Microphone stands

LD Systems LDMICSET1 - Microphone SET - Microphone, stand, XLR cable and cable clip

• Stage-ready microphone with fitting gig bag
• Sturdy microphone stand with cable clip
• XLR microphone cable, 5 m

A handheld dynamic microphone - made for the stage:

• Sturdy dynamic hypercardioid microphone
• Sturdy headgrille
• High feedback resistance
• Lockable siwtch
• Wide frequency spectrum
• Type: Dynamic
• Pattern: Hyper Cardioid
• Frequency response: 60 Hz - 15000 Hz
• Sensitivity (dBV/pa): - 53 dB + / - 3 dB (0 dB = 1 V / Pa at 1 kHz)
• Rated Impedance:<600 ohms
• Max. SPL: 144 dB
• Connector: 3-Pin XLR
• Accessories: gig bag (leather) and microphone clip included
• Dimension: 50 mm x 165 mm

Black microphone stand with pivoting arm:

Heavy duty steel base with folding legs Height: 100 - 160 cm Boom arm length: 70 cm

XLR microphone cable male/female, 5 meter

PDF data sheet Data sheet (in five languages)

price per piece   (Order No ah-LDMICSET1) EUR 47,00 excl. VAT: € 39.50 / $ 43.84
 

Microphone stand M19900B, black

• Extremely compact microphone stand
• Three-piece shaft
• Non-marring height-adjustment system
• Lightweight plastic base with folding legs
• Weight: 1.5 kg
• H: 625/1480 mm

price per piece   (Order No ah-M19900B) EUR 47,50 excl. VAT: € 39.92 / $ 44.31 black
 

Microphone stand M20000B, black

• Cast-iron base and legs, with plastic-coating
• Anti-vibration filters in legs
• Telescopic height-adjustment from 900 to 1600 mm
• Foldable legs
• Weight: 2.7 kg

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M20000B) EUR 77,00 excl. VAT: € 64.71 / $ 71.82 black
 

Microphone stand M20120B,black

• Folding, short-legged design with cast-iron base
• Noiseless height-adjustment
• Weight: 2.0 kg
• H: 890/1590 mm
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M20120B) EUR 44,50 excl. VAT: € 37.39 / $ 41.51 black
 

Special stand M20800B, black

• Stable foldable base
• Three-section telescopic height-adjustment from 1290 to 3000 mm
• 3/8" thread top
• Special clamps protect the finish
• Weight: 4.5 kg

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M20800B) EUR 98,00 excl. VAT: € 82.35 / $ 91.41 black
 

Overhead microphone stand M20811B, black

• Adjustable up to 3 m
• This sturdy mic stand is designed for special stage and studio applications
• Collapsible base
• Solid steel construction
• 2-piece extension tube with 3/8 thread
• Height-adjustment with non-marring locking screws
• Weight: 4.6 kg
• H: 1290/3010 mm
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M20811B) EUR 236,00 excl. VAT: € 198.32 / $ 220.13 black
 

Microphone stand M21020, nickel-plated

• Worldwide proven standard model
• Cast-iron base
• Long leg construction
• Foldable
• Height-adjustable from 890 to 1600 mm
• Boom arm 840 mm
• Nickel-plated
• Weight: 3.5 kg

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21020) EUR 62,00 excl. VAT: € 52.10 / $ 57.83 nickel-plated
 

Microphone stand M21020B, black

• Worldwide proven standard model
• Cast-iron base
• Long leg construction
• Foldable
• Height-adjustable from 890 to 1600 mm
• Boom arm 840 mm
• Black
• Weight: 3.5 kg

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21020B) EUR 57,90 excl. VAT: € 48.66 / $ 54.01 black
 

Overhead microphone stand M21021B, black

• Extremely tall model with a longer boom arm length
• Cast-iron base
• Long leg construction
• Foldable
• Height-adjustable from 1100 to 2020 mm
• Boom arm 1070 mm
• Weight: 5.65 kg
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21021B) EUR 90,00 excl. VAT: € 75.63 / $ 83.95 black
 

Microphone stand M21060, nickel-plated

• Modern update of the classic 21020, with boom arm
• The compact zinc die-cast base and long legs provide excellent stability
• Boom arm with 3/8" thread
• Nickel-plated
• Weight: 3 kg
• Height: 92-163 cm
• Boom arm length: 80 cm
• Nickel plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21060) EUR 53,00 excl. VAT: € 44.54 / $ 49.44 nickel-plated
 

Microphone stand M21060B, black

• Modern update of the classic 21020, with boom arm
• The compact zinc die-cast base and long legs provide excellent stability
• Boom arm with 3/8" thread
• Black
• Weight: 3 kg
• Height: 92-163 cm
• Boom arm length: 80 cm
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21060B) EUR 53,00 excl. VAT: € 44.54 / $ 49.44 black
 

Metal microphone stand M21070B

Consists of tubing assembly, boom arm and zinc die-cast base with long folding legs. Square swivel joint with large wing nut.

