ScanSpeak

Founded in 1970, Scan-Speak still resides at its original address in Videbaek, Denmark. Located in the heart of the Jutland peninsula, the acoustic engineers adhere to the legendary policy of "Never compromise".

To our building proposals with ScanSpeak drivers.

speakers for your car-HiFi

open a bigger photo

ScanSpeak R1904/613001

order no. ss-R1904-613001

EUR 62,00 excl. VAT: € 52.10 / $ 55.23

19 mm tweeter with fabric cone.

power handling (continuous/programme) = 40 W
frequency range = 2500-30000 Hz
resonance frequency fs = 1000 Hz
impedance R = 4 Ohm
sound pressure level SPL = 87 dB (2,83V; 1m)
DC resistance Re = 2,7 Ohm
force factor BL = 1,4 N/A
effective piston radiating area Sd = 3,8 cm²
effective mechanical mass incl. air load mms = 0,23 g
equivalent volume of compliance Vas = 0,002 l
total Q factor Qts = 1,61 (Qms=8,03, Qes=2,02)
voice coil diameter = 19 mm
maximum peak linear excursion vibration x_lin = +/- 0,1 mm
mounting diameter d = 39 mm
overall diameter d = 42 mm
mounting depth (not countersunk) t = 26 mm

PDF data sheet

show kits to this chassis hide kits

open a bigger photo

recommended cabinet 1:
closed cabinet with 8,7 L volume
from 91/57 Hz (-3dB/-8dB)

recommended cabinet 2:
36 L volume bass reflex cabinet
with HP70 reflex tube, 9 cm long.
from 42/35 Hz (-3dB/-8dB).

ScanSpeak 16W/4434G00

order no. ss-16W-4434G00

EUR 129,00 excl. VAT: € 108.40 / $ 114.91

15 cm bass driver with glass fibre cone.

power handling (continuous/programme) = 40 W
frequency range = 50-1500 Hz
resonance frequency fs = 55 Hz
impedance R = 4 Ohm
sound pressure level SPL = 90,5 dB (2,83V; 1m)
DC resistance Re = 3 Ohm
force factor BL = 4,8 N/A
effective piston radiating area Sd = 138 cm²
effective mechanical mass incl. air load mms = 12,5 g
equivalent volume of compliance Vas = 17,9 l
total Q factor Qts = 0,47 (Qms=3,06, Qes=0,56)
voice coil diameter = 32 mm
maximum peak linear excursion vibration x_lin = +/- 4 mm
mounting diameter d = 141 mm
overall diameter d = 165,5 mm
mounting depth (not countersunk) t = 66,3 mm

PDF data sheet

show kits to this chassis hide kits

The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.