Beyma

Beyma is a well known producer of speaker in Sevilla, Spain.

To our building proposals with Beyma drivers.


 

Tweeter

Beyma CP09  

order no. by-cp09

EUR 56,54 excl. VAT: € 47.51 / $ 53.21

26 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 15 W
  • frequency range = 2000-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 104 dB (2,83V; 1m)
  • DC resistance Re = 5 Ohm
  • force factor BL = 4 N/A
  • voice coil diameter = 26 mm
  • mounting diameter d = 90x71 mm
  • overall diameter d = 98x92 mm
  • mounting depth (not countersunk) t = 96 mm
  • mass m = 0,75 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP12/N  

order no. by-cp12n

EUR 48,64 excl. VAT: € 40.87 / $ 45.78

25,8 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 15 W
  • frequency range = 3000-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 107 dB (2,83V; 1m)
  • DC resistance Re = 5 Ohm
  • force factor BL = 4 N/A
  • voice coil diameter = 25,8 mm
  • mounting diameter d = 74 mm
  • overall diameter d = 87x87 mm
  • mounting depth (not countersunk) t = 72 mm
  • mass m = 0,75 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP16  

order no. by-cp16

EUR 48,64 excl. VAT: € 40.87 / $ 45.78

25,8 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 15 W
  • frequency range = 3000-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 105 dB (2,83V; 1m)
  • DC resistance Re = 7,3 Ohm
  • force factor BL = 4 N/A
  • voice coil diameter = 25,8 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 86x86 mm
  • mounting depth (not countersunk) t = 65 mm
  • mass m = 0,8 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP21/F  

order no. by-cp21f

EUR 106,25 excl. VAT: € 89.29 / $ 100.00

37,6 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 25/50 W
  • frequency range = 3500-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 105 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 5,2 N/A
  • voice coil diameter = 37,6 mm
  • mounting diameter d = 92 mm
  • overall diameter d = 102x102 mm
  • mounting depth (not countersunk) t = 72 mm
  • mass m = 1,7 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP22  

order no. by-cp22

EUR 102,35 excl. VAT: € 86.01 / $ 96.33

37,6 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 25 W
  • frequency range = 4000-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 107 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 5,2 N/A
  • voice coil diameter = 37,6 mm
  • mounting diameter d = 92 mm
  • overall diameter d = 102x102 mm
  • mounting depth (not countersunk) t = 71 mm
  • mass m = 1,6 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SMC8060  

order no. by-smc8060

EUR 106,25 excl. VAT: € 89.29 / $ 100.00

44,4 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 50/100 W
  • frequency range = 800-18000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 107 dB (2,83V; 1m)
  • DC resistance Re = 4,4 Ohm
  • force factor BL = 8,5 N/A
  • voice coil diameter = 44,4 mm
  • mounting diameter d = 130x115 mm
  • overall diameter d = 140x136 mm
  • mounting depth (not countersunk) t = 121 mm
  • mass m = 1,5 kg
PDF data sheet

show kits to this chassis hide kits


 

Air Motion Transformer

Beyma TPL150B  

order no. by-tpl150

EUR 535,16 excl. VAT: € 449.71 / $ 503.68

air motion transformer.

  • power handling (continuous/programme) = 80/160 W
  • frequency range = 1000-23000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • overall diameter d = 160x130 mm
  • mounting depth (not countersunk) t = 68,4 mm
  • mass m = 2,08 kg
PDF data sheet

show kits to this chassis hide kits

Beyma TPL150S  

order no. by-tpl150s

EUR 541,59 excl. VAT: € 455.12 / $ 509.73

air motion transformer.

  • power handling (continuous/programme) = 80/160 W
  • frequency range = 1000-23000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • overall diameter d = 160x130 mm
  • mounting depth (not countersunk) t = 68,4 mm
  • mass m = 2,08 kg
PDF data sheet

show kits to this chassis hide kits

Beyma TPL150H  

order no. by-tpl150h

EUR 613,14 excl. VAT: € 515.24 / $ 577.07

air motion transformer.

  • power handling (continuous/programme) = 80/160 W
  • frequency range = 700-23000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 102 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • overall diameter d = 230x230 mm
  • mounting depth (not countersunk) t = 148 mm
  • mass m = 2,9 kg
PDF data sheet

show kits to this chassis hide kits

Beyma TPL200B  

order no. by-tpl200b

EUR 617,72 excl. VAT: € 519.09 / $ 581.38

air motion transformer.

  • power handling (continuous/programme) = 120/240 W
  • frequency range = 1000-23000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 101 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • overall diameter d = 160x130 mm
  • mounting depth (not countersunk) t = 72,4 mm
  • mass m = 2,75 kg
PDF data sheet

show kits to this chassis hide kits

Beyma TPL200S  

order no. by-tpl200s

EUR 617,72 excl. VAT: € 519.09 / $ 581.38

air motion transformer.

  • power handling (continuous/programme) = 120/240 W
  • frequency range = 1000-23000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 101 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • overall diameter d = 160x130 mm
  • mounting depth (not countersunk) t = 72,4 mm
  • mass m = 2,75 kg
PDF data sheet

show kits to this chassis hide kits

Beyma TPL200H  

order no. by-tpl200h

EUR 674,85 excl. VAT: € 567.10 / $ 635.15

air motion transformer.

  • power handling (continuous/programme) = 120/240 W
  • frequency range = 1000-23000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 104 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • overall diameter d = 230x230 mm
  • mounting depth (not countersunk) t = 152 mm
  • mass m = 3,55 kg
PDF data sheet

show kits to this chassis hide kits


 

Compression driver for Horns

Beyma WL3  

order no. by-wl3

EUR 213,48 excl. VAT: € 179.39 / $ 200.92

. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 40/80 W
  • frequency range = 700-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 105 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 8 N/A
  • voice coil diameter = 44,4 mm
  • overall diameter d = 80 mm
  • mounting depth (not countersunk) t = 142 mm
  • mass m = 1 kg
PDF data sheet

show kits to this chassis hide kits

Beyma WL4  

order no. by-wl4

EUR 223,23 excl. VAT: € 187.59 / $ 210.10

. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 40/80 W
  • frequency range = 700-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 105 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 8 N/A
  • voice coil diameter = 44,4 mm
  • overall diameter d = 80 mm
  • mounting depth (not countersunk) t = 195 mm
  • mass m = 1,1 kg
PDF data sheet

show kits to this chassis hide kits

Beyma WL4FE  

order no. by-wl4fe

EUR 135,50 excl. VAT: € 113.87 / $ 127.53

.

  • power handling (continuous/programme) = 70/140 W
  • frequency range = 700-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 104 dB (2,83V; 1m)
  • DC resistance Re = 4,3 Ohm
  • force factor BL = 6,6 N/A
  • voice coil diameter = 44,4 mm
  • overall diameter d = 100 mm
  • mounting depth (not countersunk) t = 200 mm
  • mass m = 1,81 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CD10FE  

order no. by-cd10fe

EUR 77,01 excl. VAT: € 64.71 / $ 72.48

.

  • power handling (continuous/programme) = 70/140 W
  • frequency range = 700-19000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 109 dB (2,83V; 1m)
  • DC resistance Re = 4,3 Ohm
  • force factor BL = 6,6 N/A
  • voice coil diameter = 44,4 mm
  • overall diameter d = 102 mm
  • mounting depth (not countersunk) t = 62 mm
  • mass m = 1,3 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CD10ND  

order no. by-cd10nd

EUR 164,74 excl. VAT: € 138.44 / $ 155.05

. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 70/140 W
  • frequency range = 700-19000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 111 dB (2,83V; 1m)
  • DC resistance Re = 4,3 Ohm
  • force factor BL = 8,9 N/A
  • voice coil diameter = 44,4 mm
  • overall diameter d = 100 mm
  • mounting depth (not countersunk) t = 66,4 mm
  • mass m = 1,2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SMC225ND

Beyma SMC225ND  

order no. by-smc225nd

EUR 141,34 excl. VAT: € 118.77 / $ 133.03

. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 40/80 W
  • frequency range = 800-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 108 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 8 N/A
  • voice coil diameter = 44,4 mm
  • overall diameter d = 80 mm
  • mounting depth (not countersunk) t = 57 mm
  • mass m = 0,7 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP380M  

order no. by-cp380m

EUR 174,49 excl. VAT: € 146.63 / $ 164.23

. The voice coil is made of kapton.

  • power handling (continuous/programme) = 70/140 W
  • frequency range = 800-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 107 dB (2,83V; 1m)
  • DC resistance Re = 4,7 Ohm
  • force factor BL = 7 N/A
  • voice coil diameter = 44 mm
  • overall diameter d = 146,5 mm
  • mounting depth (not countersunk) t = 75 mm
  • mass m = 3,25 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP385ND  

order no. by-cp385nd

EUR 223,23 excl. VAT: € 187.59 / $ 210.10

. The voice coil is made of kapton. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 70/140 W
  • frequency range = 800-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 107 dB (2,83V; 1m)
  • DC resistance Re = 4,7 Ohm
  • force factor BL = 7,5 N/A
  • voice coil diameter = 44 mm
  • overall diameter d = 100 mm
  • mounting depth (not countersunk) t = 80 mm
  • mass m = 1,35 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SMC280ST

Beyma SMC280ST  

order no. by-smc280st

EUR 86,76 excl. VAT: € 72.91 / $ 81.66

.

  • power handling (continuous/programme) = 50/100 W
  • frequency range = 800-18000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 105 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 8,5 N/A
  • voice coil diameter = 44,4 mm
  • overall diameter d = 102 mm
  • mounting depth (not countersunk) t = 53 mm
  • mass m = 1,3 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SMC1050N

Beyma SMC1050N  

order no. by-smc1050n

EUR 114,05 excl. VAT: € 95.84 / $ 107.34

.

  • power handling (continuous/programme) = 60/120 W
  • frequency range = 800-18000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 108 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 9,3 N/A
  • voice coil diameter = 44,4 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 61 mm
  • mass m = 2,2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma WL5

Beyma WL5  

order no. by-wl5

EUR 418,18 excl. VAT: € 351.41 / $ 393.58

1.4 inch high frequency compression driver with titanium cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 70/140 W
  • frequency range = 600-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 108 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 11 N/A
  • voice coil diameter = 72,2 mm
  • overall diameter d = 123 mm
  • mounting depth (not countersunk) t = 271 mm
  • mass m = 2,62 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CD1014ND  

order no. by-cd1014nd

EUR 174,49 excl. VAT: € 146.63 / $ 164.23

. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 70/140 W
  • frequency range = 700-19000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 110 dB (2,83V; 1m)
  • DC resistance Re = 4,3 Ohm
  • force factor BL = 6,6 N/A
  • voice coil diameter = 44,4 mm
  • overall diameter d = 115 mm
  • mounting depth (not countersunk) t = 76 mm
  • mass m = 1,51 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CD1014FE  

order no. by-cd1014fe

EUR 114,05 excl. VAT: € 95.84 / $ 107.34

.

  • power handling (continuous/programme) = 70/140 W
  • frequency range = 700-19000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 110 dB (2,83V; 1m)
  • DC resistance Re = 4,3 Ohm
  • force factor BL = 6,6 N/A
  • voice coil diameter = 44,4 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 65 mm
  • mass m = 2,04 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SMC65  

order no. by-smc65

EUR 193,98 excl. VAT: € 163.01 / $ 182.57

1.4 inch high frequency compression driver with titanium cone.

