Tweeter   Coaxial speaker   Mids   Woofer   SEAS Extreme   Passive Radiators   Full Range   no longer sold  

Seas Prestige

The moving coil loudspeaker is by far the dominant electroacoustic transducer. SEAS design and produce from high end quality parts, using complicated procedures and incorporating a highly skilled workforce to satisfy even the most critical listeners.

To our building proposals with Seas Prestige drivers.


 

Tweeter

Seas Prestige 19TAF/G (H0414)

Seas Prestige 19TAF/G (H0414)  

order no. seas-H0414-08

on request

19,5 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 4000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 2,6 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 4 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 66,5 mm
  • overall diameter d = 93,8 mm
  • mounting depth (not countersunk) t = 18 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 19TAF/D/G (H0532)

Seas Prestige 19TAF/D/G (H0532)  

order no. seas-H0532-08

EUR 59,00 excl. VAT: € 49.58 / $ 54.04

19,5 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 4000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 2,6 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 4 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 66,5 mm
  • overall diameter d = 93,8 mm
  • mounting depth (not countersunk) t = 28 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 19TAF/D (H0561)

Seas Prestige 19TAF/D (H0561)  

order no. seas-H0561-08

on request

19,5 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 4000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 2,6 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 4 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 66,5 mm
  • overall diameter d = 93,8 mm
  • mounting depth (not countersunk) t = 18 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 19TFF1 (H0737)

Seas Prestige 19TFF1 (H0737)  

order no. seas-H0737-08

EUR 39,90 excl. VAT: € 33.53 / $ 36.55

19,5 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 4000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 2,6 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 4 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 66,5 mm
  • overall diameter d = 93,8 mm
  • mounting depth (not countersunk) t = 18 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 22TAF/G (H1283)
open a bigger photo

Seas Prestige 22TAF/G (H1283)  

order no. seas-H1283-06

EUR 64,00 excl. VAT: € 53.78 / $ 58.62

19,5 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 80/180 W
  • frequency range = 2500-30000 Hz
  • resonance frequency fs = 1100 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 3,3 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 97,7 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 22TFF (1280)
open a bigger photo

Seas Prestige 22TFF (1280)  

order no. seas-H1280

EUR 56,90 excl. VAT: € 47.82 / $ 52.12

19,5 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/180 W
  • frequency range = 2500-20000 Hz
  • resonance frequency fs = 1050 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 3,3 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,25 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,2 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 97,7 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige SEAS TWS 27/6 (Ersatz für Audaphon TWS 25/6)
open a bigger photo

Seas Prestige SEAS TWS 27/6 (Ersatz für Audaphon TWS 25/6)  

order no. seas-tws27-6

EUR 61,10 excl. VAT: € 51.34 / $ 55.97

26 mm dome tweeter with fabric dome.

  • power handling (continuous/programme) = 90(ab2,5kHz) W
  • frequency range = 600-24000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,8 N/A
  • voice coil inductance L = 0,048 mH
  • effective piston radiating area Sd = 7,7 cm2
  • effective mechanical mass incl. air load mms = 0,28 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 25TFFN/QG (H02625)

Seas Prestige 25TFFN/QG (H02625)  

order no. seas-H0625-06

on request

26 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 3000-25000 Hz
  • resonance frequency fs = 1800 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,45 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 46 mm
  • overall diameter d = 60,5 mm
  • mounting depth (not countersunk) t = 18,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 26TFF (H1508)

Seas Prestige 26TFF (H1508)  

order no. seas-H1508-06

on request

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 1000 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 97,7 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TFF (H0831)

Seas Prestige 27TFF (H0831)  

order no. seas-H0831-06

EUR 52,50 excl. VAT: € 44.12 / $ 48.09

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 1200 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TFFC (H0881)

Seas Prestige 27TFFC (H0881)  

order no. seas-H0881-06

EUR 62,11 excl. VAT: € 52.19 / $ 56.89

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 80/200 W
  • frequency range = 2000-30000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,25 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TAFC/G (H0883)
open a bigger photo

Seas Prestige 27TAFC/G (H0883)  

order no. seas-H0883-06

EUR 58,20 excl. VAT: € 48.91 / $ 53.31

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 500 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,32 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TF1 (H1025)
open a bigger photo

Seas Prestige 27TF1 (H1025)  

order no. seas-H1025-06

EUR 89,00 excl. VAT: € 74.79 / $ 81.52

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 60/150 W
  • frequency range = 1800-22000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,29 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24 mm

show kits to this chassis hide kits


Seas Prestige 27TFD (H1096)  

order no. seas-H1096-06

on request

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 60/150 W
  • frequency range = 1600-22000 Hz
  • resonance frequency fs = 650 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 4,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,29 g
  • voice coil diameter = 26 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 42 mm

show kits to this chassis hide kits

Seas Prestige 27TBC/G (H1147)
open a bigger photo

Seas Prestige 27TBC/G (H1147)  

order no. seas-H1147-06

EUR 64,90 excl. VAT: € 54.54 / $ 59.45

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 600 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TBC/GTV (H1148)

Seas Prestige 27TBC/GTV (H1148)  

order no. seas-H1148-06

on request

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 28,5 mm
  • mass m = ss kg
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TDC (H1149)
open a bigger photo

Seas Prestige 27TDC (H1149)  

order no. seas-H1149-06

EUR 75,90 excl. VAT: € 63.78 / $ 69.52

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TDC/TV (H1150)

Seas Prestige 27TDC/TV (H1150)  

order no. seas-H1150-06

on request

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 800 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 89,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 28,5 mm
  • mass m = ss kg
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TDFC (H1189)

Seas Prestige 27TDFC (H1189)  

order no. seas-H1189-06

EUR 76,90 excl. VAT: € 64.62 / $ 70.44

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 1500-25000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,37 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27DFC/TV (H1210)

Seas Prestige 27DFC/TV (H1210)  

order no. seas-H1210-06

on request

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 800 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 89,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,37 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,5 mm
  • mounting depth (not countersunk) t = 28,5 mm
  • mass m = ss kg
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TDF (H1211)

Seas Prestige 27TDF (H1211)  

order no. seas-H1211-06

on request

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2500-25000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,4 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,37 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TBFC/G (H1212)

Seas Prestige 27TBFC/G (H1212)  

order no. seas-H1212-06

EUR 70,00 excl. VAT: € 58.82 / $ 64.12

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 1500-20000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,34 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TBFC/GTV (H1213)

Seas Prestige 27TBFC/GTV (H1213)  

order no. seas-H1213-06

on request

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-20000 Hz
  • resonance frequency fs = 750 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,34 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 28,5 mm
  • mass m = ss kg
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TBFG/G (H1214)

Seas Prestige 27TBFG/G (H1214)  

order no. seas-H1214-06

EUR 39,90 excl. VAT: € 33.53 / $ 36.55

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2500-20000 Hz
  • resonance frequency fs = 1100 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,34 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TAFNC/D (H1397)

Seas Prestige 27TAFNC/D (H1397)  

order no. seas-H1397-04

EUR 44,50 excl. VAT: € 37.39 / $ 40.76

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2500-30000 Hz
  • resonance frequency fs = 1170 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 2,7 Ohm
  • force factor BL = 1,9 N/A
  • voice coil inductance L = 0,03 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,45 mm
  • mounting diameter d = 46 mm
  • overall diameter d = 53 mm
  • mounting depth (not countersunk) t = 21,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TFFNC/CG (H1406)

Seas Prestige 27TFFNC/CG (H1406)  

order no. seas-H1406-04

EUR 43,21 excl. VAT: € 36.31 / $ 39.58

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 80/200 W
  • frequency range = 2500-30000 Hz
  • resonance frequency fs = 1170 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 2,7 Ohm
  • force factor BL = 1,9 N/A
  • voice coil inductance L = 0,03 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,26 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,45 mm
  • mounting diameter d = 46 mm
  • overall diameter d = 69,7 mm
  • mounting depth (not countersunk) t = 21,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TTFNC/GW (H1461)

Seas Prestige 27TTFNC/GW (H1461)  

order no. seas-H1461-06

on request

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 100/230 W
  • frequency range = 2500-25000 Hz
  • resonance frequency fs = 750 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 3,9 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,32 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 97,8 mm
  • mounting depth (not countersunk) t = 30,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TFFNC/G (H1396-04)
open a bigger photo

