistance Re = 7 Ohm
  • force factor BL = 7,54 N/A
  • voice coil inductance L = 0,054 mH
  • effective piston radiating area Sd = 147,4 cm2
  • effective mechanical mass incl. air load mms = 10,2 g
  • equivalent volume of compliance Vas = 43 l
  • total Q factor Qts = 0,28 (Qms=1,98, Qes=0,33)
  • maximum peak linear excursion vibration xlin = +/- 5,4 mm
  • mounting diameter d = 168 mm
  • overall diameter d = 207 mm
  • mounting depth (not countersunk) t = 86 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio Alpair 12 PW Generation 1
open a bigger photo

recommended cabinet 1:
closed cabinet with 11,7 L volume
from 79/50 Hz (-3dB/-8dB)

recommended cabinet 2:
43 L volume bass reflex cabinet
with HP70 reflex tube, 10 cm long.
from 40/32 Hz (-3dB/-8dB).

Markaudio Alpair 12 PW Generation 1  

order no. ma-alpair12pw-g1-grey

- not available

19 cm bass-midrange driver with paper cone. The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 40 W
  • frequency range = 30-18000 Hz
  • resonance frequency fs = 38,4 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,6 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 5,31 N/A
  • voice coil inductance L = 0,049 mH
  • effective piston radiating area Sd = 147,4 cm2
  • effective mechanical mass incl. air load mms = 11,7 g
  • equivalent volume of compliance Vas = 45,3 l
  • total Q factor Qts = 0,39 (Qms=1,44, Qes=0,54)
  • maximum peak linear excursion vibration xlin = +/- 8,5 mm
  • mounting diameter d = 168 mm
  • overall diameter d = 207 mm
  • mounting depth (not countersunk) t = 96,3 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio CHN-50
open a bigger photo

recommended cabinet 1:
closed cabinet with 0,96 L volume
from 158/100 Hz (-3dB/-8dB)

recommended cabinet 2:
3,8 L volume bass reflex cabinet
with HP35 reflex tube, 8 cm long.
from 70/62 Hz (-3dB/-8dB).

Markaudio CHN-50  

order no. ma-chn50-g1

EUR 49,00 excl. VAT: € 41.18 / $ 44.47

9 cm full range driver with metal cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 7 W
  • frequency range = 120-30000 Hz
  • resonance frequency fs = 113,2 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85,74 dB (2,83V; 1m)
  • DC resistance Re = 3,4 Ohm
  • force factor BL = 2,687 N/A
  • voice coil inductance L = 0,06 mH
  • effective piston radiating area Sd = 28 cm2
  • effective mechanical mass incl. air load mms = 2,0871 g
  • equivalent volume of compliance Vas = 1,0965 l
  • total Q factor Qts = 0,55 (Qms=2,8318, Qes=0,6865)
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 70 mm
  • overall diameter d = 103 mm
  • mounting depth (not countersunk) t = 45,6 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio CHR-70 A Generation 3 Champangne
open a bigger photo

Markaudio CHR-70 A Generation 3 Champangne
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,7 L volume
from 96/61 Hz (-3dB/-8dB)

recommended cabinet 2:
15 L volume bass reflex cabinet
with HP50 reflex tube, 11 cm long.
from 43/37 Hz (-3dB/-8dB).

Markaudio CHR-70 A Generation 3 Champangne  

order no. ma-chr70a-g3-cham

EUR 69,00 excl. VAT: € 57.98 / $ 62.62

11 cm full range driver with metal cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 20 W
  • frequency range = 60-30000 Hz
  • resonance frequency fs = 65,4 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,4 dB (2,83V; 1m)
  • DC resistance Re = 7,2 Ohm
  • force factor BL = 4,2 N/A
  • voice coil inductance L = 0,032 mH
  • effective piston radiating area Sd = 50,2 cm2
  • effective mechanical mass incl. air load mms = 4,1 g
  • equivalent volume of compliance Vas = 5,17 l
  • total Q factor Qts = 0,55 (Qms=2,66, Qes=0,69)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 4,3 mm
  • mounting diameter d = 102 mm
  • overall diameter d = 124 mm
  • mounting depth (not countersunk) t = 56 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio CHR-70 A Generation 3 Brushed Metal
open a bigger photo

Markaudio CHR-70 A Generation 3 Brushed Metal
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,7 L volume
from 96/61 Hz (-3dB/-8dB)

recommended cabinet 2:
15 L volume bass reflex cabinet
with HP50 reflex tube, 11 cm long.
from 43/37 Hz (-3dB/-8dB).