  • power handling (continuous/programme) = 50/100 W
  • frequency range = 700-18000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 107 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 8,8 N/A
  • voice coil diameter = 72,2 mm
  • overall diameter d = 156 mm
  • mounting depth (not countersunk) t = 64 mm
  • mass m = 4,2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SMC65ND

Beyma SMC65ND  

order no. by-smc65nd

EUR 301,21 excl. VAT: € 253.12 / $ 283.49

1.4 inch high frequency compression driver with titanium cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 70/140 W
  • frequency range = 600-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 108 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 10 N/A
  • voice coil diameter = 72,2 mm
  • overall diameter d = 123 mm
  • mounting depth (not countersunk) t = 53,5 mm
  • mass m = 2,2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP755TI

Beyma CP755TI  

order no. by-cp755ti

EUR 271,97 excl. VAT: € 228.55 / $ 255.97

1.4 inch high frequency compression driver with titanium cone.

  • power handling (continuous/programme) = 70/140 W
  • frequency range = 600-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 110 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 10 N/A
  • voice coil diameter = 72,2 mm
  • overall diameter d = 192 mm
  • mounting depth (not countersunk) t = 78 mm
  • mass m = 6,75 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP755ND

Beyma CP755ND  

order no. by-cp755nd

EUR 466,92 excl. VAT: € 392.37 / $ 439.45

1.4 inch high frequency compression driver with titanium cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 80/160 W
  • frequency range = 600-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 112 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 11,5 N/A
  • voice coil diameter = 72,2 mm
  • overall diameter d = 145 mm
  • mounting depth (not countersunk) t = 65 mm
  • mass m = 2,96 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP755NDAL

Beyma CP755NDAL  

order no. by-cp755ndal

EUR 466,92 excl. VAT: € 392.37 / $ 439.45

1.4 inch high frequency compression driver with aluminium cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 80/160 W
  • frequency range = 600-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 112 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 11,5 N/A
  • voice coil diameter = 72,2 mm
  • overall diameter d = 145 mm
  • mounting depth (not countersunk) t = 65 mm
  • mass m = 2,96 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP855ND  

order no. by-cp855nd

EUR 525,41 excl. VAT: € 441.52 / $ 494.50

1.4 inch high frequency compression driver with titanium cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 150/300 W
  • frequency range = 500-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 112 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 16,5 N/A
  • voice coil diameter = 100 mm
  • overall diameter d = 160 mm
  • mounting depth (not countersunk) t = 80 mm
  • mass m = 4,3 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SMC60

Beyma SMC60  

order no. by-smc60

EUR 223,23 excl. VAT: € 187.59 / $ 210.10

2 inch high frequency compression driver with titanium cone.

  • power handling (continuous/programme) = 80/160 W
  • frequency range = 500-18000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 109 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 8,8 N/A
  • voice coil diameter = 72,2 mm
  • overall diameter d = 156 mm
  • mounting depth (not countersunk) t = 75 mm
  • mass m = 4,5 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP750ND

Beyma CP750ND  

order no. by-cp750nd

EUR 476,67 excl. VAT: € 400.56 / $ 448.63

2 inch high frequency compression driver with titanium cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 80/160 W
  • frequency range = 600-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 112 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 11,5 N/A
  • voice coil diameter = 72,2 mm
  • overall diameter d = 145 mm
  • mounting depth (not countersunk) t = 89 mm
  • mass m = 3,5 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP750TI

Beyma CP750TI  

order no. by-cp750ti

EUR 291,46 excl. VAT: € 244.92 / $ 274.32

2 inch high frequency compression driver with titanium cone.

  • power handling (continuous/programme) = 90/180 W
  • frequency range = 600-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 110 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 10 N/A
  • voice coil diameter = 72,2 mm
  • overall diameter d = 192 mm
  • mounting depth (not countersunk) t = 88 mm
  • mass m = 7,05 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP800/TI  

order no. by-cp800ti

EUR 427,93 excl. VAT: € 359.61 / $ 402.76

.

  • power handling (continuous/programme) = 130/260 W
  • frequency range = 500-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 112 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 15 N/A
  • voice coil diameter = 100 mm
  • overall diameter d = 228 mm
  • mounting depth (not countersunk) t = 117 mm
  • mass m = 10,3 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP850ND  

order no. by-cp850nd

EUR 661,88 excl. VAT: € 556.20 / $ 622.95

2 inch high frequency compression driver with titanium cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 130/260 W
  • frequency range = 500-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 112 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 16,5 N/A
  • voice coil diameter = 100 mm
  • overall diameter d = 165 mm
  • mounting depth (not countersunk) t = 114 mm
  • mass m = 4,4 kg
PDF data sheet

show kits to this chassis hide kits


 

Horn

Beyma TD164  

order no. by-td164

EUR 67,26 excl. VAT: € 56.52 / $ 63.30

Horn for a compression driver with 1 inch throat.

  • Throat diameter = 1 inch
  • nominal angle (HxV) = 60 x 40 Deg
  • Cut off frequency : 1200 Hz
  • over all dimensions (HxWxD) = 202 x 202 x145 mm
  • baffle cutout dimensions (HxW) = 177 x 177 mm
  • net weight = 1 kg
  • material: aluminium
PDF data sheet

show kits to this chassis hide kits

Beyma TD194  

order no. by-td194

EUR 67,26 excl. VAT: € 56.52 / $ 63.30

Horn for a compression driver with 1 inch throat.

  • Throat diameter = 1 inch
  • nominal angle (HxV) = 90 x 40 Deg
  • Cut off frequency : 1200 Hz
  • over all dimensions (HxWxD) = 202 x 202 x145 mm
  • baffle cutout dimensions (HxW) = 177 x 177 mm
  • net weight = 1 kg
  • material: aluminium
PDF data sheet

show kits to this chassis hide kits

Beyma TD365  

order no. by-td365

EUR 86,76 excl. VAT: € 72.91 / $ 81.66

Horn for a compression driver with 1,4 inch throat.

  • Throat diameter = 1,4 inch
  • nominal angle (HxV) = 60 x 50 Deg
  • Cut off frequency : 800 Hz
  • over all dimensions (HxWxD) = 235 x 235 x 121 mm
  • baffle cutout dimensions (HxW) = 202 x 204 mm
  • net weight = 1,2 kg
  • material: aluminium
PDF data sheet

show kits to this chassis hide kits

Beyma TD385  

order no. by-td385

EUR 86,76 excl. VAT: € 72.91 / $ 81.66

Horn for a compression driver with 1,4 inch throat.

  • Throat diameter = 1,4 inch
  • nominal angle (HxV) = 80 x 50 Deg
  • Cut off frequency : 800 Hz
  • over all dimensions (HxWxD) = 235 x 235 x 120 mm
  • baffle cutout dimensions (HxW) = 202 x 204 mm
  • net weight = 1,2 kg
  • material: aluminium
PDF data sheet

show kits to this chassis hide kits

Beyma TD460N  

order no. by-td460n

EUR 203,73 excl. VAT: € 171.20 / $ 191.75

Horn for a compression driver with 2 inch throat.

  • Throat diameter = 2 inch
  • nominal angle (HxV) = 60 x 40 Deg
  • Cut off frequency : 800 Hz
  • over all dimensions (HxWxD) = 270 x 420 x 227 mm
  • baffle cutout dimensions (HxW) = 235 x 365 mm
  • net weight = 2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma TDWL4  

order no. by-tdwl4

EUR 106,25 excl. VAT: € 89.29 / $ 100.00

Horn for a compression driver with 0,47 x 8,19 inch throat.

  • Throat diameter = 0,47 x 8,19 inch
  • nominal angle (HxV) = 90 x 20 Deg
  • Cut off frequency : 800 Hz
  • over all dimensions (HxWxD) = 250 x 210 x 147 mm
  • baffle cutout dimensions (HxW) = 247 x 174 mm
  • net weight = 1,5 kg
  • material: aluminium
PDF data sheet

show kits to this chassis hide kits


 

Mids

Beyma 6Mi90
open a bigger photo

recommended cabinet 1:
closed cabinet with 2,5 L volume
from 220/139 Hz (-3dB/-8dB)

recommended cabinet 2:
9,8 L volume bass reflex cabinet
with HP70 reflex tube, 4 cm long.
from 106/87 Hz (-3dB/-8dB).

Beyma 6Mi90  

order no. by-6mi90

EUR 80,91 excl. VAT: € 67.99 / $ 76.15

16 cm midrange driver with paper cone.

  • power handling (continuous/programme) = 125/250 W
  • frequency range = 150-8000 Hz
  • resonance frequency fs = 120 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 9,6 N/A
  • voice coil inductance L = 0,5 mH
  • effective piston radiating area Sd = 140 cm2
  • effective mechanical mass incl. air load mms = 9 g
  • equivalent volume of compliance Vas = 7 l
  • total Q factor Qts = 0,44 (Qms=6,8, Qes=0,47)
  • voice coil diameter = 38,5 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 146 mm
  • overall diameter d = 174 mm
  • mounting depth (not countersunk) t = 85 mm
  • mass m = 2,25 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 605ND

recommended cabinet 1:
closed cabinet with 0,45 L volume
from 386/244 Hz (-3dB/-8dB)

recommended cabinet 2:
1,3 L volume bass reflex cabinet
with HP50 reflex tube, 7 cm long.
from 211/163 Hz (-3dB/-8dB).

Beyma 605ND  

order no. by-605nd

EUR 160,84 excl. VAT: € 135.16 / $ 151.38

16 cm midrange driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 125/250 W
  • frequency range = 150-8000 Hz
  • resonance frequency fs = 150 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 13,15 N/A
  • voice coil inductance L = 0,5 mH
  • effective piston radiating area Sd = 140 cm2
  • effective mechanical mass incl. air load mms = 10 g
  • equivalent volume of compliance Vas = 3 l
  • total Q factor Qts = 0,31 (Qms=9,68, Qes=0,32)
  • voice coil diameter = 38,5 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 148 mm
  • overall diameter d = 174 mm
  • mounting depth (not countersunk) t = 67 mm
  • mass m = 1,5 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 6MI100

recommended cabinet 1:
closed cabinet with 0,86 L volume
from 242/153 Hz (-3dB/-8dB)

recommended cabinet 2:
2,8 L volume bass reflex cabinet
with HP50 reflex tube, 10 cm long.
from 129/100 Hz (-3dB/-8dB).

Beyma 6MI100  

order no. by-6mi100

EUR 96,50 excl. VAT: € 81.09 / $ 90.82

16 cm midrange driver with paper cone.

  • power handling (continuous/programme) = 250/500 W
  • frequency range = 150-6000 Hz
  • resonance frequency fs = 100 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,3 Ohm
  • force factor BL = 11,6 N/A
  • voice coil inductance L = 0,6 mH
  • effective piston radiating area Sd = 140 cm2
  • effective mechanical mass incl. air load mms = 14 g
  • equivalent volume of compliance Vas = 5 l
  • total Q factor Qts = 0,29 (Qms=1,9, Qes=0,4)
  • voice coil diameter = 51,7 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 146 mm
  • overall diameter d = 174 mm
  • mounting depth (not countersunk) t = 85 mm
  • mass m = 2,2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 8MI100
open a bigger photo

recommended cabinet 1:
closed cabinet with 10,7 L volume
from 128/81 Hz (-3dB/-8dB)

recommended cabinet 2:
42 L volume bass reflex cabinet
with HP100 reflex tube, 5 cm long.
from 57/50 Hz (-3dB/-8dB).