Seas Prestige 27TFFNC/G (H1396-04)  

order no. seas-H1396-04

EUR 41,90 excl. VAT: € 35.21 / $ 38.38

26 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 100/200 W
  • frequency range = 2500-30000 Hz
  • resonance frequency fs = 1170 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 2,7 Ohm
  • force factor BL = 1,9 N/A
  • voice coil inductance L = 0,03 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,26 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,45 mm
  • mounting diameter d = 46 mm
  • overall diameter d = 53 mm
  • mounting depth (not countersunk) t = 22 mm
  • mass m = 0,10 kg
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TDFNC/GW (H1462)

Seas Prestige 27TDFNC/GW (H1462)  

order no. seas-H1462-06

on request

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2500-30000 Hz
  • resonance frequency fs = 750 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90,5 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 3,9 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,31 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 97,8 mm
  • mounting depth (not countersunk) t = 30,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TBCD/GB-DXT (H1499)

Seas Prestige 27TBCD/GB-DXT (H1499)  

order no. seas-H1499-06

EUR 109,00 excl. VAT: € 91.60 / $ 99.84

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,7 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,5 mm
  • mounting depth (not countersunk) t = 59,3 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 27TAC/GB (H1825-06)
open a bigger photo

Seas Prestige 27TAC/GB (H1825-06)  

order no. seas-H1825-06

EUR 189,90 excl. VAT: € 159.58 / $ 173.94

26 mm tweeter with high quality cone. A pair of speakers is delivered (the price is for one pair).

  • power handling (continuous/programme) = 180/240 W
  • frequency range = 1000-30000 Hz
  • resonance frequency fs = 830 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 4,7 Ohm
  • force factor BL = 2,6 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 7,3 cm2
  • effective mechanical mass incl. air load mms = 0,36 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,2 mm
  • mounting diameter d = 84 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 36 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 29TFF/W (H1318)

Seas Prestige 29TFF/W (H1318)  

order no. seas-H1318-06

EUR 74,90 excl. VAT: € 62.94 / $ 68.61

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/200 W
  • frequency range = 2200-25000 Hz
  • resonance frequency fs = 950 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,7 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 8 cm2
  • effective mechanical mass incl. air load mms = 0,35 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige 29TAF/W (H1322)

Seas Prestige 29TAF/W (H1322)  

order no. seas-H1322-06

on request

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 100/220 W
  • frequency range = 2200-25000 Hz
  • resonance frequency fs = 950 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 4,7 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 8 cm2
  • effective mechanical mass incl. air load mms = 0,39 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24,5 mm
PDF data sheet

show kits to this chassis hide kits


 

Coaxial speaker

Seas Prestige T18RE/XFCTV2 (H1333)

recommended cabinet 1:
closed cabinet with 5,2 L volume
from 79/50 Hz (-3dB/-8dB)

recommended cabinet 2:
13,3 L volume bass reflex cabinet
with HP50 reflex tube, 22 cm long.
from 47/35 Hz (-3dB/-8dB).

Seas Prestige T18RE/XFCTV2 (H1333)  

order no. seas-H1333-08-06

EUR 219,00 excl. VAT: € 184.03 / $ 200.60

16 cm coax driver with high quality cone. The driver is magnetically shielded.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 30-25000 Hz
  • resonance frequency fs = 26 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 6,8 N/A
  • voice coil inductance L = 0,79 mH
  • effective piston radiating area Sd = 120 cm2
  • effective mechanical mass incl. air load mms = 13,7 g
  • equivalent volume of compliance Vas = 52 l
  • total Q factor Qts = 0,26 (Qms=1,63, Qes=0,31)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 100,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige L12RE/XFC (H1602)
open a bigger photo

recommended cabinet 1:
closed cabinet with 0,45 L volume
from 142/89 Hz (-3dB/-8dB)

recommended cabinet 2:
1,3 L volume bass reflex cabinet
with HP35 reflex tube, 35 cm long.
from 77/60 Hz (-3dB/-8dB).

Seas Prestige L12RE/XFC (H1602)  

order no. seas-H1602-04

EUR 192,00 excl. VAT: € 161.34 / $ 175.87

11 cm coax driver with high quality cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 60-25000 Hz
  • resonance frequency fs = 55 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 3,1 Ohm
  • force factor BL = 5,5 N/A
  • voice coil inductance L = 0,48 mH
  • effective piston radiating area Sd = 47 cm2
  • effective mechanical mass incl. air load mms = 9,2 g
  • equivalent volume of compliance Vas = 3 l
  • total Q factor Qts = 0,3 (Qms=2,99, Qes=0,33)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 95,8 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 69 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige MR18REX/XF (H1699-08/06)
open a bigger photo

Seas Prestige MR18REX/XF (H1699-08/06)  

order no. seas-H1699-08-06

EUR 249,00 excl. VAT: € 209.24 / $ 228.08

16 cm coax driver with high quality cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 200-22000 Hz
  • resonance frequency fs = 126 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 8,3 N/A
  • voice coil inductance L = 0,16 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 11,8 g
  • equivalent volume of compliance Vas = 3 l
  • total Q factor Qts = 0,69 (Qms=2,49, Qes=0,96)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige T18REX/XFC (H1353-08/06)
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,6 L volume
from 99/62 Hz (-3dB/-8dB)

recommended cabinet 2:
8,3 L volume bass reflex cabinet
with HP50 reflex tube, 23 cm long.
from 60/45 Hz (-3dB/-8dB).

Seas Prestige T18REX/XFC (H1353-08/06)  

order no. seas-H1353-08-06

EUR 251,00 excl. VAT: € 210.92 / $ 229.91

16 cm coax driver with high quality cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 30-20000 Hz
  • resonance frequency fs = 30 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,5 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 7,8 N/A
  • voice coil inductance L = 0,7 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 13,3 g
  • equivalent volume of compliance Vas = 42 l
  • total Q factor Qts = 0,25 (Qms=1,64, Qes=0,29)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 145 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 73 mm
PDF data sheet

show kits to this chassis hide kits


 

Mids

Seas Prestige FU10RB-04 (H1600-04)
open a bigger photo

Seas Prestige FU10RB-04 (H1600-04)  

order no. seas-H1600-04

EUR 89,00 excl. VAT: € 74.79 / $ 81.52

9 cm full range driver with high quality cone.

  • power handling (continuous/programme) = 40/100 W
  • frequency range = 100-20000 Hz
  • resonance frequency fs = 102 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 3,3 Ohm
  • force factor BL = 2,72 N/A
  • voice coil inductance L = 0,29 mH
  • effective piston radiating area Sd = 38,5 cm2
  • effective mechanical mass incl. air load mms = 4,5 g
  • equivalent volume of compliance Vas = 1 l
  • total Q factor Qts = 0,91 (Qms=3,15, Qes=1,28)
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 80 mm
  • overall diameter d = 98 mm
  • mounting depth (not countersunk) t = 43,6 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige FU10RB-08 (H1600-08)
open a bigger photo

Seas Prestige FU10RB-08 (H1600-08)  

order no. seas-H1600-08

EUR 89,00 excl. VAT: € 74.79 / $ 81.52

9 cm full range driver with high quality cone.

  • power handling (continuous/programme) = 40/100 W
  • frequency range = 100-20000 Hz
  • resonance frequency fs = 102 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 82,1 dB (2,83V; 1m)
  • DC resistance Re = 6,42 Ohm
  • force factor BL = 3,56 N/A
  • voice coil inductance L = 0,16 mH
  • effective piston radiating area Sd = 38,5 cm2
  • effective mechanical mass incl. air load mms = 4,05 g
  • equivalent volume of compliance Vas = 1 l
  • total Q factor Qts = 0,96 (Qms=3,25, Qes=1,36)
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 80 mm
  • overall diameter d = 98 mm
  • mounting depth (not countersunk) t = 43,6 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige MU10RB-SL (H1658-04)
open a bigger photo

Seas Prestige MU10RB-SL (H1658-04)  

order no. seas-H1658-04

EUR 89,00 excl. VAT: € 74.79 / $ 81.52

9 cm midrange driver with high quality cone.