Technical Data

• Heigth: 1010/1720 mm
• Arm boom length: 805 mm
• Weigth: 3 kg

price per piece   (Order No ah-M21070B) EUR 46,50 excl. VAT: € 39.08 / $ 43.37
 

Microphone stand M21080, nickel-plated

• Like model 210/6, but with extendable boom arm
• Weigth: 3,0 kg
• H: 925/1630 mm
• BL: 425/725 mm
• Weigth: 3 kg
• Nickel-plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21080) EUR 62,00 excl. VAT: € 52.10 / $ 57.83 nickel plated
 

Microphone stand M21080B, black

• Like model 210/6, but with extendable boom arm
• Weight: 3.0 kg
• H: 925/1630 mm
• BL: 425/725 mm
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21080B) EUR 62,00 excl. VAT: € 52.10 / $ 57.83 black
 

Microphone stand M21090, nickel-plated

• A more compact version of the classic 210/2
• The combination of the long-legged 201A/2 mic stand and the 211/1 telescopic boom arm
• Like the 210/2, the 210/9 sets the standard for professional microphone boom stands
• Weight: 3.2 kg
• H: 900/1605 mm
• BL: 460/770 mm
• Nickel-plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21090) EUR 68,00 excl. VAT: € 57.14 / $ 63.43 nickel-plated
 

Microphone stand M21090B, black

• A more compact version of the classic 210/2
• The combination of the long-legged 201A/2 mic stand and the 211/1 telescopic boom arm
• Like the 210/2, the 210/9 sets the standard for professional microphone boom stands
• Weight: 3.2 kg
• H: 900/1605 mm
• BL: 460/770 mm
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21090B) EUR 68,00 excl. VAT: € 57.14 / $ 63.43 black
 

Swivelarm M21100, nickel-plated

• Boom arm length 840 mm
• 3/8" thread
• Locking washer
• Plastic handgrip
• Easy to tighten with locking T-bar handknob
• Weight: 0.9 kg
• Nickel-plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21100) EUR 22,50 excl. VAT: € 18.91 / $ 20.99 nickel-plated
 

Boom arm M21110, nickel-plated

• Classic 2-piece telescopic boom arm with 3/8 thread
• Silent, scratchless swivel joint for adjustment of angle
• Easy tightening with T-bar locking screw
• Weight: 0.8 kg
• BL: 470/770 mm
• Nickel-plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21110) EUR 27,00 excl. VAT: € 22.69 / $ 25.18 nickel-plated
 

Boom arm M21110B, black

• Classic 2-piece telescopic boom arm with 3/8 thread
• Silent, scratchless swivel joint for adjustment of angle
• Easy tightening with T-bar locking screw
• Weight: 0.8 kg
• BL: 470/770 mm
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21110B) EUR 27,00 excl. VAT: € 22.69 / $ 25.18 black
 

Boom arm M21140B, black

• Two-piece telescopic boom arm with 3/8 thread
• Complete with locking washer and plastic grip
• Smooth, silent and scratch-free adjustment thanks to large wing nut
• Weight: 0.6 kg
• BL: 425/725 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21140B) EUR 22,00 excl. VAT: € 18.49 / $ 20.52 black
 

Boom arm M21160B, black

• Short one-piece boom arm with 3/8 thread
• Locking washer and plastic grip
• Smooth adjustment
• Easy to tighten with wing nut
• Weight: 0.5 kg
• BL: 395 mm

price per piece   (Order No ah-M21160B) EUR 16,40 excl. VAT: € 13.78 / $ 15.30 black
 

Boom arm M21231B for overhead microphone stands, black

• Telescopic boom arm with 3/8 thread
• Adjustable counterweight
• For use with model 20811 and 21411
• Weight: 4.0 kg
• BL: 1155/2060 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21231B) EUR 116,00 excl. VAT: € 97.48 / $ 108.20 black
 