Beyma 8MI100  

order no. by-8mi100

EUR 102,35 excl. VAT: € 86.01 / $ 96.33

20 cm midrange driver with paper cone.

  • power handling (continuous/programme) = 250/500 W
  • frequency range = 150-7000 Hz
  • resonance frequency fs = 90 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 9,8 N/A
  • voice coil inductance L = 0,2 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 17 g
  • equivalent volume of compliance Vas = 13 l
  • total Q factor Qts = 0,56 (Qms=8,5, Qes=0,6)
  • voice coil diameter = 51,7 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 181 mm
  • overall diameter d = 212 mm
  • mounting depth (not countersunk) t = 94 mm
  • mass m = 3,1 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 10MI100
open a bigger photo

recommended cabinet 1:
closed cabinet with 1,8 L volume
from 282/178 Hz (-3dB/-8dB)

recommended cabinet 2:
4,5 L volume bass reflex cabinet
with HP70 reflex tube, 7 cm long.
from 168/126 Hz (-3dB/-8dB).

Beyma 10MI100  

order no. by-10mi100

EUR 184,24 excl. VAT: € 154.82 / $ 173.40

24 cm midrange driver with paper cone.

  • power handling (continuous/programme) = 350/700 W
  • frequency range = 70-4000 Hz
  • resonance frequency fs = 89 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 101 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 21,6 N/A
  • voice coil inductance L = 0,8 mH
  • effective piston radiating area Sd = 380 cm2
  • effective mechanical mass incl. air load mms = 34 g
  • equivalent volume of compliance Vas = 20 l
  • total Q factor Qts = 0,25 (Qms=7,2, Qes=0,26)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 228 mm
  • overall diameter d = 260,5 mm
  • mounting depth (not countersunk) t = 120 mm
  • mass m = 7,1 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12MI100
open a bigger photo

recommended cabinet 1:
closed cabinet with 4,5 L volume
from 208/131 Hz (-3dB/-8dB)

recommended cabinet 2:
9,6 L volume bass reflex cabinet
with HP100 reflex tube, 15 cm long.
from 131/98 Hz (-3dB/-8dB).

Beyma 12MI100  

order no. by-12mi100

EUR 193,98 excl. VAT: € 163.01 / $ 182.57

30 cm midrange driver with paper cone.

  • power handling (continuous/programme) = 450/900 W
  • frequency range = 40-4000 Hz
  • resonance frequency fs = 58 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 21,6 N/A
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 530 cm2
  • effective mechanical mass incl. air load mms = 47 g
  • equivalent volume of compliance Vas = 64 l
  • total Q factor Qts = 0,22 (Qms=5,54, Qes=0,23)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 277,5 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 139 mm
  • mass m = 7,2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15MI100
open a bigger photo

recommended cabinet 1:
closed cabinet with 21 L volume
from 132/83 Hz (-3dB/-8dB)

recommended cabinet 2:
60 L volume bass reflex cabinet
with 2x HP100 reflex tube, 7 cm long.
from 74/56 Hz (-3dB/-8dB).

Beyma 15MI100  

order no. by-15mi100

EUR 213,48 excl. VAT: € 179.39 / $ 200.92

34 cm midrange driver with paper cone.

  • power handling (continuous/programme) = 450/900 W
  • frequency range = 30-4000 Hz
  • resonance frequency fs = 48 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 101 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 21,6 N/A
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 72 g
  • equivalent volume of compliance Vas = 166 l
  • total Q factor Qts = 0,28 (Qms=6,38, Qes=0,3)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 252 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 163 mm
  • mass m = 7,8 kg
PDF data sheet

show kits to this chassis hide kits


 

Bass-Shaker

Beyma SK07  

order no. by-sk07

EUR 174,49 excl. VAT: € 146.63 / $ 164.23

bass shaker. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 50/100 W
  • frequency range = 20-100 Hz
  • impedance R = 16 Ohm
  • overall diameter d = 156 mm
  • mounting depth (not countersunk) t = 64 mm
  • mass m = 1,5 kg
PDF data sheet

show kits to this chassis hide kits


 

Woofer

Beyma 5P200FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 1 L volume
from 170/107 Hz (-3dB/-8dB)

recommended cabinet 2:
3,5 L volume bass reflex cabinet
with HP50 reflex tube, 18 cm long.
from 89/70 Hz (-3dB/-8dB).

Beyma 5P200FE  

order no. by-5p200fe

EUR 86,76 excl. VAT: € 72.91 / $ 81.66

14 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 150/300 W
  • frequency range = 70-10000 Hz
  • resonance frequency fs = 72 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 8,5 N/A
  • voice coil inductance L = 0,6 mH
  • effective piston radiating area Sd = 95 cm2
  • effective mechanical mass incl. air load mms = 10 g
  • equivalent volume of compliance Vas = 5,69 l
  • total Q factor Qts = 0,33 (Qms=7,5, Qes=0,35)
  • voice coil diameter = 38 mm
  • maximum peak linear excursion vibration xlin = +/- 5,7 mm
  • mounting diameter d = 122 mm
  • overall diameter d = 155 mm
  • mounting depth (not countersunk) t = 78,9 mm
  • mass m = 2,19 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 5G40ND

recommended cabinet 1:
closed cabinet with 0,46 L volume
from 283/179 Hz (-3dB/-8dB)

recommended cabinet 2:
1,4 L volume bass reflex cabinet
with HP50 reflex tube, 15 cm long.
from 155/119 Hz (-3dB/-8dB).

Beyma 5G40ND  

order no. by-5g40nd

EUR 121,85 excl. VAT: € 102.39 / $ 114.68

14 cm bass driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 100/200 W
  • frequency range = 90-17000 Hz
  • resonance frequency fs = 110 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 93 dB (2,83V; 1m)
  • DC resistance Re = 6,9 Ohm
  • force factor BL = 10 N/A
  • voice coil inductance L = 0,4 mH
  • effective piston radiating area Sd = 85 cm2
  • effective mechanical mass incl. air load mms = 7 g
  • equivalent volume of compliance Vas = 3,1 l
  • total Q factor Qts = 0,31 (Qms=4,9, Qes=0,33)
  • voice coil diameter = 38,5 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 120 mm
  • overall diameter d = 155 mm
  • mounting depth (not countersunk) t = 73,5 mm
  • mass m = 1,3 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 6P200FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 1,4 L volume
from 167/106 Hz (-3dB/-8dB)

recommended cabinet 2:
4,1 L volume bass reflex cabinet
with HP50 reflex tube, 15 cm long.
from 91/70 Hz (-3dB/-8dB).

Beyma 6P200FE  

order no. by-6p200fe

EUR 112,10 excl. VAT: € 94.20 / $ 105.51

15 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 200/400 W
  • frequency range = 60-9000 Hz
  • resonance frequency fs = 65 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92,7 dB (2,83V; 1m)
  • DC resistance Re = 5 Ohm
  • force factor BL = 10,1 N/A
  • voice coil inductance L = 0,6 mH
  • effective piston radiating area Sd = 135 cm2
  • effective mechanical mass incl. air load mms = 17 g
  • equivalent volume of compliance Vas = 9,13 l
  • total Q factor Qts = 0,31 (Qms=3,58, Qes=0,34)
  • voice coil diameter = 51,7 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 145,3 mm
  • overall diameter d = 162,5 mm
  • mounting depth (not countersunk) t = 86,5 mm
  • mass m = 3,1 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 6P200ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 1,5 L volume
from 154/97 Hz (-3dB/-8dB)

recommended cabinet 2:
4,3 L volume bass reflex cabinet
with HP50 reflex tube, 17 cm long.
from 86/66 Hz (-3dB/-8dB).

Beyma 6P200ND  

order no. by-6p200nd

EUR 154,99 excl. VAT: € 130.24 / $ 145.87

15 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 200/400 W
  • frequency range = 60-9000 Hz
  • resonance frequency fs = 56 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 5,3 Ohm
  • force factor BL = 10,5 N/A
  • voice coil inductance L = 0,6 mH
  • effective piston radiating area Sd = 135 cm2
  • effective mechanical mass incl. air load mms = 17 g
  • equivalent volume of compliance Vas = 11,9 l
  • total Q factor Qts = 0,29 (Qms=3,69, Qes=0,32)
  • voice coil diameter = 51,7 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 145,3 mm
  • overall diameter d = 162,5 mm
  • mounting depth (not countersunk) t = 78 mm
  • mass m = 1,9 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 6G40FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 1,5 L volume
from 200/126 Hz (-3dB/-8dB)

recommended cabinet 2:
5,6 L volume bass reflex cabinet
with HP70 reflex tube, 13 cm long.
from 99/80 Hz (-3dB/-8dB).

Beyma 6G40FE  

order no. by-6g40fe

EUR 96,50 excl. VAT: € 81.09 / $ 90.82

17 cm bass driver with paper cone.

  • power handling (continuous/programme) = 170/340 W
  • frequency range = 70-9000 Hz
  • resonance frequency fs = 102 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94,3 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 11 N/A
  • voice coil inductance L = 0,5 mH
  • effective piston radiating area Sd = 140 cm2
  • effective mechanical mass incl. air load mms = 13 g
  • equivalent volume of compliance Vas = 5,04 l
  • total Q factor Qts = 0,4 (Qms=9,25, Qes=0,42)
  • voice coil diameter = 51,7 mm
  • maximum peak linear excursion vibration xlin = +/- 1,1 mm
  • mounting diameter d = 146 mm
  • overall diameter d = 187,5 mm
  • mounting depth (not countersunk) t = 81,5 mm
  • mass m = 3,02 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 6G40ND

recommended cabinet 1:
closed cabinet with 1,2 L volume
from 213/135 Hz (-3dB/-8dB)

recommended cabinet 2:
4 L volume bass reflex cabinet
with HP50 reflex tube, 8 cm long.
from 114/88 Hz (-3dB/-8dB).

Beyma 6G40ND  

order no. by-6g40nd

EUR 135,50 excl. VAT: € 113.87 / $ 127.53

17 cm bass driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 170/340 W
  • frequency range = 70-9000 Hz
  • resonance frequency fs = 88 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 11 N/A
  • voice coil inductance L = 0,6 mH
  • effective piston radiating area Sd = 140 cm2
  • effective mechanical mass incl. air load mms = 12 g
  • equivalent volume of compliance Vas = 7,2 l
  • total Q factor Qts = 0,33 (Qms=9,1, Qes=0,34)
  • voice coil diameter = 51,7 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 146 mm
  • overall diameter d = 187,5 mm
  • mounting depth (not countersunk) t = 75,5 mm
  • mass m = 1,7 kg
PDF data sheet

show kits to this chassis hide kits


 

8 inch woofer

Beyma SM108

recommended cabinet 1:
closed cabinet with 3,6 L volume
from 150/94 Hz (-3dB/-8dB)

recommended cabinet 2:
12,8 L volume bass reflex cabinet
with HP70 reflex tube, 9 cm long.
from 76/61 Hz (-3dB/-8dB).

Beyma SM108  

order no. by-sm108

EUR 88,71 excl. VAT: € 74.55 / $ 83.49

20 cm bass driver with paper cone.