  • power handling (continuous/programme) = 40/100 W
  • frequency range = 100-20000 Hz
  • resonance frequency fs = 100 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 84,7 dB (2,83V; 1m)
  • DC resistance Re = 3,3 Ohm
  • force factor BL = 2,9 N/A
  • voice coil inductance L = 0,14 mH
  • effective piston radiating area Sd = 38,5 cm2
  • effective mechanical mass incl. air load mms = 4,51 g
  • equivalent volume of compliance Vas = 1,1 l
  • total Q factor Qts = 0,67 (Qms=1,63, Qes=1,15)
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 80 mm
  • overall diameter d = 98 mm
  • mounting depth (not countersunk) t = 43,6 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige MCA12RC (H1304)

recommended cabinet 1:
closed cabinet with 4,1 L volume
from 97/61 Hz (-3dB/-8dB)

recommended cabinet 2:
16 L volume bass reflex cabinet
with HP50 reflex tube, 10 cm long.
from 43/38 Hz (-3dB/-8dB).

Seas Prestige MCA12RC (H1304)  

order no. seas-H1304-08

EUR 95,50 excl. VAT: € 80.25 / $ 87.47

11 cm midrange driver with high quality cone.

  • frequency range = 400-5000 Hz
  • resonance frequency fs = 68 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 4,2 N/A
  • voice coil inductance L = 0,31 mH
  • effective piston radiating area Sd = 55 cm2
  • effective mechanical mass incl. air load mms = 4,58 g
  • equivalent volume of compliance Vas = 5 l
  • total Q factor Qts = 0,57 (Qms=2,42, Qes=0,74)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,9 mm
  • mounting diameter d = 95,8 mm
  • overall diameter d = 120,4 mm
  • mounting depth (not countersunk) t = 55,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige MCA15RCY (H1262)

recommended cabinet 1:
closed cabinet with 1,1 L volume
from 162/102 Hz (-3dB/-8dB)

recommended cabinet 2:
2,7 L volume bass reflex cabinet
with HP35 reflex tube, 12 cm long.
from 96/72 Hz (-3dB/-8dB).

Seas Prestige MCA15RCY (H1262)  

order no. seas-H1262-08

EUR 109,90 excl. VAT: € 92.35 / $ 100.66

13 cm midrange driver with high quality cone.

  • frequency range = 100-4000 Hz
  • resonance frequency fs = 51 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89,5 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 6,8 N/A
  • voice coil inductance L = 0,73 mH
  • effective piston radiating area Sd = 80 cm2
  • effective mechanical mass incl. air load mms = 7,1 g
  • equivalent volume of compliance Vas = 12 l
  • total Q factor Qts = 0,25 (Qms=1,57, Qes=0,3)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1,7 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 67,5 mm
PDF data sheet

show kits to this chassis hide kits


 

Woofer

Seas Prestige CA12RCY (H1152)
open a bigger photo

recommended cabinet 1:
closed cabinet with 0,74 L volume
from 147/93 Hz (-3dB/-8dB)

recommended cabinet 2:
2,2 L volume bass reflex cabinet
with HP35 reflex tube, 19 cm long.
from 80/62 Hz (-3dB/-8dB).

Seas Prestige CA12RCY (H1152)  

order no. seas-H1152-08

EUR 94,90 excl. VAT: € 79.75 / $ 86.93

11 cm bass driver with paper cone.

  • power handling (continuous/programme) = 60/200 W
  • frequency range = 45-5000 Hz
  • resonance frequency fs = 57 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • force factor BL = 6,35 N/A
  • voice coil inductance L = 1,05 mH
  • effective piston radiating area Sd = 55 cm2
  • effective mechanical mass incl. air load mms = 6,1 g
  • equivalent volume of compliance Vas = 5 l
  • total Q factor Qts = 0,31 (Qms=2,17, Qes=0,36)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 95,8 mm
  • overall diameter d = 120,4 mm
  • mounting depth (not countersunk) t = 58,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige L12RCY/P (H1207)

recommended cabinet 1:
closed cabinet with 0,64 L volume
from 137/87 Hz (-3dB/-8dB)

recommended cabinet 2:
1,8 L volume bass reflex cabinet
with HP35 reflex tube, 28 cm long.
from 77/59 Hz (-3dB/-8dB).

Seas Prestige L12RCY/P (H1207)  

order no. seas-H1207-08

EUR 89,00 excl. VAT: € 74.79 / $ 81.52

11 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 70/200 W
  • frequency range = 55-3500 Hz
  • resonance frequency fs = 50 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,5 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 6,1 N/A
  • voice coil inductance L = 0,76 mH
  • effective piston radiating area Sd = 50 cm2
  • effective mechanical mass incl. air load mms = 6,8 g
  • equivalent volume of compliance Vas = 5 l
  • total Q factor Qts = 0,29 (Qms=2,34, Qes=0,33)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 95,6 mm
  • overall diameter d = 120,4 mm
  • mounting depth (not countersunk) t = 58,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige ER15RLY (H1455)
open a bigger photo

recommended cabinet 1:
closed cabinet with 2,4 L volume
from 110/69 Hz (-3dB/-8dB)

recommended cabinet 2:
7,5 L volume bass reflex cabinet
with HP35 reflex tube, 9 cm long.
from 59/46 Hz (-3dB/-8dB).

Seas Prestige ER15RLY (H1455)  

order no. seas-H1455-08

EUR 99,00 excl. VAT: € 83.19 / $ 90.68

13 cm bass driver with paper cone.

  • power handling (continuous/programme) = 60/250 W
  • frequency range = 50-4000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,5 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 5,5 N/A
  • voice coil inductance L = 0,73 mH
  • effective piston radiating area Sd = 80 cm2
  • effective mechanical mass incl. air load mms = 7,6 g
  • equivalent volume of compliance Vas = 15 l
  • total Q factor Qts = 0,32 (Qms=1,55, Qes=0,41)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 67,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige L15RLY/P (H1141)

recommended cabinet 1:
closed cabinet with 2,5 L volume
from 98/62 Hz (-3dB/-8dB)

recommended cabinet 2:
8,8 L volume bass reflex cabinet
with HP35 reflex tube, 10 cm long.
from 51/40 Hz (-3dB/-8dB).

Seas Prestige L15RLY/P (H1141)  

order no. seas-H1141-08

EUR 113,20 excl. VAT: € 95.13 / $ 103.69

13 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 80/200 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 5,7 N/A
  • voice coil inductance L = 0,84 mH
  • effective piston radiating area Sd = 75 cm2
  • effective mechanical mass incl. air load mms = 8,1 g
  • equivalent volume of compliance Vas = 12 l
  • total Q factor Qts = 0,36 (Qms=2,1, Qes=0,43)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 67,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige CA15RLY (H1216)

recommended cabinet 1:
closed cabinet with 2,6 L volume
from 104/65 Hz (-3dB/-8dB)

recommended cabinet 2:
8,5 L volume bass reflex cabinet
with HP50 reflex tube, 20 cm long.
from 55/43 Hz (-3dB/-8dB).

Seas Prestige CA15RLY (H1216)  

order no. seas-H1216-08

EUR 106,90 excl. VAT: € 89.83 / $ 97.92

13 cm bass driver with paper cone.

  • power handling (continuous/programme) = 60/250 W
  • frequency range = 50-4000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,5 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 5,5 N/A
  • voice coil inductance L = 0,82 mH
  • effective piston radiating area Sd = 80 cm2
  • effective mechanical mass incl. air load mms = 7,7 g
  • equivalent volume of compliance Vas = 14 l
  • total Q factor Qts = 0,34 (Qms=1,88, Qes=0,42)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 67,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige L16RNX (H1488-04)

recommended cabinet 1:
closed cabinet with 2,9 L volume
from 87/55 Hz (-3dB/-8dB)

recommended cabinet 2:
9,7 L volume bass reflex cabinet
with HP35 reflex tube, 11 cm long.
from 46/36 Hz (-3dB/-8dB).

Seas Prestige L16RNX (H1488-04)  

order no. seas-H1488-04

EUR 125,00 excl. VAT: € 105.04 / $ 114.50

13 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-2000 Hz
  • resonance frequency fs = 37 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 3,1 Ohm
  • force factor BL = 5,4 N/A
  • voice coil inductance L = 0,32 mH
  • effective piston radiating area Sd = 104 cm2
  • effective mechanical mass incl. air load mms = 14,7 g
  • equivalent volume of compliance Vas = 16 l
  • total Q factor Qts = 0,33 (Qms=2,31, Qes=0,38)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 126 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 70,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige L16RNX (H1488-08)

recommended cabinet 1:
closed cabinet with 3,4 L volume
from 87/55 Hz (-3dB/-8dB)

recommended cabinet 2:
11,7 L volume bass reflex cabinet
with HP50 reflex tube, 20 cm long.
from 45/35 Hz (-3dB/-8dB).