K&M Overhead microphone stand M21411B, black

• Extremely sturdy overhead mic stand for studio and broadcast applications
• Extendible up to 2 m
• Locking height-adjustment mechanism for added safety
• 1/2 thread for use with 21231 boom arm
• Collapsible design for easy transport and storage
• Weight: 4.8 kg
• H: 1480/2290 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M21411B) EUR 114,00 excl. VAT: € 95.80 / $ 106.34 black
 

Table / floor stand M23400B, black

• Combined table and floor stand with heavy cast base plate
• Two-piece angle adjustable tubing
• Best for: drums and studio or conference rooms
• Arm boom, length: 400/640 mm
• Weigth: 2,1 kg

price per piece   (Order No ah-M23400B) EUR 58,00 excl. VAT: € 48.74 / $ 54.10 black
 

Microphone swivel bar M24010B, black

• Attaches to stands with a clamp locking assembly to 22 mm
• Complete with boom arm, 550 mm
• Weight: 1.0 kg
• H: 300 mm

price per piece   (Order No ah-M24010B) EUR 34,00 excl. VAT: € 28.57 / $ 31.71 black
 

Microphone stand M25200B, black

• Cast-iron base
• Foldable legs
• Three-section telescoping tube allows height-adjustment from 610 to 1550 mm
• Non-scratching clutches to protect the finish
• Boom arm adjustable from 460 to 765 mm
• Weight: 3.2 kg
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M25200B) EUR 76,00 excl. VAT: € 63.87 / $ 70.89 black
 

Microphone stand M25500B, black

• Low-height 340 mm
• Cast-iron base
• Foldable legs
• Extra long, telescopic boom arm adjustable from 850 to 1540 mm
• Weight: 3.0 kg
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M25500B) EUR 76,00 excl. VAT: € 63.87 / $ 70.89 black
 

Microphone stand M25600B, black

• High-quality microphone stand with telescopic boom arm
• Cast-iron base with folding legs
• Unique design retains all screws and levers without tension
• Patented clamping lever can be fixed in any position, for holding mic cable, etc.
• Weight: 3.4 kg
• H: 970/1640 mm
• BL: 600/955 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M25600B) EUR 95,00 excl. VAT: € 79.83 / $ 88.61 black
 

Table microphone clamp M25800B, black

• Extendible steel tubing
• Clamping mechanism allows tube to swivel full 360 degrees
• Clamp adjustable to 63 mm
• Weight: 0.8 kg
• H: 560/1020 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M25800B) EUR 48,50 excl. VAT: € 40.76 / $ 45.24 black
 

Microphone stand M25900B, black

• Low-height
• Adjustable from 450 to 1250 mm
• Cast-iron base
• Foldable legs
• Complete with telescopic boom arm adjustable from 460 to 765 mm
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M25900B) EUR 66,00 excl. VAT: € 55.46 / $ 61.56 black
 

Low microphone stand M25910B, black

• Low-height
• Adjustable from 450 to 1250 mm
• Cast-iron base
• Foldable legs
• Complete with telescopic boom arm adjustable from 460 to 765 mm
• Weight: 2.3 kg
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M25910B) EUR 57,00 excl. VAT: € 47.90 / $ 53.17 black
 

Microphone stand M26000, nickel-plated

• Heavy round cast-iron base
• Anti-vibration rubber insert for noise filtration
• Base diameter 250 mm
• Height-adjustable by clutch from 870 to 1570 mm
• Weight: 6.0 kg
• Nickel-plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M26000) EUR 51,00 excl. VAT: € 42.86 / $ 47.57 nickel-plated
 

Microphone stand M26000B, black

• Heavy round cast-iron base
• Anti-vibration rubber insert for noise filtration
• Base diameter 250 mm
• Height-adjustable by clutch from 870 to 1570 mm
• Weight: 6.0 kg
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M26000B) EUR 51,00 excl. VAT: € 42.86 / $ 47.57 black
 

Microphone stand M26010, nickel-plated

• Height adjustable
• Round cast-iron base with sound-absorbing rubber insert
• Extremely stable and steady
• Weight: 3.5 kg
• Height: 87-157 cm
• Base diameter: 25 cm
• Nickel-plated

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M26010) EUR 43,00 excl. VAT: € 36.13 / $ 40.11 nickel-plated
 