  • power handling (continuous/programme) = 150/300 W
  • frequency range = 65-6000 Hz
  • resonance frequency fs = 69 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 13 N/A
  • voice coil inductance L = 1,5 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 24 g
  • equivalent volume of compliance Vas = 16 l
  • total Q factor Qts = 0,37 (Qms=7,01, Qes=0,39)
  • voice coil diameter = 51,7 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 181 mm
  • overall diameter d = 212 mm
  • mounting depth (not countersunk) t = 94 mm
  • mass m = 3,1 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 8P300FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,7 L volume
from 148/93 Hz (-3dB/-8dB)

recommended cabinet 2:
11,8 L volume bass reflex cabinet
with HP70 reflex tube, 11 cm long.
from 79/61 Hz (-3dB/-8dB).

Beyma 8P300FE  

order no. by-8p300fe

EUR 135,50 excl. VAT: € 113.87 / $ 127.53

20 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 300/600 W
  • frequency range = 50-8000 Hz
  • resonance frequency fs = 61 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95,4 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 11 N/A
  • voice coil inductance L = 0,8 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 22 g
  • equivalent volume of compliance Vas = 21,49 l
  • total Q factor Qts = 0,33 (Qms=9,54, Qes=0,34)
  • voice coil diameter = 62,4 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 182,5 mm
  • overall diameter d = 211,5 mm
  • mounting depth (not countersunk) t = 97,5 mm
  • mass m = 4,03 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 8LW30

recommended cabinet 1:
closed cabinet with 3,6 L volume
from 152/96 Hz (-3dB/-8dB)

recommended cabinet 2:
12,8 L volume bass reflex cabinet
with HP100 reflex tube, 23 cm long.
from 78/61 Hz (-3dB/-8dB).

Beyma 8LW30  

order no. by-8lw30

EUR 164,74 excl. VAT: € 138.44 / $ 155.05

20 cm bass driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 250/500 W
  • frequency range = 65-6000 Hz
  • resonance frequency fs = 70 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 12 N/A
  • voice coil inductance L = 1,1 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 22 g
  • equivalent volume of compliance Vas = 16 l
  • total Q factor Qts = 0,37 (Qms=7, Qes=0,39)
  • voice coil diameter = 62,4 mm
  • maximum peak linear excursion vibration xlin = +/- 4,5 mm
  • mounting diameter d = 181 mm
  • overall diameter d = 212 mm
  • mounting depth (not countersunk) t = 96 mm
  • mass m = 2,35 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 8G40

recommended cabinet 1:
closed cabinet with 3,6 L volume
from 156/98 Hz (-3dB/-8dB)

recommended cabinet 2:
12,4 L volume bass reflex cabinet
with HP100 reflex tube, 22 cm long.
from 80/63 Hz (-3dB/-8dB).

Beyma 8G40  

order no. by-8g40

EUR 115,03 excl. VAT: € 96.66 / $ 108.26

20 cm bass driver with paper cone.

  • power handling (continuous/programme) = 250/500 W
  • frequency range = 65-6000 Hz
  • resonance frequency fs = 70 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 12,2 N/A
  • voice coil inductance L = 1,3 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 21 g
  • equivalent volume of compliance Vas = 17 l
  • total Q factor Qts = 0,36 (Qms=6,83, Qes=0,38)
  • voice coil diameter = 62,4 mm
  • maximum peak linear excursion vibration xlin = +/- 4,5 mm
  • mounting diameter d = 181 mm
  • overall diameter d = 212 mm
  • mounting depth (not countersunk) t = 96 mm
  • mass m = 3,3 kg
PDF data sheet

show kits to this chassis hide kits


 

10 inch woofer

Beyma 10MC500
open a bigger photo

recommended cabinet 1:
closed cabinet with 2,7 L volume
from 185/117 Hz (-3dB/-8dB)

recommended cabinet 2:
7,2 L volume bass reflex cabinet
with HP70 reflex tube, 12 cm long.
from 107/81 Hz (-3dB/-8dB).

Beyma 10MC500  

order no. by-10mc500

EUR 151,29 excl. VAT: € 127.13 / $ 142.39

25 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 500/1000 W
  • frequency range = 60-5000 Hz
  • resonance frequency fs = 63 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 18,2 N/A
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 350 cm2
  • effective mechanical mass incl. air load mms = 44 g
  • equivalent volume of compliance Vas = 25 l
  • total Q factor Qts = 0,27 (Qms=5, Qes=0,29)
  • voice coil diameter = 63,5 mm
  • maximum peak linear excursion vibration xlin = +/- 8 mm
  • mounting diameter d = 230 mm
  • overall diameter d = 261 mm
  • mounting depth (not countersunk) t = 125 mm
  • mass m = 5,7 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 10G40
open a bigger photo

recommended cabinet 1:
closed cabinet with 5,3 L volume
from 137/87 Hz (-3dB/-8dB)

recommended cabinet 2:
16 L volume bass reflex cabinet
with HP100 reflex tube, 22 cm long.
from 74/57 Hz (-3dB/-8dB).

Beyma 10G40  

order no. by-10g40

EUR 154,99 excl. VAT: € 130.24 / $ 145.87

24 cm bass driver with paper cone.

  • power handling (continuous/programme) = 400/800 W
  • frequency range = 45-4000 Hz
  • resonance frequency fs = 55 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 17,9 N/A
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 380 cm2
  • effective mechanical mass incl. air load mms = 51 g
  • equivalent volume of compliance Vas = 33 l
  • total Q factor Qts = 0,31 (Qms=6,47, Qes=0,33)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 228 mm
  • overall diameter d = 260,5 mm
  • mounting depth (not countersunk) t = 133 mm
  • mass m = 5,7 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 10LW30/N

recommended cabinet 1:
closed cabinet with 4,3 L volume
from 130/82 Hz (-3dB/-8dB)

recommended cabinet 2:
9,7 L volume bass reflex cabinet
with HP70 reflex tube, 21 cm long.
from 81/60 Hz (-3dB/-8dB).

Beyma 10LW30/N  

order no. by-10lw30n

EUR 213,48 excl. VAT: € 179.39 / $ 200.92

24 cm bass driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 450/900 W
  • frequency range = 35-3500 Hz
  • resonance frequency fs = 38 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 17,9 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 350 cm2
  • effective mechanical mass incl. air load mms = 53 g
  • equivalent volume of compliance Vas = 56 l
  • total Q factor Qts = 0,23 (Qms=9,9, Qes=0,24)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 228 mm
  • overall diameter d = 260,5 mm
  • mounting depth (not countersunk) t = 127,5 mm
  • mass m = 3,75 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SM110N

recommended cabinet 1:
closed cabinet with 13,7 L volume
from 96/60 Hz (-3dB/-8dB)

recommended cabinet 2:
47 L volume bass reflex cabinet
with HP100 reflex tube, 13 cm long.
from 49/39 Hz (-3dB/-8dB).

Beyma SM110N  

order no. by-sm110n

EUR 96,50 excl. VAT: € 81.09 / $ 90.82

24 cm bass driver with paper cone.

  • power handling (continuous/programme) = 200/400 W
  • frequency range = 45-6500 Hz
  • resonance frequency fs = 43 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 13,2 N/A
  • voice coil inductance L = 1,7 mH
  • effective piston radiating area Sd = 355 cm2
  • effective mechanical mass incl. air load mms = 38 g
  • equivalent volume of compliance Vas = 65 l
  • total Q factor Qts = 0,35 (Qms=7,88, Qes=0,37)
  • voice coil diameter = 51,7 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 228 mm
  • overall diameter d = 260,5 mm
  • mounting depth (not countersunk) t = 114 mm
  • mass m = 3,5 kg
PDF data sheet

show kits to this chassis hide kits


 

12 inch woofer

Beyma 12SW1300ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 4,5 L volume
from 137/87 Hz (-3dB/-8dB)

recommended cabinet 2:
11,5 L volume bass reflex cabinet
with HP100 reflex tube, 35 cm long.
from 81/61 Hz (-3dB/-8dB).

Beyma 12SW1300ND  

order no. by-12sw1300nd

EUR 437,68 excl. VAT: € 367.80 / $ 411.93

30 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 1200/2400 W
  • frequency range = 25-1800 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 25,3 N/A
  • voice coil inductance L = 3,25 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load mms = 118 g
  • equivalent volume of compliance Vas = 45 l
  • total Q factor Qts = 0,26 (Qms=12,07, Qes=0,27)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 10 mm
  • mounting diameter d = 280 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 132 mm
  • mass m = 7,2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12P80ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 2,7 L volume
from 247/156 Hz (-3dB/-8dB)

recommended cabinet 2:
3,5 L volume bass reflex cabinet
with HP100 reflex tube, 38 cm long.
from 192/142 Hz (-3dB/-8dB).

Beyma 12P80ND  

order no. by-12p80nd

EUR 408,44 excl. VAT: € 343.23 / $ 384.41

30 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 700/1400 W
  • frequency range = 25-4000 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 101 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 23,1 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load mms = 56 g
  • equivalent volume of compliance Vas = 95,7 l
  • total Q factor Qts = 0,15 (Qms=6,6, Qes=0,15)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 7,5 mm
  • mounting diameter d = 280 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 130 mm
  • mass m = 5,6 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12LX60 V2
open a bigger photo

recommended cabinet 1:
closed cabinet with 11,1 L volume
from 101/64 Hz (-3dB/-8dB)

recommended cabinet 2:
41 L volume bass reflex cabinet
with 2x HP100 reflex tube, 30 cm long.
from 51/40 Hz (-3dB/-8dB).

Beyma 12LX60 V2  

order no. by-12lx60-v2

EUR 232,97 excl. VAT: € 195.77 / $ 219.27

30 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 700/1400 W
  • frequency range = 35-2000 Hz
  • resonance frequency fs = 49 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 20 N/A
  • voice coil inductance L = 2,1 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load mms = 102 g
  • equivalent volume of compliance Vas = 43 l
  • total Q factor Qts = 0,39 (Qms=15,3, Qes=0,4)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 9 mm
  • mounting diameter d = 282,5 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 121,5 mm
  • mass m = 9,7 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12MC500
open a bigger photo

recommended cabinet 1:
closed cabinet with 13,2 L volume
from 120/76 Hz (-3dB/-8dB)

recommended cabinet 2:
48 L volume bass reflex cabinet
with 2x HP100 reflex tube, 14 cm long.
from 61/49 Hz (-3dB/-8dB).

Beyma 12MC500  

order no. by-12mc500

EUR 173,51 excl. VAT: € 145.81 / $ 163.30

29 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 500/1000 W
  • frequency range = 50-5500 Hz
  • resonance frequency fs = 57 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97,8 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 17,23 N/A
  • voice coil inductance L = 0,7 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load mms = 59 g
  • equivalent volume of compliance Vas = 54,9 l
  • total Q factor Qts = 0,37 (Qms=8,58, Qes=0,39)
  • voice coil diameter = 63,5 mm
  • maximum peak linear excursion vibration xlin = +/- 8 mm
  • mounting diameter d = 275 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 140 mm
  • mass m = 5,86 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12G40
open a bigger photo

recommended cabinet 1:
closed cabinet with 10,3 L volume
from 121/76 Hz (-3dB/-8dB)

recommended cabinet 2:
29 L volume bass reflex cabinet
with 2x HP100 reflex tube, 30 cm long.
from 68/52 Hz (-3dB/-8dB).

Beyma 12G40  

order no. by-12g40

EUR 203,73 excl. VAT: € 171.20 / $ 191.75

30 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 500/1000 W
  • frequency range = 35-4000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 6,7 Ohm
  • voice coil inductance L = 2,1 mH
  • effective piston radiating area Sd = 530 cm2
  • equivalent volume of compliance Vas = 81 l
  • total Q factor Qts = 0,29 (Qms=11,6, Qes=0,3)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 278 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 139 mm
PDF data sheet

show kits to this chassis hide kits

Beyma 12P1000ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 4,9 L volume
from 143/91 Hz (-3dB/-8dB)

recommended cabinet 2:
12,5 L volume bass reflex cabinet
with HP100 reflex tube, 28 cm long.
from 84/63 Hz (-3dB/-8dB).