Seas Prestige L16RNX (H1488-08)  

order no. seas-H1488-08

on request

13 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-2000 Hz
  • resonance frequency fs = 39 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 0,48 mH
  • effective piston radiating area Sd = 104 cm2
  • effective mechanical mass incl. air load mms = 15,3 g
  • equivalent volume of compliance Vas = 16 l
  • total Q factor Qts = 0,36 (Qms=2,08, Qes=0,44)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 126 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 70,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige L16RNX3 (H1869-08)
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,1 L volume
from 78/49 Hz (-3dB/-8dB)

recommended cabinet 2:
9,9 L volume bass reflex cabinet
with HP35 reflex tube, 15 cm long.
from 41/32 Hz (-3dB/-8dB).

Seas Prestige L16RNX3 (H1869-08)  

order no. seas-H1869-08

EUR 389,00 excl. VAT: € 326.89 / $ 356.31

13 cm bass driver with aluminium cone. A pair of speakers is delivered (the price is for one pair).

  • power handling (continuous/programme) = 200/300 W
  • frequency range = 20-3000 Hz
  • resonance frequency fs = 32 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 84 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • force factor BL = 8,7 N/A
  • voice coil inductance L = 0,6 mH
  • effective piston radiating area Sd = 104 cm2
  • effective mechanical mass incl. air load mms = 20,8 g
  • equivalent volume of compliance Vas = 18 l
  • total Q factor Qts = 0,33 (Qms=5,48, Qes=0,35)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 126 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 70,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige L16RN/SL (H1480)
open a bigger photo

recommended cabinet 1:
closed cabinet with 7,2 L volume
from 66/42 Hz (-3dB/-8dB)

recommended cabinet 2:
29 L volume bass reflex cabinet
with HP50 reflex tube, 13 cm long.
from 32/26 Hz (-3dB/-8dB).

Seas Prestige L16RN/SL (H1480)  

order no. seas-H1480-08

EUR 139,00 excl. VAT: € 116.81 / $ 127.32

13 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-2000 Hz
  • resonance frequency fs = 37 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 84 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 6,1 N/A
  • voice coil inductance L = 0,64 mH
  • effective piston radiating area Sd = 104 cm2
  • effective mechanical mass incl. air load mms = 14,7 g
  • equivalent volume of compliance Vas = 19 l
  • total Q factor Qts = 0,45 (Qms=2,48, Qes=0,55)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 126 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 65,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige U16RCY/P (H1520)
open a bigger photo

recommended cabinet 1:
closed cabinet with 4 L volume
from 90/57 Hz (-3dB/-8dB)

recommended cabinet 2:
12,5 L volume bass reflex cabinet
with HP50 reflex tube, 17 cm long.
from 48/38 Hz (-3dB/-8dB).

Seas Prestige U16RCY/P (H1520)  

order no. seas-H1520-08

EUR 127,00 excl. VAT: € 106.72 / $ 116.33

13 cm bass driver with paper cone.

  • power handling (continuous/programme) = 60/250 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 36 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 6,3 N/A
  • voice coil inductance L = 0,81 mH
  • effective piston radiating area Sd = 99 cm2
  • effective mechanical mass incl. air load mms = 10,26 g
  • equivalent volume of compliance Vas = 25 l
  • total Q factor Qts = 0,32 (Qms=2,19, Qes=0,38)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 126 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 65,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige L18RDY/P (H1085)

recommended cabinet 1:
closed cabinet with 5,6 L volume
from 85/54 Hz (-3dB/-8dB)

recommended cabinet 2:
17 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 46/36 Hz (-3dB/-8dB).

Seas Prestige L18RDY/P (H1085)  

order no. seas-H1085-08

EUR 99,00 excl. VAT: € 83.19 / $ 90.68

16 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 35-2500 Hz
  • resonance frequency fs = 33 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 6,5 N/A
  • voice coil inductance L = 0,92 mH
  • effective piston radiating area Sd = 125 cm2
  • effective mechanical mass incl. air load mms = 12,7 g
  • equivalent volume of compliance Vas = 38 l
  • total Q factor Qts = 0,31 (Qms=2,01, Qes=0,37)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 73 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige U18RNX/P (H1571)
open a bigger photo

recommended cabinet 1:
closed cabinet with 5 L volume
from 93/59 Hz (-3dB/-8dB)

recommended cabinet 2:
18 L volume bass reflex cabinet
with HP70 reflex tube, 22 cm long.
from 48/38 Hz (-3dB/-8dB).

Seas Prestige U18RNX/P (H1571)  

order no. seas-H1571-08

EUR 159,00 excl. VAT: € 133.61 / $ 145.64

16 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 250 W
  • frequency range = 30-4000 Hz
  • resonance frequency fs = 43 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,9 Ohm
  • force factor BL = 6,9 N/A
  • voice coil inductance L = 0,25 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 13,4 g
  • equivalent volume of compliance Vas = 22 l
  • total Q factor Qts = 0,37 (Qms=2,05, Qes=0,45)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 83,2 mm
  • mass m = 1,9 kg
PDF data sheet

show kits to this chassis hide kits

Seas Prestige CA18RNX (H1215)
open a bigger photo

recommended cabinet 1:
closed cabinet with 4,9 L volume
from 90/57 Hz (-3dB/-8dB)

recommended cabinet 2:
14,8 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 49/38 Hz (-3dB/-8dB).

Seas Prestige CA18RNX (H1215)  

order no. seas-H1215-08

EUR 129,70 excl. VAT: € 108.99 / $ 118.80

16 cm bass driver with paper cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 35 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,5 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 136 cm2
  • effective mechanical mass incl. air load mms = 14 g
  • equivalent volume of compliance Vas = 33 l
  • total Q factor Qts = 0,31 (Qms=1,9, Qes=0,37)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige CA18RLY (H1217)

recommended cabinet 1:
closed cabinet with 13,7 L volume
from 72/46 Hz (-3dB/-8dB)

recommended cabinet 2:
56 L volume bass reflex cabinet
with HP70 reflex tube, 9 cm long.
from 34/28 Hz (-3dB/-8dB).

Seas Prestige CA18RLY (H1217)  

order no. seas-H1217-08

EUR 117,50 excl. VAT: € 98.74 / $ 107.63

16 cm bass driver with paper cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 35-3000 Hz
  • resonance frequency fs = 42 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 5,6 N/A
  • voice coil inductance L = 1,05 mH
  • effective piston radiating area Sd = 136 cm2
  • effective mechanical mass incl. air load mms = 10,6 g
  • equivalent volume of compliance Vas = 32 l
  • total Q factor Qts = 0,47 (Qms=2,92, Qes=0,56)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 73 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige L18RNX/P (H1224)

recommended cabinet 1:
closed cabinet with 4,5 L volume
from 93/58 Hz (-3dB/-8dB)

recommended cabinet 2:
13,5 L volume bass reflex cabinet
with HP50 reflex tube, 15 cm long.
from 51/39 Hz (-3dB/-8dB).

Seas Prestige L18RNX/P (H1224)  

order no. seas-H1224-08

EUR 129,00 excl. VAT: € 108.40 / $ 118.16

16 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 100/250 W
  • frequency range = 40-2500 Hz
  • resonance frequency fs = 36 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 1,06 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 13,6 g
  • equivalent volume of compliance Vas = 30 l
  • total Q factor Qts = 0,31 (Qms=2,09, Qes=0,36)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige ER18RNX (H1456)

recommended cabinet 1:
closed cabinet with 4,7 L volume
from 95/60 Hz (-3dB/-8dB)

recommended cabinet 2:
14,4 L volume bass reflex cabinet
with HP50 reflex tube, 13 cm long.
from 52/40 Hz (-3dB/-8dB).