Markaudio CHR-70 A Generation 3 Brushed Metal  

order no. ma-chr70a-g3-brme

EUR 69,00 excl. VAT: € 57.98 / $ 62.62

11 cm full range driver with metal cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 20 W
  • frequency range = 60-30000 Hz
  • resonance frequency fs = 65,4 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,4 dB (2,83V; 1m)
  • DC resistance Re = 7,2 Ohm
  • force factor BL = 4,2 N/A
  • voice coil inductance L = 0,032 mH
  • effective piston radiating area Sd = 50,2 cm2
  • effective mechanical mass incl. air load mms = 4,1 g
  • equivalent volume of compliance Vas = 5,17 l
  • total Q factor Qts = 0,55 (Qms=2,66, Qes=0,69)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 4,3 mm
  • mounting diameter d = 102 mm
  • overall diameter d = 124 mm
  • mounting depth (not countersunk) t = 56 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio Pluvia Seven Generation 1 Vintage Gold
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,7 L volume
from 102/64 Hz (-3dB/-8dB)

recommended cabinet 2:
15 L volume bass reflex cabinet
with HP50 reflex tube, 10 cm long.
from 46/40 Hz (-3dB/-8dB).

Markaudio Pluvia Seven Generation 1 Vintage Gold  

order no. ma-pluvia7-g1-vg

- not available

11 cm full range driver with metal cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 22 W
  • frequency range = 60-30000 Hz
  • resonance frequency fs = 68 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,8 dB (2,83V; 1m)
  • DC resistance Re = 7,2 Ohm
  • force factor BL = 3,97 N/A
  • voice coil inductance L = 0,035 mH
  • effective piston radiating area Sd = 50 cm2
  • effective mechanical mass incl. air load mms = 3,56 g
  • equivalent volume of compliance Vas = 5,5 l
  • total Q factor Qts = 0,54 (Qms=2,39, Qes=0,695)
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 100 mm
  • overall diameter d = 122,3 mm
  • mounting depth (not countersunk) t = 58 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio Pluvia Seven Generation 1 Soft Chrome
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,7 L volume
from 102/64 Hz (-3dB/-8dB)

recommended cabinet 2:
15 L volume bass reflex cabinet
with HP50 reflex tube, 10 cm long.
from 46/40 Hz (-3dB/-8dB).

Markaudio Pluvia Seven Generation 1 Soft Chrome  

order no. ma-pluvia7-g1-sc

EUR 89,00 excl. VAT: € 74.79 / $ 80.77

11 cm full range driver with metal cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 22 W
  • frequency range = 60-30000 Hz
  • resonance frequency fs = 68 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,8 dB (2,83V; 1m)
  • DC resistance Re = 7,2 Ohm
  • force factor BL = 3,97 N/A
  • voice coil inductance L = 0,035 mH
  • effective piston radiating area Sd = 50 cm2
  • effective mechanical mass incl. air load mms = 3,56 g
  • equivalent volume of compliance Vas = 5,5 l
  • total Q factor Qts = 0,54 (Qms=2,39, Qes=0,695)
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 100 mm
  • overall diameter d = 122,3 mm
  • mounting depth (not countersunk) t = 58 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio Pluvia Eleven Generation 1 Vintage Gold
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,2 L volume
from 107/68 Hz (-3dB/-8dB)

recommended cabinet 2:
9 L volume bass reflex cabinet
with HP50 reflex tube, 17 cm long.
from 60/46 Hz (-3dB/-8dB).

Markaudio Pluvia Eleven Generation 1 Vintage Gold  

order no. ma-pluvia11-g1-vg

EUR 129,00 excl. VAT: € 108.40 / $ 117.08

16 cm full range driver with metal cone. The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 45 W
  • frequency range = 40-21000 Hz
  • resonance frequency fs = 39 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 6,55 N/A
  • voice coil inductance L = 0,068 mH
  • effective piston radiating area Sd = 109,4 cm2
  • effective mechanical mass incl. air load mms = 11,358 g
  • equivalent volume of compliance Vas = 24,75 l
  • total Q factor Qts = 0,29 (Qms=1,797, Qes=0,351)
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 143,6 mm
  • overall diameter d = 172 mm
  • mounting depth (not countersunk) t = 80,2 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio Pluvia Eleven Generation 1 Soft Chrome
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,2 L volume
from 107/68 Hz (-3dB/-8dB)

recommended cabinet 2:
9 L volume bass reflex cabinet
with HP50 reflex tube, 17 cm long.
from 60/46 Hz (-3dB/-8dB).