Beyma 12P1000ND  

order no. by-12p1000nd

EUR 369,45 excl. VAT: € 310.46 / $ 347.72

30 cm bass driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 900/1800 W
  • frequency range = 30-2500 Hz
  • resonance frequency fs = 47 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 23,5 N/A
  • voice coil inductance L = 2 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load mms = 100 g
  • equivalent volume of compliance Vas = 49 l
  • total Q factor Qts = 0,26 (Qms=7,89, Qes=0,27)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 8 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 131 mm
  • mass m = 5,4 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SM212
open a bigger photo

recommended cabinet 1:
closed cabinet with 36 L volume
from 85/53 Hz (-3dB/-8dB)

recommended cabinet 2:
130 L volume bass reflex cabinet
with 2x HP100 reflex tube, 8 cm long.
from 43/34 Hz (-3dB/-8dB).

Beyma SM212  

order no. by-sm212

EUR 135,50 excl. VAT: € 113.87 / $ 127.53

30 cm bass driver with paper cone.

  • power handling (continuous/programme) = 350/700 W
  • frequency range = 45-6000 Hz
  • resonance frequency fs = 40 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 12,8 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load mms = 44 g
  • equivalent volume of compliance Vas = 150 l
  • total Q factor Qts = 0,37 (Qms=5,6, Qes=0,4)
  • voice coil diameter = 62,4 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 277,5 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 132 mm
  • mass m = 4,6 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SM112N
open a bigger photo

recommended cabinet 1:
closed cabinet with 33 L volume
from 79/50 Hz (-3dB/-8dB)

recommended cabinet 2:
132 L volume bass reflex cabinet
with 2x HP100 reflex tube, 10 cm long.
from 38/31 Hz (-3dB/-8dB).

Beyma SM112N  

order no. by-sm112n

EUR 154,99 excl. VAT: € 130.24 / $ 145.87

30 cm bass driver with paper cone.

  • power handling (continuous/programme) = 400/800 W
  • frequency range = 35-4000 Hz
  • resonance frequency fs = 43 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95,2 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 15,1 N/A
  • voice coil inductance L = 1,7 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load mms = 59 g
  • equivalent volume of compliance Vas = 94,24 l
  • total Q factor Qts = 0,43 (Qms=12,43, Qes=0,45)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 7,25 mm
  • mounting diameter d = 277,5 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 138 mm
  • mass m = 5,65 kg
PDF data sheet

show kits to this chassis hide kits


 

15 inch woofer

Beyma 15SW1300ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 19 L volume
from 98/62 Hz (-3dB/-8dB)

recommended cabinet 2:
65 L volume bass reflex cabinet
with 2x HP100 reflex tube, 17 cm long.
from 51/40 Hz (-3dB/-8dB).

Beyma 15SW1300ND  

order no. by-15sw1300nd

EUR 496,17 excl. VAT: € 416.95 / $ 466.98

37 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 1300/2600 W
  • frequency range = 25-1800 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 25,1 N/A
  • voice coil inductance L = 3,45 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 160 g
  • equivalent volume of compliance Vas = 89,6 l
  • total Q factor Qts = 0,36 (Qms=14,7, Qes=0,37)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 10 mm
  • mounting diameter d = 355 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 155 mm
  • mass m = 7,7 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15P1000FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 19 L volume
from 98/62 Hz (-3dB/-8dB)

recommended cabinet 2:
69 L volume bass reflex cabinet
with 2x HP100 reflex tube, 16 cm long.
from 50/40 Hz (-3dB/-8dB).

Beyma 15P1000FE  

order no. by-15p1000fe

EUR 291,46 excl. VAT: € 244.92 / $ 274.32

37 cm bass driver with paper cone.

  • power handling (continuous/programme) = 1000/2000 W
  • frequency range = 30-2000 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 23,5 N/A
  • voice coil inductance L = 2 mH
  • effective piston radiating area Sd = 855 cm2
  • effective mechanical mass incl. air load mms = 149 g
  • equivalent volume of compliance Vas = 85,9 l
  • total Q factor Qts = 0,37 (Qms=11,46, Qes=0,38)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 8 mm
  • mounting diameter d = 353 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 167 mm
  • mass m = 12,1 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15P80FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 12,3 L volume
from 141/89 Hz (-3dB/-8dB)

recommended cabinet 2:
28 L volume bass reflex cabinet
with 2x HP100 reflex tube, 22 cm long.
from 87/65 Hz (-3dB/-8dB).

Beyma 15P80FE  

order no. by-15p80fe

EUR 322,66 excl. VAT: € 271.14 / $ 303.68

37 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 800/1600 W
  • frequency range = 30-5000 Hz
  • resonance frequency fs = 41 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100,6 dB (2,83V; 1m)
  • DC resistance Re = 5 Ohm
  • force factor BL = 22,9 N/A
  • voice coil inductance L = 1,5 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 98 g
  • equivalent volume of compliance Vas = 159,3 l
  • total Q factor Qts = 0,24 (Qms=13,32, Qes=0,24)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 7,4 mm
  • mounting diameter d = 349,5 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 157,5 mm
  • mass m = 12,36 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15MC500
open a bigger photo

recommended cabinet 1:
closed cabinet with 44 L volume
from 90/57 Hz (-3dB/-8dB)

recommended cabinet 2:
175 L volume bass reflex cabinet
with 4x HP100 reflex tube, 11 cm long.
from 43/35 Hz (-3dB/-8dB).

Beyma 15MC500  

order no. by-15mc500

EUR 184,24 excl. VAT: € 154.82 / $ 173.40

37 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 500/1000 W
  • frequency range = 50-5000 Hz
  • resonance frequency fs = 50 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98,5 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 18,2 N/A
  • voice coil inductance L = 1,1 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 96 g
  • equivalent volume of compliance Vas = 116 l
  • total Q factor Qts = 0,45 (Qms=5, Qes=0,49)
  • voice coil diameter = 63,5 mm
  • maximum peak linear excursion vibration xlin = +/- 8 mm
  • mounting diameter d = 349,5 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 170 mm
  • mass m = 6,2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15P1000ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 17 L volume
from 103/65 Hz (-3dB/-8dB)

recommended cabinet 2:
59 L volume bass reflex cabinet
with 2x HP100 reflex tube, 17 cm long.
from 54/42 Hz (-3dB/-8dB).

Beyma 15P1000ND  

order no. by-15p1000nd

EUR 394,79 excl. VAT: € 331.76 / $ 371.57

37 cm bass driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 1000/2000 W
  • frequency range = 30-2000 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 24,3 N/A
  • voice coil inductance L = 2 mH
  • effective piston radiating area Sd = 855 cm2
  • effective mechanical mass incl. air load mms = 145 g
  • equivalent volume of compliance Vas = 88 l
  • total Q factor Qts = 0,35 (Qms=9,6, Qes=0,36)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 8 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 158 mm
  • mass m = 5,9 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15P1200ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 12,6 L volume
from 108/68 Hz (-3dB/-8dB)

recommended cabinet 2:
38 L volume bass reflex cabinet
with 2x HP100 reflex tube, 28 cm long.
from 59/46 Hz (-3dB/-8dB).

Beyma 15P1200ND  

order no. by-15p1200nd

EUR 437,68 excl. VAT: € 367.80 / $ 411.93

37 cm bass driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 1200/2400 W
  • frequency range = 25-1800 Hz
  • resonance frequency fs = 42 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 26,5 N/A
  • voice coil inductance L = 2,7 mH
  • effective piston radiating area Sd = 855 cm2
  • effective mechanical mass incl. air load mms = 165 g
  • equivalent volume of compliance Vas = 84,7 l
  • total Q factor Qts = 0,31 (Qms=14,2, Qes=0,32)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 9,5 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 155 mm
  • mass m = 7,7 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15LW30
open a bigger photo

recommended cabinet 1:
closed cabinet with 38 L volume
from 91/57 Hz (-3dB/-8dB)

recommended cabinet 2:
105 L volume bass reflex cabinet
with 2x HP100 reflex tube, 10 cm long.
from 52/39 Hz (-3dB/-8dB).

Beyma 15LW30  

order no. by-15lw30

EUR 271,97 excl. VAT: € 228.55 / $ 255.97

37 cm bass driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 500/1000 W
  • frequency range = 35-4000 Hz
  • resonance frequency fs = 32 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 18,9 N/A
  • voice coil inductance L = 1,4 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 83 g
  • equivalent volume of compliance Vas = 325 l
  • total Q factor Qts = 0,28 (Qms=8,4, Qes=0,29)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 168 mm
  • mass m = 4,47 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15LX60 V2
open a bigger photo

recommended cabinet 1:
closed cabinet with 40 L volume
from 75/47 Hz (-3dB/-8dB)

recommended cabinet 2:
159 L volume bass reflex cabinet
with 2x HP100 reflex tube, 9 cm long.
from 36/30 Hz (-3dB/-8dB).

Beyma 15LX60 V2  

order no. by-15lx60-v2

EUR 289,51 excl. VAT: € 243.29 / $ 272.48

37 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 700/1400 W
  • frequency range = 30-1500 Hz
  • resonance frequency fs = 42 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 21,1 N/A
  • voice coil inductance L = 2,1 mH
  • effective piston radiating area Sd = 910 cm2
  • effective mechanical mass incl. air load mms = 147 g
  • equivalent volume of compliance Vas = 105,53 l
  • total Q factor Qts = 0,44 (Qms=21,23, Qes=0,45)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 9 mm
  • mounting diameter d = 355 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 145 mm
  • mass m = 10,2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15G450N
open a bigger photo

recommended cabinet 1:
closed cabinet with 18 L volume
from 112/71 Hz (-3dB/-8dB)

recommended cabinet 2:
57 L volume bass reflex cabinet
with 2x HP100 reflex tube, 14 cm long.
from 61/47 Hz (-3dB/-8dB).

Beyma 15G450N  

order no. by-15g450n

EUR 365,55 excl. VAT: € 307.18 / $ 344.05

37 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 750/1500 W
  • frequency range = 30-1500 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • force factor BL = 24,3 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 142 g
  • equivalent volume of compliance Vas = 115 l
  • total Q factor Qts = 0,32 (Qms=10,5, Qes=0,33)
  • voice coil diameter = 114 mm
  • maximum peak linear excursion vibration xlin = +/- 6,5 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 170 mm
  • mass m = 11,5 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15G40

recommended cabinet 1:
closed cabinet with 21 L volume
from 98/62 Hz (-3dB/-8dB)

recommended cabinet 2:
60 L volume bass reflex cabinet
with 2x HP100 reflex tube, 19 cm long.
from 54/42 Hz (-3dB/-8dB).

Beyma 15G40  

order no. by-15g40

EUR 290,49 excl. VAT: € 244.11 / $ 273.40

37 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 700/1400 W
  • frequency range = 25-1500 Hz
  • resonance frequency fs = 37 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,9 Ohm
  • force factor BL = 23 N/A
  • voice coil inductance L = 2,9 mH
  • effective piston radiating area Sd = 830 cm2
  • effective mechanical mass incl. air load mms = 122 g
  • equivalent volume of compliance Vas = 149 l
  • total Q factor Qts = 0,3 (Qms=9,95, Qes=0,31)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 171 mm
  • mass m = 10,4 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15P80ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 18 L volume
from 124/78 Hz (-3dB/-8dB)

recommended cabinet 2:
60 L volume bass reflex cabinet
with 2x HP100 reflex tube, 9 cm long.
from 64/51 Hz (-3dB/-8dB).