Seas Prestige ER18RNX (H1456)  

order no. seas-H1456-08

EUR 141,80 excl. VAT: € 119.16 / $ 129.88

16 cm bass driver with paper cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 37 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,5 dB (2,83V; 1m)
  • DC resistance Re = 5,9 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 0,67 mH
  • effective piston radiating area Sd = 136 cm2
  • effective mechanical mass incl. air load mms = 14 g
  • equivalent volume of compliance Vas = 32 l
  • total Q factor Qts = 0,31 (Qms=1,58, Qes=0,39)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige CD22RN4X (H1192)

recommended cabinet 1:
closed cabinet with 9,1 L volume
from 66/42 Hz (-3dB/-8dB)

recommended cabinet 2:
21 L volume bass reflex cabinet
with HP70 reflex tube, 40 cm long.
from 40/30 Hz (-3dB/-8dB).

Seas Prestige CD22RN4X (H1192)  

order no. seas-H1192-08

EUR 159,90 excl. VAT: € 134.37 / $ 146.46

20 cm bass driver with paper cone.

  • power handling (continuous/programme) = 100/250 W
  • frequency range = 20-2500 Hz
  • resonance frequency fs = 20 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 11,4 N/A
  • voice coil inductance L = 3,47 mH
  • effective piston radiating area Sd = 230 cm2
  • effective mechanical mass incl. air load mms = 41,6 g
  • equivalent volume of compliance Vas = 108 l
  • total Q factor Qts = 0,24 (Qms=3,28, Qes=0,26)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 90 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige L22RN4X/P (H1208)
open a bigger photo

recommended cabinet 1:
closed cabinet with 9,3 L volume
from 64/40 Hz (-3dB/-8dB)

recommended cabinet 2:
24 L volume bass reflex cabinet
with HP70 reflex tube, 38 cm long.
from 38/28 Hz (-3dB/-8dB).

Seas Prestige L22RN4X/P (H1208)  

order no. seas-H1208-08

EUR 129,00 excl. VAT: € 108.40 / $ 118.16

20 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 125/300 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 21 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86,5 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 10,7 N/A
  • voice coil inductance L = 3,76 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 40 g
  • equivalent volume of compliance Vas = 93 l
  • total Q factor Qts = 0,27 (Qms=3,13, Qes=0,29)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 90 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige L22RNX/P (H1252)

recommended cabinet 1:
closed cabinet with 18 L volume
from 57/36 Hz (-3dB/-8dB)

recommended cabinet 2:
56 L volume bass reflex cabinet
with HP70 reflex tube, 17 cm long.
from 31/24 Hz (-3dB/-8dB).

Seas Prestige L22RNX/P (H1252)  

order no. seas-H1252-08

EUR 124,00 excl. VAT: € 104.20 / $ 113.58

20 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 110/300 W
  • frequency range = 25-2000 Hz
  • resonance frequency fs = 23 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 8,15 N/A
  • voice coil inductance L = 1,43 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 27 g
  • equivalent volume of compliance Vas = 112 l
  • total Q factor Qts = 0,32 (Qms=2,07, Qes=0,38)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 90 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige CA22RNX (H1288)
open a bigger photo

recommended cabinet 1:
closed cabinet with 30 L volume
from 56/35 Hz (-3dB/-8dB)

recommended cabinet 2:
117 L volume bass reflex cabinet
with HP100 reflex tube, 17 cm long.
from 27/22 Hz (-3dB/-8dB).

Seas Prestige CA22RNX (H1288)  

order no. seas-H1288-08

EUR 136,00 excl. VAT: € 114.29 / $ 124.57

20 cm bass driver with paper cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 30-3000 Hz
  • resonance frequency fs = 29 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89,5 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 7 N/A
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 230 cm2
  • effective mechanical mass incl. air load mms = 20,9 g
  • equivalent volume of compliance Vas = 97 l
  • total Q factor Qts = 0,41 (Qms=2,04, Qes=0,52)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 90 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige CA22RNY (H1471)

recommended cabinet 1:
closed cabinet with 11,3 L volume
from 90/57 Hz (-3dB/-8dB)

recommended cabinet 2:
33 L volume bass reflex cabinet
with HP100 reflex tube, 26 cm long.
from 50/38 Hz (-3dB/-8dB).

Seas Prestige CA22RNY (H1471)  

order no. seas-H1471-08

EUR 194,50 excl. VAT: € 163.45 / $ 178.16

20 cm bass driver with paper cone.

  • power handling (continuous/programme) = 90/250 W
  • frequency range = 35-2500 Hz
  • resonance frequency fs = 34 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 8,5 N/A
  • voice coil inductance L = 1,55 mH
  • effective piston radiating area Sd = 230 cm2
  • effective mechanical mass incl. air load mms = 17,8 g
  • equivalent volume of compliance Vas = 82 l
  • total Q factor Qts = 0,3 (Qms=1,69, Qes=0,36)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 97 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige U22REX/P-SL (H1659-08)
open a bigger photo

recommended cabinet 1:
closed cabinet with 12,2 L volume
from 82/52 Hz (-3dB/-8dB)

recommended cabinet 2:
33 L volume bass reflex cabinet
with HP70 reflex tube, 13 cm long.
from 47/36 Hz (-3dB/-8dB).

Seas Prestige U22REX/P-SL (H1659-08)  

order no. seas-H1659-08

EUR 189,00 excl. VAT: € 158.82 / $ 173.12

20 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 100/250 W
  • frequency range = 29-4000 Hz
  • resonance frequency fs = 29 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90,5 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 8 N/A
  • voice coil inductance L = 0,7 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 19,8 g
  • equivalent volume of compliance Vas = 103 l
  • total Q factor Qts = 0,29 (Qms=1,77, Qes=0,34)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 90 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige L26RFX/P (H1209)

recommended cabinet 1:
closed cabinet with 29 L volume
from 48/31 Hz (-3dB/-8dB)

recommended cabinet 2:
94 L volume bass reflex cabinet
with HP100 reflex tube, 33 cm long.
from 26/20 Hz (-3dB/-8dB).

Seas Prestige L26RFX/P (H1209)  

order no. seas-H1209-08

EUR 249,00 excl. VAT: € 209.24 / $ 228.08

25 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 125/300 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 20 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 10,7 N/A
  • voice coil inductance L = 1,83 mH
  • effective piston radiating area Sd = 330 cm2
  • effective mechanical mass incl. air load mms = 53 g
  • equivalent volume of compliance Vas = 171 l
  • total Q factor Qts = 0,33 (Qms=2,15, Qes=0,39)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 232,2 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 107,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige CA26RFX (H1305)

recommended cabinet 1:
closed cabinet with 24 L volume
from 68/43 Hz (-3dB/-8dB)

recommended cabinet 2:
78 L volume bass reflex cabinet
with HP100 reflex tube, 17 cm long.
from 36/28 Hz (-3dB/-8dB).

Seas Prestige CA26RFX (H1305)  

order no. seas-H1305-08

EUR 279,00 excl. VAT: € 234.45 / $ 255.55

25 cm bass driver with paper cone.

  • power handling (continuous/programme) = 100/300 W
  • frequency range = 30-1000 Hz
  • resonance frequency fs = 29 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90,5 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 10,7 N/A
  • voice coil inductance L = 1,95 mH
  • effective piston radiating area Sd = 350 cm2
  • effective mechanical mass incl. air load mms = 36,1 g
  • equivalent volume of compliance Vas = 129 l
  • total Q factor Qts = 0,34 (Qms=2,14, Qes=0,4)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 232,2 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 107,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige CA26RE4X (H1316)

recommended cabinet 1:
closed cabinet with 19 L volume
from 71/45 Hz (-3dB/-8dB)

recommended cabinet 2:
53 L volume bass reflex cabinet
with HP100 reflex tube, 27 cm long.
from 40/31 Hz (-3dB/-8dB).

Seas Prestige CA26RE4X (H1316)  

order no. seas-H1316-08

EUR 249,00 excl. VAT: € 209.24 / $ 228.08

25 cm bass driver with paper cone.

  • power handling (continuous/programme) = 80/300 W
  • frequency range = 30-1500 Hz
  • resonance frequency fs = 25 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 11,6 N/A
  • voice coil inductance L = 3,08 mH
  • effective piston radiating area Sd = 350 cm2
  • effective mechanical mass incl. air load mms = 38,5 g
  • equivalent volume of compliance Vas = 164 l
  • total Q factor Qts = 0,28 (Qms=3,99, Qes=0,3)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 232,2 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 100,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige A26RE4 (H1411-08)
open a bigger photo

recommended cabinet 1:
closed cabinet with 44 L volume
from 51/33 Hz (-3dB/-8dB)

recommended cabinet 2:
160 L volume bass reflex cabinet
with HP100 reflex tube, 14 cm long.
from 26/21 Hz (-3dB/-8dB).

