Auditorium Sub XL   Subwoofer por K+T 5/2022

Datos técnicos
  • Impedancia: 4 Ohm
  • Nivel de presión sonora (2,83V/1m): aktiv dB
  • Dimensiones (ancho x alto x profundidad): 350 x 900 x 350 mm
  • Rango de frecuencia (-8dB): 22 a 100 Hz
  • Frecuencia (s) Crossover: aktiv Hz
  • Principio: con radiador pasivo

Auditorium Sub XL es un subwoofer versátil que presta apoyo a tus altvoces con un bajo potente y profundo .

Auditorium Monitor puede complementarse perfectamente con Auditorium Sub o, aún más potente, con Auditorium Sub XL.

Auditorium Sub XL es un altavoz de alta gama con chasis fabricado por la empresa Wavecor , que incorpora membranas pasivasn para la afinación de los bajos.

El kit incluye 2 subwoofers Wavecor SW275BD01 + 4x Wavecor PR275BD01

La columna de altavoz Kura ha sido desarrollada por Dennis Frank y Daniel Gattig.

La respuesta de frecuencia del altavoz es perfectamente lineal.

Extracto del test de audición de la revista Klang+Ton (Traducción del autor al inglés)

"What can I say? For the first time ever I had the feeling that our listening room was too small - and not because it would have boomed unduly - on the contrary: I have never experienced such a disciplined and at the same time such a deep bass - great respect to the developers, who have not relied on a cheap sensation here. No, the problem was the listening distance, which only feels "right" from about 4 meters and more, because then the precision and size of the voices and instruments gets realistic - closer up, it is impressive, but everything, really everything seems a bit too large. With the right distance, however, the world of really big, really good studio monitors opens up, which really doesn't miss anything, absolutely nothing, and which don't let anything loud or dynamic upset them. That is great precision, great dynamics, overview and at volumes that one would not normally listen to at all - with the Auditorium they become a thoroughly pleasant experience."

Conclusiones de la revista Klang+Ton:

"Nothing less than a statement of what is possible when it comes to large monitors."

Nuestro kit de montaje se compone de

  • 4x Wavecor PR275BD01 Passive Radiator, die cast alu, mica/paper laminated cone, incl. 3 detachable weights
  • 2x Wavecor Subwoofer SW275BD01, die cast alu, mica/paper laminated cone, 4 ohm
  • Hypex FusionAmp FA501
  • 6x Damping Sonofil 100 x 35 cm for 20 litres
  • 2m Speaker cable 2x2.5 mm2 black/red
  • Pan screws 4x20 black, torx, 8 pieces
  • 6x Allen wood screws, black, 5x30 mm, 8 pieces
  • Plan for DIY kit

Kit sin la caja, precio por altavoz   EUR 3229,00 sin IVA: € 2713.45 / $ 2930.52

El precio de un par de altavoces personalizados con el color deseado.  - No disponible (_)

Atrás   Vista general de las recomendaciones para construcción de la Revista Klang und Ton