Beyma 15P80ND  

order no. by-15p80nd

EUR 427,93 excl. VAT: € 359.61 / $ 402.76

37 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 800/1600 W
  • frequency range = 25-4000 Hz
  • resonance frequency fs = 54 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 5,3 Ohm
  • force factor BL = 22,8 N/A
  • voice coil inductance L = 1,6 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 105 g
  • equivalent volume of compliance Vas = 90,43 l
  • total Q factor Qts = 0,34 (Qms=7,95, Qes=0,36)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 7,5 mm
  • mounting diameter d = 349,5 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 157,5 mm
  • mass m = 6 kg
PDF data sheet

show kits to this chassis hide kits


 

18 inch woofer

Beyma 18PW1400FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 25 L volume
from 94/59 Hz (-3dB/-8dB)

recommended cabinet 2:
66 L volume bass reflex cabinet
with 2x HP100 reflex tube, 19 cm long.
from 54/41 Hz (-3dB/-8dB).

Beyma 18PW1400FE  

order no. by-18pw1400FE

EUR 418,18 excl. VAT: € 351.41 / $ 393.58

44 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 1400/2800 W
  • frequency range = 25-1800 Hz
  • resonance frequency fs = 32 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,05 Ohm
  • force factor BL = 29 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 1255 cm2
  • effective mechanical mass incl. air load mms = 230 g
  • equivalent volume of compliance Vas = 228,9 l
  • total Q factor Qts = 0,27 (Qms=10,23, Qes=0,28)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 10 mm
  • mounting diameter d = 413 mm
  • overall diameter d = 461 mm
  • mounting depth (not countersunk) t = 211 mm
  • mass m = 16,9 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 18SW1600ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 35 L volume
from 78/49 Hz (-3dB/-8dB)

recommended cabinet 2:
113 L volume bass reflex cabinet
with 4x HP100 reflex tube, 43 cm long.
from 41/32 Hz (-3dB/-8dB).

Beyma 18SW1600ND  

order no. by-18sw1600nd

EUR 648,24 excl. VAT: € 544.74 / $ 610.11

44 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 1600/3200 W
  • frequency range = 25-1800 Hz
  • resonance frequency fs = 32 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 29 N/A
  • voice coil inductance L = 3,1 mH
  • effective piston radiating area Sd = 1255 cm2
  • effective mechanical mass incl. air load mms = 260 g
  • equivalent volume of compliance Vas = 205,7 l
  • total Q factor Qts = 0,33 (Qms=11,74, Qes=0,34)
  • voice coil diameter = 126 mm
  • maximum peak linear excursion vibration xlin = +/- 10 mm
  • mounting diameter d = 413 mm
  • overall diameter d = 462 mm
  • mounting depth (not countersunk) t = 212 mm
  • mass m = 11,4 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 18PWB1000FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 73 L volume
from 58/37 Hz (-3dB/-8dB)

recommended cabinet 2:
286 L volume bass reflex cabinet
with 4x HP100 reflex tube, 26 cm long.
from 28/23 Hz (-3dB/-8dB).

Beyma 18PWB1000FE  

order no. by-18pwb1000FE

EUR 359,70 excl. VAT: € 302.27 / $ 338.54

44 cm bass driver with paper cone.

  • power handling (continuous/programme) = 1000/2000 W
  • frequency range = 25-2000 Hz
  • resonance frequency fs = 31 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96,5 dB (2,83V; 1m)
  • DC resistance Re = 5,9 Ohm
  • force factor BL = 25,8 N/A
  • voice coil inductance L = 2,2 mH
  • effective piston radiating area Sd = 1250 cm2
  • effective mechanical mass incl. air load mms = 233 g
  • equivalent volume of compliance Vas = 220 l
  • total Q factor Qts = 0,43 (Qms=7,9, Qes=0,45)
  • voice coil diameter = 101,6 mm
  • maximum peak linear excursion vibration xlin = +/- 12,5 mm
  • mounting diameter d = 413 mm
  • overall diameter d = 462 mm
  • mounting depth (not countersunk) t = 215 mm
  • mass m = 13,6 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 18P1000FE V2
open a bigger photo

recommended cabinet 1:
closed cabinet with 33 L volume
from 85/54 Hz (-3dB/-8dB)

recommended cabinet 2:
100 L volume bass reflex cabinet
with 4x HP100 reflex tube, 40 cm long.
from 46/36 Hz (-3dB/-8dB).

Beyma 18P1000FE V2  

order no. by-18p1000fe-v2

EUR 364,18 excl. VAT: € 306.03 / $ 342.76

44 cm bass driver with paper cone.

  • power handling (continuous/programme) = 1000/2000 W
  • frequency range = 25-2000 Hz
  • resonance frequency fs = 33 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 27,6 N/A
  • voice coil inductance L = 1,75 mH
  • effective piston radiating area Sd = 1250 cm2
  • effective mechanical mass incl. air load mms = 230 g
  • equivalent volume of compliance Vas = 223 l
  • total Q factor Qts = 0,31 (Qms=7,75, Qes=0,32)
  • voice coil diameter = 101,6 mm
  • maximum peak linear excursion vibration xlin = +/- 8 mm
  • mounting diameter d = 413 mm
  • overall diameter d = 462 mm
  • mounting depth (not countersunk) t = 215 mm
  • mass m = 13,8 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 18P1000ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 56 L volume
from 77/48 Hz (-3dB/-8dB)

recommended cabinet 2:
214 L volume bass reflex cabinet
with 4x HP100 reflex tube, 16 cm long.
from 37/30 Hz (-3dB/-8dB).

Beyma 18P1000ND  

order no. by-18p1000nd

EUR 457,18 excl. VAT: € 384.18 / $ 430.29

44 cm bass driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 1000/2000 W
  • frequency range = 25-2000 Hz
  • resonance frequency fs = 40 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 24,3 N/A
  • voice coil inductance L = 2,8 mH
  • effective piston radiating area Sd = 1250 cm2
  • effective mechanical mass incl. air load mms = 195 g
  • equivalent volume of compliance Vas = 178 l
  • total Q factor Qts = 0,41 (Qms=9,87, Qes=0,43)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 8 mm
  • mounting diameter d = 413 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 201 mm
  • mass m = 7 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 18P1200ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 36 L volume
from 87/55 Hz (-3dB/-8dB)

recommended cabinet 2:
120 L volume bass reflex cabinet
with 4x HP100 reflex tube, 29 cm long.
from 46/36 Hz (-3dB/-8dB).

Beyma 18P1200ND  

order no. by-18p1200nd

EUR 496,17 excl. VAT: € 416.95 / $ 466.98

44 cm bass driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 1200/2400 W
  • frequency range = 25-2000 Hz
  • resonance frequency fs = 37 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,3 Ohm
  • force factor BL = 26,3 N/A
  • voice coil inductance L = 2,3 mH
  • effective piston radiating area Sd = 1225 cm2
  • effective mechanical mass incl. air load mms = 199 g
  • equivalent volume of compliance Vas = 198 l
  • total Q factor Qts = 0,34 (Qms=10,39, Qes=0,35)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 9,5 mm
  • mounting diameter d = 415 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 203 mm
  • mass m = 8,5 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 18LX60 V2
open a bigger photo

recommended cabinet 1:
closed cabinet with 115 L volume
from 58/36 Hz (-3dB/-8dB)

recommended cabinet 2:
470 L volume bass reflex cabinet
with 4x HP100 reflex tube, 10 cm long.
from 27/23 Hz (-3dB/-8dB).

Beyma 18LX60 V2  

order no. by-18lx60-v2

EUR 330,45 excl. VAT: € 277.69 / $ 311.01

44 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 700/1400 W
  • frequency range = 25-1000 Hz
  • resonance frequency fs = 35 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 21,8 N/A
  • voice coil inductance L = 2,1 mH
  • effective piston radiating area Sd = 1320 cm2
  • effective mechanical mass incl. air load mms = 215 g
  • equivalent volume of compliance Vas = 236,52 l
  • total Q factor Qts = 0,48 (Qms=15,72, Qes=0,5)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 9 mm
  • mounting diameter d = 418 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 200 mm
  • mass m = 11,7 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 18G40
open a bigger photo

recommended cabinet 1:
closed cabinet with 95 L volume
from 63/40 Hz (-3dB/-8dB)

recommended cabinet 2:
359 L volume bass reflex cabinet
with 4x HP100 reflex tube, 13 cm long.
from 31/25 Hz (-3dB/-8dB).

Beyma 18G40  

order no. by-18g40

EUR 328,50 excl. VAT: € 276.05 / $ 309.18

44 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 700/1400 W
  • frequency range = 25-1500 Hz
  • resonance frequency fs = 32 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 22,5 N/A
  • voice coil inductance L = 3 mH
  • effective piston radiating area Sd = 1300 cm2
  • effective mechanical mass incl. air load mms = 171 g
  • equivalent volume of compliance Vas = 323 l
  • total Q factor Qts = 0,41 (Qms=12,7, Qes=0,42)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 415 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 198,5 mm
  • mass m = 11,5 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 18G50
open a bigger photo

recommended cabinet 1:
closed cabinet with 36 L volume
from 97/61 Hz (-3dB/-8dB)

recommended cabinet 2:
117 L volume bass reflex cabinet
with 4x HP100 reflex tube, 21 cm long.
from 52/40 Hz (-3dB/-8dB).

Beyma 18G50  

order no. by-18g50

EUR 437,68 excl. VAT: € 367.80 / $ 411.93

44 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 750/1500 W
  • frequency range = 25-1500 Hz
  • resonance frequency fs = 40 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 28,8 N/A
  • voice coil inductance L = 2 mH
  • effective piston radiating area Sd = 1320 cm2
  • effective mechanical mass incl. air load mms = 170 g
  • equivalent volume of compliance Vas = 212 l
  • total Q factor Qts = 0,32 (Qms=12,05, Qes=0,334)
  • voice coil diameter = 114 mm
  • maximum peak linear excursion vibration xlin = +/- 9 mm
  • mounting diameter d = 415 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 210 mm
  • mass m = 12,6 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 18G550
open a bigger photo

recommended cabinet 1:
closed cabinet with 51 L volume
from 76/48 Hz (-3dB/-8dB)

recommended cabinet 2:
183 L volume bass reflex cabinet
with 4x HP100 reflex tube, 22 cm long.
from 39/31 Hz (-3dB/-8dB).

Beyma 18G550  

order no. by-18g550

EUR 404,54 excl. VAT: € 339.95 / $ 380.74

44 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 900/1800 W
  • frequency range = 35-1000 Hz
  • resonance frequency fs = 36 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,25 Ohm
  • force factor BL = 24,4 N/A
  • voice coil inductance L = 1,4 mH
  • effective piston radiating area Sd = 1200 cm2
  • effective mechanical mass incl. air load mms = 190 g
  • equivalent volume of compliance Vas = 210 l
  • total Q factor Qts = 0,37 (Qms=8,875, Qes=0,39)
  • voice coil diameter = 114 mm
  • maximum peak linear excursion vibration xlin = +/- 9 mm
  • mounting diameter d = 415 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 210 mm
  • mass m = 12,6 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 18P80ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 49 L volume
from 85/54 Hz (-3dB/-8dB)

recommended cabinet 2:
133 L volume bass reflex cabinet
with 4x HP100 reflex tube, 27 cm long.
from 48/37 Hz (-3dB/-8dB).