Seas Prestige A26RE4 (H1411-08)  

order no. seas-H1411-08

EUR 237,00 excl. VAT: € 199.16 / $ 217.08

25 cm bass driver with paper cone.

  • power handling (continuous/programme) = 80/300 W
  • frequency range = 20-1500 Hz
  • resonance frequency fs = 25 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 9,7 N/A
  • voice coil inductance L = 3,8 mH
  • effective piston radiating area Sd = 350 cm2
  • effective mechanical mass incl. air load mms = 37,4 g
  • equivalent volume of compliance Vas = 169 l
  • total Q factor Qts = 0,39 (Qms=3,84, Qes=0,43)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 232 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 100,5 mm
PDF data sheet

show kits to this chassis hide kits


 

SEAS Extreme

Seas Prestige L26ROY (XM001-04)
open a bigger photo

recommended cabinet 1:
closed cabinet with 20 L volume
from 46/29 Hz (-3dB/-8dB)

recommended cabinet 2:
78 L volume bass reflex cabinet
with HP70 reflex tube, 19 cm long.
from 22/18 Hz (-3dB/-8dB).

Seas Extreme L26ROY (XM001-04)  

order no. seas-XM001-04

EUR 399,00 excl. VAT: € 335.29 / $ 365.47

25 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 250/500 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 25 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 3,3 Ohm
  • force factor BL = 12 N/A
  • voice coil inductance L = 0,73 mH
  • effective piston radiating area Sd = 342 cm2
  • effective mechanical mass incl. air load mms = 118 g
  • equivalent volume of compliance Vas = 56 l
  • total Q factor Qts = 0,42 (Qms=5,6, Qes=0,45)
  • voice coil diameter = 56 mm
  • maximum peak linear excursion vibration xlin = +/- 14 mm
  • mounting diameter d = 236 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 142,3 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige L26RO4Y (XM004-04)
open a bigger photo

recommended cabinet 1:
closed cabinet with 4,7 L volume
from 74/47 Hz (-3dB/-8dB)

recommended cabinet 2:
13 L volume bass reflex cabinet
with HP70 reflex tube, 53 cm long.
from 42/32 Hz (-3dB/-8dB).

Seas Extreme L26RO4Y (XM004-04)  

order no. seas-XM004-04

EUR 409,00 excl. VAT: € 343.70 / $ 374.63

25 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 250/500 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 26 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 3,5 Ohm
  • force factor BL = 17,7 N/A
  • voice coil inductance L = 2,33 mH
  • effective piston radiating area Sd = 342 cm2
  • effective mechanical mass incl. air load mms = 160 g
  • equivalent volume of compliance Vas = 40 l
  • total Q factor Qts = 0,27 (Qms=3,94, Qes=0,29)
  • voice coil diameter = 56 mm
  • maximum peak linear excursion vibration xlin = +/- 15 mm
  • mounting diameter d = 236 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 142,3 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige SL26R (XM003)
open a bigger photo

Seas Extreme SL26R (XM003)  

order no. seas-XM003

EUR 165,00 excl. VAT: € 138.66 / $ 151.13

25 cm passive radiator.

  • resonance frequency fs = 18 Hz
  • effective piston radiating area Sd = 342 cm2
  • effective mechanical mass incl. air load mms = 273 g
  • equivalent volume of compliance Vas = 50 l
  • maximum peak linear excursion vibration xlin = +/- 28 mm
  • mounting diameter d = 236 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 76,8 mm
PDF data sheet

show kits to this chassis hide kits


 

Passive Radiators

Seas Prestige SP18R (H9944)

Seas Prestige SP18R (H9944)  

order no. seas-H9944

EUR 108,00 excl. VAT: € 90.76 / $ 98.92

16 cm bass driver with high quality cone.

  • resonance frequency fs = 26 Hz
  • effective piston radiating area Sd = 130 cm2
  • effective mechanical mass incl. air load mms = 21,5 g
  • equivalent volume of compliance Vas = 41 l
  • maximum peak linear excursion vibration xlin = +/- 9,5 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 44 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige SP22R (H9945)

Seas Prestige SP22R (H9945)  

order no. seas-H9945

EUR 115,90 excl. VAT: € 97.39 / $ 106.16

20 cm bass driver with high quality cone.

  • resonance frequency fs = 22 Hz
  • effective piston radiating area Sd = 230 cm2
  • effective mechanical mass incl. air load mms = 28 g
  • equivalent volume of compliance Vas = 138 l
  • maximum peak linear excursion vibration xlin = +/- 10 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 56 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige SP26R (H9946)

Seas Prestige SP26R (H9946)  

order no. seas-H9946

EUR 167,00 excl. VAT: € 140.34 / $ 152.97

25 cm bass driver with high quality cone.

  • resonance frequency fs = 22 Hz
  • effective piston radiating area Sd = 350 cm2
  • effective mechanical mass incl. air load mms = 42 g
  • equivalent volume of compliance Vas = 214 l
  • maximum peak linear excursion vibration xlin = +/- 12,5 mm
  • mounting diameter d = 232,2 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 65,5 mm
PDF data sheet

show kits to this chassis hide kits


 

Full Range

Seas Prestige FA18RCZ (H1794-08)
open a bigger photo

recommended cabinet 1:
closed cabinet with 8,5 L volume
from 84/53 Hz (-3dB/-8dB)

recommended cabinet 2:
32 L volume bass reflex cabinet
with HP70 reflex tube, 13 cm long.
from 42/34 Hz (-3dB/-8dB).

Seas Prestige FA18RCZ (H1794-08)  

order no. seas-H1794-08

EUR 166,00 excl. VAT: € 139.50 / $ 152.05

16 cm full range driver with paper cone.

  • power handling (continuous/programme) = 40/110 W
  • frequency range = 45-20000 Hz
  • resonance frequency fs = 42 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89,7 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • force factor BL = 6,6 N/A
  • voice coil inductance L = 0,49 mH
  • effective piston radiating area Sd = 136 cm2
  • effective mechanical mass incl. air load mms = 12,1 g
  • equivalent volume of compliance Vas = 31 l
  • total Q factor Qts = 0,39 (Qms=6,29, Qes=0,42)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 145 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 73 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige FA22RCZ (H1597-08)
open a bigger photo

recommended cabinet 1:
closed cabinet with 26 L volume
from 69/43 Hz (-3dB/-8dB)

recommended cabinet 2:
89 L volume bass reflex cabinet
with HP100 reflex tube, 14 cm long.
from 36/28 Hz (-3dB/-8dB).

Seas Prestige FA22RCZ (H1597-08)  

order no. seas-H1597-08

EUR 220,00 excl. VAT: € 184.87 / $ 201.51

20 cm full range driver with paper cone.

  • power handling (continuous/programme) = 40/110 W
  • frequency range = 30-20000 Hz
  • resonance frequency fs = 30 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • force factor BL = 6,4 N/A
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 222 cm2
  • effective mechanical mass incl. air load mms = 12,6 g
  • equivalent volume of compliance Vas = 134 l
  • total Q factor Qts = 0,35 (Qms=4,36, Qes=0,38)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 186 mm
  • overall diameter d = 220 mm
  • mounting depth (not countersunk) t = 85 mm
PDF data sheet

show kits to this chassis hide kits


 

no longer sold

Seas Prestige L26RO4Y (D1004-04S)
open a bigger photo

recommended cabinet 1:
closed cabinet with 5 L volume
from 71/45 Hz (-3dB/-8dB)

recommended cabinet 2:
13,3 L volume bass reflex cabinet
with HP70 reflex tube, 57 cm long.
from 41/31 Hz (-3dB/-8dB).

Seas Prestige L26RO4Y (D1004-04S)  

order no. seas-D1004-04S

- not available

25 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 250/500 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 24 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85,5 dB (2,83V; 1m)
  • DC resistance Re = 3,3 Ohm
  • force factor BL = 18 N/A
  • voice coil inductance L = 3,85 mH
  • effective piston radiating area Sd = 363 cm2
  • effective mechanical mass incl. air load mms = 173 g
  • equivalent volume of compliance Vas = 46 l
  • total Q factor Qts = 0,26 (Qms=4,9, Qes=0,28)
  • voice coil diameter = 56 mm
  • maximum peak linear excursion vibration xlin = +/- 14 mm
  • mounting diameter d = 237 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 141 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige SL26R (D1003)
open a bigger photo

Seas Prestige SL26R (D1003)  

order no. seas-D1003

- not available

25 cm passive radiator.