Microphone stand M26010B, black

• Height adjustable
• Round cast-iron base with sound-absorbing rubber insert
• Extremely stable and steady
• Weight: 3.5 kg
• Height: 87-157 cm
• Base diameter: 25 cm
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M26010B) EUR 38,50 excl. VAT: € 32.35 / $ 35.91 black
 

König & Meyer Microphone stand M26085B, with one hand latching handle, black

• Unique one hand latching mechanism handle with »Soft-Touch« coating
• One button up and down movement
• Steady and sturdy heavy round metal base
• Extremely durable high-quality powder coating
• Heigth: 1060/1790 mm
• Weight: 3,2 kg

price per piece   (Order No ah-M26085B) EUR 63,00 excl. VAT: € 52.94 / $ 58.76 black
 

Microphone stand M27105B, black

• Glass-fiber-reinforced plastic base
• Foldable legs
• Height-adjustable from 900 to 1600 mm
• Non-scratching locking screw
• Complete with boom arm 800 mm
• Weight: 2.55 kg
• Black

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M27105B) EUR 44,00 excl. VAT: € 36.97 / $ 41.04 black
 

Gooseneck table base M29390B, black

• Black cast-iron base with a horizontally mounted XLR female socket on upper face
• Removable plate, suitable for fitting switches, indicators, controls or connectors, with access to space for additional circuitry
• Base is fitted with rear mounted 3-pole XLR male connector
• Weight: 2.4 kg
• Dimensions: 160 x 150 x 51 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M29390B) EUR 99,00 excl. VAT: € 83.19 / $ 92.34 black
 

Gooseneck table base M29394B, with switch, black

• Black cast-iron base with a horizontally mounted XLR female socket on upper face
• Removable plate with mounted LED illuminated single pole changeover switch
• Base is fitted with rear mounted 5 pole XLR male connector
• Weight: 2.3 kg
• Dimensions: 160 x 150 x 51 mm

PDF data sheet Replacement list, technical drawing

price per piece   (Order No ah-M29394B) EUR 102,00 excl. VAT: € 85.71 / $ 95.14 black
 

Microphone Stand with round base S22, black

• Handy microphone stand with round base and plastic surround
• Black powder coated
• Heigth: 90 cm - 160 cm
• Weigth: 4,51 kg

price per piece   (Order No ah-S22) EUR 27,00 excl. VAT: € 22.69 / $ 25.18 black
 

Adam Hall Microphone stand 94-160cm S5B, black

• Microphone stand
• With boom arm
• Black
• Heavy duty steel base with folding legs
• Weight: 2,7kg
• Height: 94-160 cm
• Boom arm length: 79cm

price per piece   (Order No ah-S5B) EUR 24,00 excl. VAT: € 20.17 / $ 22.39 black
 

Microphone stand with boom S6B, black

• Microphone stand black with telescopic boom arm
• Heavy duty die cast base with folding legs
• Weight 2,5 kg
• Height 94-160 cm
• Telescopic boom arm, length: 50 - 80 cm

price per piece   (Order No ah-S6B) EUR 26,00 excl. VAT: € 21.85 / $ 24.25 black
 

Small microphone stand S7B, with round base, black

• Small microphone stand black with massive round cast base
• For guitar, amp, drum, brass a.s.o.
• Height 40 cm
• Telescopic boom arm, length: 48 - 80 cm
• Weight: 4,0 kg

price per piece   (Order No ah-S7B) EUR 24,00 excl. VAT: € 20.17 / $ 22.39 black
 

Table microphone stand S8B, black

• Table microphone stand
• With 5/8" thread adapter
• With microphone holder
• Blister pack
• Height:11-17.5 cm
• Length: 20 x 20 x 20 cm spread

price per piece   (Order No ah-S8B) EUR 10,90 excl. VAT: € 9.16 / $ 10.17 black
 

Small microphone stand S9B, with boom, black

• Small microstand black
• For guitar, amp, drum, brass a.s.o.
• Material: metal
• Height: 50 - 70 cm
• Telescopic boom arm, length: 50 - 80 cm
• Weight: 2,0 kg

price per piece   (Order No ah-S9B) EUR 24,00 excl. VAT: € 20.17 / $ 22.39 black
 

Adam Hall Transport bag SMICBAG, for 2 microphone stands, black

• Transport bag for microphone stands
• Dimensions (Length x Diameter): 105 cm x 12 cm
• Water-repellent
• Convenient for 2 microphone stands (i.e. S5B or S6B)

price per piece   (Order No ah-SMICBAG) EUR 10,90 excl. VAT: € 9.16 / $ 10.17 black