Beyma 18P80ND  

order no. by-18p80nd

EUR 466,92 excl. VAT: € 392.37 / $ 439.45

44 cm bass driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 800/1600 W
  • frequency range = 25-4000 Hz
  • resonance frequency fs = 30 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 21,9 N/A
  • voice coil inductance L = 1,9 mH
  • effective piston radiating area Sd = 1225 cm2
  • effective mechanical mass incl. air load mms = 146 g
  • equivalent volume of compliance Vas = 411 l
  • total Q factor Qts = 0,28 (Qms=11,55, Qes=0,29)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 7,5 mm
  • mounting diameter d = 415 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 201 mm
  • mass m = 7 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SM118N

recommended cabinet 1:
closed cabinet with 156 L volume
from 58/37 Hz (-3dB/-8dB)

recommended cabinet 2:
637 L volume bass reflex cabinet
with 4x HP100 reflex tube, 3 cm long.
from 27/23 Hz (-3dB/-8dB).

Beyma SM118N  

order no. by-sm118n

EUR 223,23 excl. VAT: € 187.59 / $ 210.10

44 cm bass driver with paper cone.

  • power handling (continuous/programme) = 400/800 W
  • frequency range = 30-3000 Hz
  • resonance frequency fs = 36 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • force factor BL = 18,3 N/A
  • voice coil inductance L = 1,1 mH
  • effective piston radiating area Sd = 1150 cm2
  • effective mechanical mass incl. air load mms = 123 g
  • equivalent volume of compliance Vas = 300 l
  • total Q factor Qts = 0,49 (Qms=6,83, Qes=0,53)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 415 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 187 mm
  • mass m = 7 kg
PDF data sheet

show kits to this chassis hide kits


 

Woofer

Beyma 21PW1400FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 79 L volume
from 69/43 Hz (-3dB/-8dB)

recommended cabinet 2:
267 L volume bass reflex cabinet
with 4x HP100 reflex tube, 17 cm long.
from 36/28 Hz (-3dB/-8dB).

Beyma 21PW1400FE  

order no. by-21pw1400fe

EUR 535,16 excl. VAT: € 449.71 / $ 503.68

53 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 1400/2800 W
  • frequency range = 25-1800 Hz
  • resonance frequency fs = 30 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98,5 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 28,2 N/A
  • voice coil inductance L = 1,3 mH
  • effective piston radiating area Sd = 1734 cm2
  • effective mechanical mass incl. air load mms = 298 g
  • equivalent volume of compliance Vas = 401,5 l
  • total Q factor Qts = 0,34 (Qms=7,44, Qes=0,36)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 10 mm
  • mounting diameter d = 494 mm
  • overall diameter d = 550 mm
  • mounting depth (not countersunk) t = 242 mm
  • mass m = 19,9 kg
PDF data sheet

show kits to this chassis hide kits


 

Coaxial speaker

Beyma 5CX200FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 1,3 L volume
from 178/112 Hz (-3dB/-8dB)

recommended cabinet 2:
4 L volume bass reflex cabinet
with HP50 reflex tube, 13 cm long.
from 97/75 Hz (-3dB/-8dB).

Beyma 5CX200FE  

order no. by-5cx200fe

EUR 170,30 excl. VAT: € 143.11 / $ 160.28

14 cm coax driver with high quality cone.

  • power handling (continuous/programme) = 150/300 W
  • frequency range = 69-20000 Hz
  • resonance frequency fs = 69 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92,5 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 7,18 N/A
  • voice coil inductance L = 0,22 mH
  • effective piston radiating area Sd = 95 cm2
  • effective mechanical mass incl. air load mms = 7 g
  • equivalent volume of compliance Vas = 8,9 l
  • total Q factor Qts = 0,31 (Qms=10,07, Qes=0,32)
  • voice coil diameter = 38,1 mm
  • maximum peak linear excursion vibration xlin = +/- 5,7 mm
  • mounting diameter d = 119,2 mm
  • overall diameter d = 155 mm
  • mounting depth (not countersunk) t = 107 mm
  • mass m = 2,51 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 5CX200ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 0,99 L volume
from 221/139 Hz (-3dB/-8dB)

recommended cabinet 2:
2,6 L volume bass reflex cabinet
with HP50 reflex tube, 13 cm long.
from 127/97 Hz (-3dB/-8dB).

Beyma 5CX200ND  

order no. by-5cx200nd

EUR 271,97 excl. VAT: € 228.55 / $ 255.97

14 cm coax driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 150/300 W
  • frequency range = 75-20000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92,5 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 7,32 N/A
  • voice coil inductance L = 0,22 mH
  • effective piston radiating area Sd = 95 cm2
  • effective mechanical mass incl. air load mms = 6 g
  • equivalent volume of compliance Vas = 9,07 l
  • total Q factor Qts = 0,27 (Qms=10,04, Qes=0,28)
  • voice coil diameter = 38,1 mm
  • maximum peak linear excursion vibration xlin = +/- 5,7 mm
  • mounting diameter d = 119,2 mm
  • overall diameter d = 155 mm
  • mounting depth (not countersunk) t = 94,9 mm
  • mass m = 1,6 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 6CX200FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 1,7 L volume
from 162/102 Hz (-3dB/-8dB)

recommended cabinet 2:
5,2 L volume bass reflex cabinet
with HP50 reflex tube, 12 cm long.
from 88/68 Hz (-3dB/-8dB).

Beyma 6CX200FE  

order no. by-6cx200fe

EUR 198,86 excl. VAT: € 167.11 / $ 187.16

17 cm coax driver with high quality cone.

  • power handling (continuous/programme) = 200/400 W
  • frequency range = 60-20000 Hz
  • resonance frequency fs = 65 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 9,15 N/A
  • voice coil inductance L = 0,3 mH
  • effective piston radiating area Sd = 135 cm2
  • effective mechanical mass incl. air load mms = 14 g
  • equivalent volume of compliance Vas = 10,5 l
  • total Q factor Qts = 0,32 (Qms=5,1, Qes=0,34)
  • voice coil diameter = 50,8 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 145 mm
  • overall diameter d = 188 mm
  • mounting depth (not countersunk) t = 106 mm
  • mass m = 3,6 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 6CX200ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 1 L volume
from 191/121 Hz (-3dB/-8dB)

recommended cabinet 2:
2,7 L volume bass reflex cabinet
with HP50 reflex tube, 18 cm long.
from 110/84 Hz (-3dB/-8dB).

Beyma 6CX200ND  

order no. by-6cx200nd

EUR 307,06 excl. VAT: € 258.03 / $ 289.00

17 cm coax driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 200/400 W
  • frequency range = 65-20000 Hz
  • resonance frequency fs = 65 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 5 Ohm
  • force factor BL = 10,52 N/A
  • voice coil inductance L = 0,24 mH
  • effective piston radiating area Sd = 135 cm2
  • effective mechanical mass incl. air load mms = 16 g
  • equivalent volume of compliance Vas = 9,4 l
  • total Q factor Qts = 0,27 (Qms=3,95, Qes=0,29)
  • voice coil diameter = 50,8 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 152 mm
  • overall diameter d = 188 mm
  • mounting depth (not countersunk) t = 103 mm
  • mass m = 1,98 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 8BX/N  

order no. by-8bxn

EUR 162,79 excl. VAT: € 136.80 / $ 153.21

20 cm coax driver with high quality cone.

  • power handling (continuous/programme) = 100/200 W
  • frequency range = 60-20000 Hz
  • resonance frequency fs = 57 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 5,3 Ohm
  • force factor BL = 6,8 N/A
  • voice coil inductance L = 0,4 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 23 g
  • equivalent volume of compliance Vas = 22 l
  • total Q factor Qts = 0,66 (Qms=4,83, Qes=0,77)
  • voice coil diameter = 38,5 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 182 mm
  • overall diameter d = 212 mm
  • mounting depth (not countersunk) t = 111 mm
  • mass m = 2,9 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 8XC20
open a bigger photo

recommended cabinet 1:
closed cabinet with 4,7 L volume
from 151/95 Hz (-3dB/-8dB)

recommended cabinet 2:
17 L volume bass reflex cabinet
with HP100 reflex tube, 15 cm long.
from 75/60 Hz (-3dB/-8dB).

Beyma 8XC20  

order no. by-8xc20

EUR 223,23 excl. VAT: € 187.59 / $ 210.10

20 cm coax driver with paper cone.

  • power handling (continuous/programme) = 170/340 W
  • frequency range = 65-20000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 11,3 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 18 g
  • equivalent volume of compliance Vas = 17 l
  • total Q factor Qts = 0,4 (Qms=7,4, Qes=0,42)
  • voice coil diameter = 51,7 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 181 mm
  • overall diameter d = 212 mm
  • mounting depth (not countersunk) t = 131 mm
  • mass m = 3,7 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 10XC25

recommended cabinet 1:
closed cabinet with 14,9 L volume
from 115/73 Hz (-3dB/-8dB)

recommended cabinet 2:
53 L volume bass reflex cabinet
with HP100 reflex tube, 6 cm long.
from 59/47 Hz (-3dB/-8dB).

Beyma 10XC25  

order no. by-10xc25

EUR 271,97 excl. VAT: € 228.55 / $ 255.97

24 cm coax driver with paper cone.

  • power handling (continuous/programme) = 250/500 W
  • frequency range = 55-20000 Hz
  • resonance frequency fs = 53 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 12,5 N/A
  • voice coil inductance L = 1,5 mH
  • effective piston radiating area Sd = 380 cm2
  • effective mechanical mass incl. air load mms = 28 g
  • equivalent volume of compliance Vas = 66 l
  • total Q factor Qts = 0,37 (Qms=10, Qes=0,38)
  • voice coil diameter = 62,4 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 228 mm
  • overall diameter d = 260,5 mm
  • mounting depth (not countersunk) t = 153 mm
  • mass m = 5,1 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 10CX300FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 12,6 L volume
from 110/69 Hz (-3dB/-8dB)

recommended cabinet 2:
45 L volume bass reflex cabinet
with HP100 reflex tube, 9 cm long.
from 56/44 Hz (-3dB/-8dB).

Beyma 10CX300FE  

order no. by-10cx300fe

EUR 322,66 excl. VAT: € 271.14 / $ 303.68

24 cm coax driver with high quality cone.

  • power handling (continuous/programme) = 300/600 W
  • frequency range = 50-20000 Hz
  • resonance frequency fs = 52 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96,5 dB (2,83V; 1m)
  • DC resistance Re = 5,1 Ohm
  • force factor BL = 17,5 N/A
  • voice coil inductance L = 0,36 mH
  • effective piston radiating area Sd = 380 cm2
  • effective mechanical mass incl. air load mms = 11,9 g
  • equivalent volume of compliance Vas = 52,3 l
  • total Q factor Qts = 0,38 (Qms=3,3, Qes=0,43)
  • voice coil diameter = 63,5 mm
  • maximum peak linear excursion vibration xlin = +/- 6,6 mm
  • mounting diameter d = 228 mm
  • overall diameter d = 260,5 mm
  • mounting depth (not countersunk) t = 153 mm
  • mass m = 5,1 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12CXA400ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 11,1 L volume
from 132/84 Hz (-3dB/-8dB)

recommended cabinet 2:
29 L volume bass reflex cabinet
with 2x HP100 reflex tube, 23 cm long.
from 76/58 Hz (-3dB/-8dB).