  • resonance frequency fs = 16 Hz
  • effective piston radiating area Sd = 363 cm2
  • effective mechanical mass incl. air load mms = 260 g
  • equivalent volume of compliance Vas = 93 l
  • maximum peak linear excursion vibration xlin = +/- 28 mm
  • mounting diameter d = 237 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 76 mm
PDF data sheet

show kits to this chassis hide kits


Seas KTN25 F (H615)  

order no. I-6567

EUR 59,00 excl. VAT: € 49.58 / $ 54.04

26 mm tweeter with fabric cone.

  • power handling (continuous/programme) = 120/160 W
  • frequency range = 3000-25000 Hz
  • resonance frequency fs = 1800 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • voice coil diameter = 26 mm
  • mounting diameter d = 46 mm
  • overall diameter d = 48 mm
  • mounting depth (not countersunk) t = 14 mm

show kits to this chassis hide kits


Seas KT26 F (H0519)  

order no. not-available

- not available

26 mm tweeter with fabric cone.

  • power handling (continuous/programme) = 80/200 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 1100 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • voice coil diameter = 26 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 42 mm

show kits to this chassis hide kits

Seas Prestige KT27 F (H831)

Seas KT27 F (H831)  

order no. seas-H0831-06

EUR 52,50 excl. VAT: € 44.12 / $ 48.09

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 1200 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige KT28 F (H881)

Seas KT28 F (H881)  

order no. seas-H0881-06

EUR 62,11 excl. VAT: € 52.19 / $ 56.89

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 80/200 W
  • frequency range = 2000-30000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,25 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits


Seas Noferro 12 (H1069)  

order no. not-available

- not available

19 mm tweeter with fabric cone.

  • power handling (continuous/programme) = 40/60 W
  • frequency range = 2500-22000 Hz
  • resonance frequency fs = 1200 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 4 cm2
  • effective mechanical mass incl. air load mms = 0,17 g
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 67 mm
  • overall diameter d = 94 mm
  • mounting depth (not countersunk) t = 24 mm

show kits to this chassis hide kits

Seas Prestige Noferro 550 (H1149)
open a bigger photo

Seas Noferro 550 (H1149)  

order no. seas-H1149-06

EUR 75,90 excl. VAT: € 63.78 / $ 69.52

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige Noferro 600G (H1147)
open a bigger photo

Seas Noferro 600G (H1147)  

order no. seas-H1147-06

EUR 64,90 excl. VAT: € 54.54 / $ 59.45

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 600 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige Noferro 900 (H1025)
open a bigger photo

Seas Noferro 900 (H1025)  

order no. seas-H1025-06

EUR 89,00 excl. VAT: € 74.79 / $ 81.52

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 60/150 W
  • frequency range = 1800-22000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,29 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24 mm

show kits to this chassis hide kits

Seas Prestige TAF 27plus (H883)
open a bigger photo

Seas TAF 27plus (H883)  

order no. seas-H0883-06

EUR 58,20 excl. VAT: € 48.91 / $ 53.31

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 500 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,32 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige W121 AL (H1207)

recommended cabinet 1:
closed cabinet with 0,64 L volume
from 137/87 Hz (-3dB/-8dB)

recommended cabinet 2:
1,8 L volume bass reflex cabinet
with HP35 reflex tube, 28 cm long.
from 77/59 Hz (-3dB/-8dB).

Seas W121 AL (H1207)  

order no. seas-H1207-08

EUR 89,00 excl. VAT: € 74.79 / $ 81.52

bass driver with aluminium cone.

  • power handling (continuous/programme) = 70/200 W
  • frequency range = 55-3500 Hz
  • resonance frequency fs = 50 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,5 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 6,1 N/A
  • voice coil inductance L = 0,76 mH
  • effective piston radiating area Sd = 50 cm2
  • effective mechanical mass incl. air load mms = 6,8 g
  • equivalent volume of compliance Vas = 5 l
  • total Q factor Qts = 0,29 (Qms=2,34, Qes=0,33)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 95.6 mm
  • overall diameter d = 120,4 mm
  • mounting depth (not countersunk) t = 58,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige WA151 AL (H1141)

recommended cabinet 1:
closed cabinet with 2,5 L volume
from 98/62 Hz (-3dB/-8dB)

recommended cabinet 2:
8,8 L volume bass reflex cabinet
with HP35 reflex tube, 10 cm long.
from 51/40 Hz (-3dB/-8dB).

Seas WA151 AL (H1141)  

order no. seas-H1141-08

EUR 113,20 excl. VAT: € 95.13 / $ 103.69

13 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 80/200 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 5,7 N/A
  • voice coil inductance L = 0,84 mH
  • effective piston radiating area Sd = 75 cm2
  • effective mechanical mass incl. air load mms = 8,1 g
  • equivalent volume of compliance Vas = 12 l
  • total Q factor Qts = 0,36 (Qms=2,1, Qes=0,43)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 67,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige WA150 (H1216)

recommended cabinet 1:
closed cabinet with 2,6 L volume
from 104/65 Hz (-3dB/-8dB)

recommended cabinet 2:
8,5 L volume bass reflex cabinet
with HP50 reflex tube, 20 cm long.
from 55/43 Hz (-3dB/-8dB).

Seas WA150 (H1216)  

order no. seas-H1216-08

EUR 106,90 excl. VAT: € 89.83 / $ 97.92

13 cm bass driver with paper cone.

  • power handling (continuous/programme) = 60/250 W
  • frequency range = 50-4000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,5 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 5,5 N/A
  • voice coil inductance L = 0,82 mH
  • effective piston radiating area Sd = 80 cm2
  • effective mechanical mass incl. air load mms = 7,7 g
  • equivalent volume of compliance Vas = 14 l
  • total Q factor Qts = 0,34 (Qms=1,88, Qes=0,42)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 67,5 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige WA180 (H1215)
open a bigger photo

recommended cabinet 1:
closed cabinet with 4,9 L volume
from 90/57 Hz (-3dB/-8dB)

recommended cabinet 2:
14,8 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 49/38 Hz (-3dB/-8dB).

Seas WA180 (H1215)  

order no. seas-H1215-08

EUR 129,70 excl. VAT: € 108.99 / $ 118.80

16 cm bass driver with paper cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 35 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,5 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 136 cm2
  • effective mechanical mass incl. air load mms = 14 g
  • equivalent volume of compliance Vas = 33 l
  • total Q factor Qts = 0,31 (Qms=1,9, Qes=0,37)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige WA180 NAL (H1085)

recommended cabinet 1:
closed cabinet with 5,6 L volume
from 85/54 Hz (-3dB/-8dB)

recommended cabinet 2:
17 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 46/36 Hz (-3dB/-8dB).

Seas WA180 NAL (H1085)  

order no. seas-H1085-08

EUR 99,00 excl. VAT: € 83.19 / $ 90.68

16 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 35-2500 Hz
  • resonance frequency fs = 33 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 6,5 N/A
  • voice coil inductance L = 0,92 mH
  • effective piston radiating area Sd = 125 cm2
  • effective mechanical mass incl. air load mms = 12,7 g
  • equivalent volume of compliance Vas = 38 l
  • total Q factor Qts = 0,31 (Qms=2,01, Qes=0,37)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 73 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige WA181 AL (H1224)

recommended cabinet 1:
closed cabinet with 4,5 L volume
from 93/58 Hz (-3dB/-8dB)

recommended cabinet 2:
13,5 L volume bass reflex cabinet
with HP50 reflex tube, 15 cm long.
from 51/39 Hz (-3dB/-8dB).

Seas WA181 AL (H1224)  

order no. seas-H1224-08

EUR 129,00 excl. VAT: € 108.40 / $ 118.16

16 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 100/250 W
  • frequency range = 40-2500 Hz
  • resonance frequency fs = 36 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 1,06 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 13,6 g
  • equivalent volume of compliance Vas = 30 l
  • total Q factor Qts = 0,31 (Qms=2,09, Qes=0,36)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige W221 AL (H1208)
open a bigger photo

recommended cabinet 1:
closed cabinet with 9,3 L volume
from 64/40 Hz (-3dB/-8dB)

recommended cabinet 2:
24 L volume bass reflex cabinet
with HP70 reflex tube, 38 cm long.
from 38/28 Hz (-3dB/-8dB).

