Samara is a compact loudspeaker with a full range driver.
Samara is a bass-reflex cabinet loudspeaker with drivers of wavecor .
The kit is delivered with a Wavecor WF120CU07 full range driver
The loudspeaker has been developed by Dennis Frank and Daniel Gattig.
The crossover consists of two RCL circuits in series to the fullrange driver.
The frequency response of this speaker is nearly linear.
The decay spectrum as shown in the waterfall diagram is exemplary, free of any disturbing resonance.
At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 0,5% above 800 Hz and doesn't exceed 1,5% at 95 dB at 1 m between 300 and 15000 Hz.
the crossover components (right),
to be mounted on a small wooden board.
Kit without cabinet, price per speaker EUR 203,00 excl. VAT: € 170.59 / $ 184.24
The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the fullrange driver are of type polypropylen (MKP) Clarity-Cap ESA 250 V.
Kit with high-end-crossover without cabinet, price per speaker EUR 234,00 excl. VAT: € 196.64 / $ 212.37
If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).
If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 150x115 mm, tin plated, price per unit: EUR 4,70 excl. VAT: € 3.95 / $ 4.27
We recommend one board per kit (2 boards per speaker pair)
Measurements on this speaker
Pictures of this loudspeaker