Markaudio Pluvia Eleven Generation 1 Soft Chrome  

order no. ma-pluvia11-g1-sc

EUR 119,00 excl. VAT: € 100.00 / $ 108.00

16 cm full range driver with metal cone. The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 45 W
  • frequency range = 40-21000 Hz
  • resonance frequency fs = 39 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 6,55 N/A
  • voice coil inductance L = 0,068 mH
  • effective piston radiating area Sd = 109,4 cm2
  • effective mechanical mass incl. air load mms = 11,358 g
  • equivalent volume of compliance Vas = 24,75 l
  • total Q factor Qts = 0,29 (Qms=1,797, Qes=0,351)
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 143,6 mm
  • overall diameter d = 172 mm
  • mounting depth (not countersunk) t = 80,2 mm
PDF data sheet

show kits to this chassis hide kits


 

no longer sold

Markaudio Alpair 6M metal cone Generation 2
open a bigger photo

Markaudio Alpair 6M metal cone Generation 2
open a bigger photo

recommended cabinet 1:
closed cabinet with 1,3 L volume
from 127/80 Hz (-3dB/-8dB)

recommended cabinet 2:
4,9 L volume bass reflex cabinet
with HP35 reflex tube, 10 cm long.
from 63/51 Hz (-3dB/-8dB).

Markaudio Alpair 6M metal cone Generation 2  

order no. ma-alpair6m-g2

- not available

10 cm full range driver with metal cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 15 W
  • frequency range = 100-22000 Hz
  • resonance frequency fs = 63 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85,4 dB (2,83V; 1m)
  • DC resistance Re = 3,6 Ohm
  • force factor BL = 2,81 N/A
  • voice coil inductance L = 0,0013 mH
  • effective piston radiating area Sd = 36,3 cm2
  • effective mechanical mass incl. air load mms = 2,57 g
  • equivalent volume of compliance Vas = 4,8 l
  • total Q factor Qts = 0,39 (Qms=2,76, Qes=0,45)
  • voice coil diameter = 18 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 100 mm
  • overall diameter d = 114 mm
  • mounting depth (not countersunk) t = 51,6 mm
PDF data sheet

journal Hobby HiFi
Fazit: Der Alpair 6M ist für besonders kompakte Desktop-Monitore und Nahfeld-Abhören ideal. Er kombiniert hervorragende Klangqualität mit für die Größe erstaunlicher Pegelfestigkeit.

show kits to this chassis hide kits

Markaudio Alpair 7 Generation 3 gold
open a bigger photo

Markaudio Alpair 7 Generation 3 gold
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,3 L volume
from 104/66 Hz (-3dB/-8dB)

recommended cabinet 2:
13,3 L volume bass reflex cabinet
with HP50 reflex tube, 11 cm long.
from 47/41 Hz (-3dB/-8dB).

Markaudio Alpair 7 Generation 3 gold  

order no. ma-alpair7-g3-gold

- not available

12 cm full range driver with metal cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 20 W
  • frequency range = 55-28000 Hz
  • resonance frequency fs = 70,9 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 85,8 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 3,83 N/A
  • voice coil inductance L = 0,021 mH
  • effective piston radiating area Sd = 50,2 cm2
  • effective mechanical mass incl. air load mms = 3,95 g
  • equivalent volume of compliance Vas = 4,58 l
  • total Q factor Qts = 0,54 (Qms=3,07, Qes=0,65)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 4,2 mm
  • mounting diameter d = 103 mm
  • overall diameter d = 135 mm
  • mounting depth (not countersunk) t = 58,6 mm
PDF data sheet

show kits to this chassis hide kits

Markaudio CHR-70 Generation 3 Brushed Metal
open a bigger photo

Markaudio CHR-70 Generation 3 Brushed Metal
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,7 L volume
from 96/61 Hz (-3dB/-8dB)

recommended cabinet 2:
15 L volume bass reflex cabinet
with HP50 reflex tube, 11 cm long.
from 43/37 Hz (-3dB/-8dB).

Markaudio CHR-70 Generation 3 Brushed Metal  

order no. ma-chr70-3-brme

- not available

11 cm full range driver with metal cone. A pair of speakers is delivered (the price is for one pair). The rubber surround is invers. The speaker has soldering lugs / faston terminals.

  • power handling (continuous/programme) = 20 W
  • frequency range = 60-30000 Hz
  • resonance frequency fs = 65,4 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,4 dB (2,83V; 1m)
  • DC resistance Re = 7,2 Ohm
  • force factor BL = 4,2 N/A
  • voice coil inductance L = 0,032 mH
  • effective piston radiating area Sd = 50,2 cm2
  • effective mechanical mass incl. air load mms = 4,1 g
  • equivalent volume of compliance Vas = 5,17 l
  • total Q factor Qts = 0,55 (Qms=2,66, Qes=0,69)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 4,3 mm
  • mounting diameter d = 102 mm
  • overall diameter d = 124 mm
  • mounting depth (not countersunk) t = 56 mm
PDF data sheet

show kits to this chassis hide kits

The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright (c) Daniel Gattig, 2023; All rights reserved. - errors and omissions excepted