Seas W221 AL (H1208)  

order no. seas-H1208-08

EUR 129,00 excl. VAT: € 108.40 / $ 118.16

20 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 125/300 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 21 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86,5 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 10,7 N/A
  • voice coil inductance L = 3,76 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 40 g
  • equivalent volume of compliance Vas = 93 l
  • total Q factor Qts = 0,27 (Qms=3,13, Qes=0,29)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 90 mm
PDF data sheet

show kits to this chassis hide kits

Seas Prestige W260 AL (H1209)

recommended cabinet 1:
closed cabinet with 29 L volume
from 48/31 Hz (-3dB/-8dB)

recommended cabinet 2:
94 L volume bass reflex cabinet
with HP100 reflex tube, 33 cm long.
from 26/20 Hz (-3dB/-8dB).

Seas W260 AL (H1209)  

order no. seas-H1209-08

EUR 249,00 excl. VAT: € 209.24 / $ 228.08

25 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 125/300 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 20 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 10,7 N/A
  • voice coil inductance L = 1,83 mH
  • effective piston radiating area Sd = 330 cm2
  • effective mechanical mass incl. air load mms = 53 g
  • equivalent volume of compliance Vas = 171 l
  • total Q factor Qts = 0,33 (Qms=2,15, Qes=0,39)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 232,2 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 107,5 mm
PDF data sheet

show kits to this chassis hide kits


Seas Noferro 650 (H1096)  

order no. not-available

- not available

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 60/150 W
  • frequency range = 1600-22000 Hz
  • resonance frequency fs = 650 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 4,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,29 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 42 mm

show kits to this chassis hide kits

Seas Prestige Noferro 800/TV (H1150)

Seas Noferro 800/TV (H1150)  

order no. not-available

- not available

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 55/150 W
  • frequency range = 200-25000 Hz
  • resonance frequency fs = 800 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 89,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 28,5 mm
  • mass m = ss kg
PDF data sheet

show kits to this chassis hide kits

Seas Prestige Noferro 900 G/TV (H1148)

Seas Noferro 900 G/TV (H1148)  

order no. not-available

- not available

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 28,5 mm
  • mass m = ss kg
PDF data sheet

show kits to this chassis hide kits


Seas K30 D  

order no. not-available

- not available

26 mm tweeter with metal cone.

  • power handling (continuous/programme) = 90/140 W
  • frequency range = 1600-25000 Hz
  • resonance frequency fs = 650 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • effective piston radiating area Sd = 7 cm2
  • voice coil diameter = 26 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 42 mm

show kits to this chassis hide kits

Seas Prestige 25TAFN/QG (H0623)

Seas Prestige 25TAFN/QG (H0623)  

order no. not-available

- not available

19,5 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 4000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 2,6 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 4 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 46 mm
  • overall diameter d = 60,5 mm
  • mounting depth (not countersunk) t = 18,5 mm
PDF data sheet

show kits to this chassis hide kits


Seas KT25 F (H457)  

order no. not-available

- not available

26 mm tweeter with fabric cone.

  • power handling (continuous/programme) = 120/160 W
  • frequency range = 3000-25000 Hz
  • resonance frequency fs = 1400 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • voice coil diameter = 26 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 28 mm

show kits to this chassis hide kits


Seas K29 FD (H587)  

order no. not-available

- not available

26 mm tweeter with metal cone.

  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 1400 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • effective piston radiating area Sd = 7 cm2
  • voice coil diameter = 26 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 28 mm

show kits to this chassis hide kits


Seas K19 F  

order no. not-available

- not available

19 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 90/120 W
  • frequency range = 2000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • voice coil diameter = 19 mm
  • mounting diameter d = 67 mm
  • overall diameter d = 94 mm
  • mounting depth (not countersunk) t = 24 mm

show kits to this chassis hide kits


Seas KT19 F  

order no. not-available

- not available

19 mm tweeter with fabric cone.

  • power handling (continuous/programme) = 90/120 W
  • frequency range = 2000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • voice coil diameter = 19 mm
  • mounting diameter d = 67 mm
  • overall diameter d = 94 mm
  • mounting depth (not countersunk) t = 24 mm

show kits to this chassis hide kits


recommended cabinet 1:
closed cabinet with 2,1 L volume
from 100/63 Hz (-3dB/-8dB)

recommended cabinet 2:
6,3 L volume bass reflex cabinet
with HP35 reflex tube, 14 cm long.
from 55/42 Hz (-3dB/-8dB).

Seas W14 AL  

order no. not-available

- not available

12 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 80/200 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 39 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,5 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • effective piston radiating area Sd = 75 cm2
  • equivalent volume of compliance Vas = 14 l
  • total Q factor Qts = 0,31 (Qms=1,8, Qes=0,38)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 113 mm
  • overall diameter d = 133 mm
  • mounting depth (not countersunk) t = 69 mm

show kits to this chassis hide kits


recommended cabinet 1:
closed cabinet with 3,7 L volume
from 101/64 Hz (-3dB/-8dB)

recommended cabinet 2:
10,9 L volume bass reflex cabinet
with HP50 reflex tube, 16 cm long.
from 56/43 Hz (-3dB/-8dB).

Seas WP180XP coax (T18 RE coax)  

order no. not-available

- not available

16 cm coax driver with high quality cone.

  • power handling (continuous/programme) = 80/250 W
  • frequency range = 40-25000 Hz
  • resonance frequency fs = 38 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • effective piston radiating area Sd = 120 cm2
  • equivalent volume of compliance Vas = 27 l
  • total Q factor Qts = 0,3 (Qms=1,11, Qes=0,41)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 145 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 95 mm

show kits to this chassis hide kits


recommended cabinet 1:
closed cabinet with 11,3 L volume
from 80/50 Hz (-3dB/-8dB)

recommended cabinet 2:
36 L volume bass reflex cabinet
with HP100 reflex tube, 31 cm long.
from 43/33 Hz (-3dB/-8dB).

Seas WP211 D  

order no. not-available

- not available

20 cm bass driver with polypropylene cone.

  • power handling (continuous/programme) = 120/180 W
  • frequency range = 35-2500 Hz
  • resonance frequency fs = 33 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • effective piston radiating area Sd = 223 cm2
  • equivalent volume of compliance Vas = 66 l
  • total Q factor Qts = 0,33 (Qms=1,8, Qes=0,41)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 187 mm
  • overall diameter d = 216 mm
  • mounting depth (not countersunk) t = 80 mm

show kits to this chassis hide kits

Seas Prestige P21REX/DD (H596)
open a bigger photo

Seas Prestige P21REX/DD (H596)  

order no. not-available

- not available

bass driver with high quality cone.

show kits to this chassis hide kits

Seas Prestige L26ROY (D1001-04S)
open a bigger photo

recommended cabinet 1:
closed cabinet with 13,9 L volume
from 55/35 Hz (-3dB/-8dB)

recommended cabinet 2:
43 L volume bass reflex cabinet
with HP70 reflex tube, 26 cm long.
from 30/23 Hz (-3dB/-8dB).

Seas Prestige L26ROY (D1001-04S)  

order no. not-available

- not available

25 cm bass driver with aluminium cone.

  • power handling (continuous/programme) = 250/500 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 22 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 3,1 Ohm
  • force factor BL = 12 N/A
  • voice coil inductance L = 0,53 mH
  • effective piston radiating area Sd = 363 cm2
  • effective mechanical mass incl. air load mms = 107 g
  • equivalent volume of compliance Vas = 87 l
  • total Q factor Qts = 0,31 (Qms=4,14, Qes=0,33)
  • voice coil diameter = 56 mm
  • maximum peak linear excursion vibration xlin = +/- 14 mm
  • mounting diameter d = 237 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 141 mm
PDF data sheet

show kits to this chassis hide kits

Tweeter   Coaxial speaker   Mids   Woofer   SEAS Extreme   Passive Radiators   Full Range   no longer sold  
The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright (c) Daniel Gattig, 2023; All rights reserved. - errors and omissions excepted