Beyma 12CXA400ND  

order no. by-12cxa400nd

EUR 515,66 excl. VAT: € 433.33 / $ 485.33

30 cm coax driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 400/800 W
  • frequency range = 35-20000 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,6 Ohm
  • force factor BL = 18,1 N/A
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load mms = 48 g
  • equivalent volume of compliance Vas = 102,2 l
  • total Q factor Qts = 0,27 (Qms=6,24, Qes=0,28)
  • voice coil diameter = 101,6 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 286 mm
  • overall diameter d = 311,7 mm
  • mounting depth (not countersunk) t = 154 mm
  • mass m = 7,18 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12CXA400FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 8,7 L volume
from 133/84 Hz (-3dB/-8dB)

recommended cabinet 2:
21 L volume bass reflex cabinet
with HP100 reflex tube, 17 cm long.
from 79/60 Hz (-3dB/-8dB).

Beyma 12CXA400FE  

order no. by-12cxa400fe

EUR 398,79 excl. VAT: € 335.12 / $ 375.33

30 cm coax driver with high quality cone.

  • power handling (continuous/programme) = 400/800 W
  • frequency range = 40-20000 Hz
  • resonance frequency fs = 42 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 6,6 Ohm
  • force factor BL = 19,8 N/A
  • voice coil inductance L = 1,1 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load mms = 66 g
  • equivalent volume of compliance Vas = 94 l
  • total Q factor Qts = 0,25 (Qms=7,2, Qes=0,26)
  • voice coil diameter = 101,6 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 282,6 mm
  • overall diameter d = 311,7 mm
  • mounting depth (not countersunk) t = 165 mm
  • mass m = 11,3 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12XA30ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 11 L volume
from 131/83 Hz (-3dB/-8dB)

recommended cabinet 2:
22 L volume bass reflex cabinet
with HP100 reflex tube, 17 cm long.
from 84/63 Hz (-3dB/-8dB).

Beyma 12XA30ND  

order no. by-12xa30nd

EUR 476,67 excl. VAT: € 400.56 / $ 448.63

30 cm coax driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 350/700 W
  • frequency range = 35-20000 Hz
  • resonance frequency fs = 35 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,8 Ohm
  • force factor BL = 18,2 N/A
  • voice coil inductance L = 1,3 mH
  • effective piston radiating area Sd = 530 cm2
  • effective mechanical mass incl. air load mms = 47 g
  • equivalent volume of compliance Vas = 172 l
  • total Q factor Qts = 0,21 (Qms=7,98, Qes=0,22)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 284 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 152 mm
  • mass m = 6,3 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15CXA400ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 41 L volume
from 89/56 Hz (-3dB/-8dB)

recommended cabinet 2:
143 L volume bass reflex cabinet
with 2x HP100 reflex tube, 5 cm long.
from 46/36 Hz (-3dB/-8dB).

Beyma 15CXA400ND  

order no. by-15cxa400nd

EUR 535,16 excl. VAT: € 449.71 / $ 503.68

37 cm coax driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 400/800 W
  • frequency range = 35-20000 Hz
  • resonance frequency fs = 40 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,6 Ohm
  • force factor BL = 19,04 N/A
  • voice coil inductance L = 0,9 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 84 g
  • equivalent volume of compliance Vas = 196 l
  • total Q factor Qts = 0,36 (Qms=4,37, Qes=0,39)
  • voice coil diameter = 101,6 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 349,5 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 180 mm
  • mass m = 7,22 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15CXA400FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 60 L volume
from 77/48 Hz (-3dB/-8dB)

recommended cabinet 2:
230 L volume bass reflex cabinet
with 2x HP100 reflex tube, 3 cm long.
from 37/30 Hz (-3dB/-8dB).

Beyma 15CXA400FE  

order no. by-15cxa400fe

EUR 436,90 excl. VAT: € 367.14 / $ 411.20

37 cm coax driver with high quality cone.

  • power handling (continuous/programme) = 400/800 W
  • frequency range = 35-20000 Hz
  • resonance frequency fs = 40 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 18,2 N/A
  • voice coil inductance L = 0,95 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 90 g
  • equivalent volume of compliance Vas = 191 l
  • total Q factor Qts = 0,42 (Qms=16,4, Qes=0,43)
  • voice coil diameter = 101,6 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 349,5 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 185 mm
  • mass m = 11,9 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15XA38ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 46 L volume
from 91/57 Hz (-3dB/-8dB)

recommended cabinet 2:
130 L volume bass reflex cabinet
with 2x HP100 reflex tube, 6 cm long.
from 51/39 Hz (-3dB/-8dB).

Beyma 15XA38ND  

order no. by-15XA38ND

EUR 476,67 excl. VAT: € 400.56 / $ 448.63

37 cm coax driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 350/700 W
  • frequency range = 25-20000 Hz
  • resonance frequency fs = 33 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 6,8 Ohm
  • force factor BL = 18,2 N/A
  • voice coil inductance L = 1,6 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 72 g
  • equivalent volume of compliance Vas = 359 l
  • total Q factor Qts = 0,29 (Qms=7,5, Qes=0,3)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 181 mm
  • mass m = 6,8 kg
PDF data sheet

show kits to this chassis hide kits


 

Full Range

Beyma 8 AG/N  

order no. by-8ag-n8

EUR 47,76 excl. VAT: € 40.13 / $ 44.95

19 cm full range driver with paper cone.

  • power handling (continuous/programme) = 35 W
  • frequency range = 60-18000 Hz
  • resonance frequency fs = 101 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 7,5 Ohm
  • force factor BL = 7,27 N/A
  • voice coil inductance L = 0,32 mH
  • effective piston radiating area Sd = 227 cm2
  • effective mechanical mass incl. air load mms = 14 g
  • equivalent volume of compliance Vas = 12,79 l
  • total Q factor Qts = 0,98 (Qms=4,45, Qes=1,26)
  • voice coil diameter = 35 mm
  • mounting diameter d = 180 mm
  • overall diameter d = 205 mm
  • mounting depth (not countersunk) t = 84 mm
PDF data sheet

show kits to this chassis hide kits

Beyma 10AGN  

order no. by-10ag-n

EUR 67,26 excl. VAT: € 56.52 / $ 63.30

24 cm full range driver with paper cone.

  • power handling (continuous/programme) = 100 W
  • frequency range = 60-17000 Hz
  • resonance frequency fs = 90 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 7,4 Ohm
  • force factor BL = 6,7 N/A
  • voice coil inductance L = 0,4 mH
  • effective piston radiating area Sd = 360 cm2
  • effective mechanical mass incl. air load mms = 20 g
  • equivalent volume of compliance Vas = 30 l
  • total Q factor Qts = 1,32 (Qms=4,6, Qes=1,85)
  • voice coil diameter = 34,6 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 230 mm
  • overall diameter d = 258 mm
  • mounting depth (not countersunk) t = 100 mm
  • mass m = 1,55 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12GA50

Beyma 12GA50  

order no. by-12ga50

EUR 106,25 excl. VAT: € 89.29 / $ 100.00

30 cm full range driver with paper cone.

  • power handling (continuous/programme) = 250/500 W
  • frequency range = 70-18000 Hz
  • resonance frequency fs = 90 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 102 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 10 N/A
  • voice coil inductance L = 0,6 mH
  • effective piston radiating area Sd = 530 cm2
  • effective mechanical mass incl. air load mms = 34 g
  • equivalent volume of compliance Vas = 34 l
  • total Q factor Qts = 1,16 (Qms=14,8, Qes=1,26)
  • voice coil diameter = 52 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 277,5 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 139 mm
  • mass m = 3,55 kg
PDF data sheet

show kits to this chassis hide kits


 

no longer sold

Beyma CP350/TI  

order no. by-cp350ti

EUR 164,74 excl. VAT: € 138.44 / $ 155.05

.

  • power handling (continuous/programme) = 50 W
  • frequency range = 1000-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 104 dB (2,83V; 1m)
  • DC resistance Re = 6,8 Ohm
  • voice coil diameter = 44 mm
  • overall diameter d = 140 mm
  • mounting depth (not countersunk) t = 65 mm
  • mass m = 3,4 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP25  

order no. by-cp25

- not available

37,6 mm tweeter with high quality cone.

  • power handling (continuous/programme) = 25/50 W
  • frequency range = 2500-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 104 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 6 N/A
  • voice coil diameter = 37,6 mm
  • mounting diameter d = 120x130 mm
  • overall diameter d = 160x135 mm
  • mounting depth (not countersunk) t = 125 mm
  • mass m = 1,7 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SMC2012N  

order no. not-available

- not available

25,8 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 15/30 W
  • frequency range = 1000-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 101 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 5,6 N/A
  • voice coil diameter = 25,8 mm
  • mounting diameter d = 85x62,5 mm
  • overall diameter d = 115x91 mm
  • mounting depth (not countersunk) t = 87,5 mm
  • mass m = 0,5 kg
PDF data sheet

show kits to this chassis hide kits

Beyma CP650/TI

Beyma CP650/TI  

order no. not-available

- not available

.

  • power handling (continuous/programme) = 80 W
  • frequency range = 800-180000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 110 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • overall diameter d = 200 mm
  • mounting depth (not countersunk) t = 71 mm
PDF data sheet

show kits to this chassis hide kits

Beyma TD595  

order no. not-available

- not available

Horn for a compression driver with 1,4 inch throat.

  • Throat diameter = 1,4 inch
  • nominal angle (HxV) = 90 x 40 Deg
  • Cut off frequency : 800 Hz
  • over all dimensions (HxWxD) = 280 x 250 x 220 mm
  • baffle cutout dimensions (HxW) = 245 x 215 mm
  • net weight = 1,2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma TD590  

order no. not-available

- not available

Horn for a compression driver with 2 inch throat.

  • Throat diameter = 2 inch
  • nominal angle (HxV) = 90 x 40 Deg
  • Cut off frequency : 800 Hz
  • over all dimensions (HxWxD) = 280 x 250 x 220 mm
  • baffle cutout dimensions (HxW) = 245 x 215 mm
  • net weight = 1,2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma TD560  

order no. not-available

- not available

Horn for a compression driver with 2 inch throat.

  • Throat diameter = 2 inch
  • nominal angle (HxV) = 60 x 40 Deg
  • Cut off frequency : 800 Hz
  • over all dimensions (HxWxD) = 280 x 250 x 220 mm
  • baffle cutout dimensions (HxW) = 245 x 215 mm
  • net weight = 2,5 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 5B30CX  

order no. not-available

- not available

12 cm coax driver with polypropylene cone.

  • power handling (continuous/programme) = 25 W
  • frequency range = 55-22000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • mounting diameter d = 114 mm
  • overall diameter d = 130 mm
  • mounting depth (not countersunk) t = 61 mm
  • mass m = 0,72 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 8CX300ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,5 L volume
from 174/110 Hz (-3dB/-8dB)

recommended cabinet 2:
8,9 L volume bass reflex cabinet
with HP70 reflex tube, 11 cm long.
from 102/77 Hz (-3dB/-8dB).

Beyma 8CX300ND  

order no. not-available

- not available

20 cm coax driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 250/500 W
  • frequency range = 40-20000 Hz
  • resonance frequency fs = 57 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5 Ohm
  • force factor BL = 9,85 N/A
  • voice coil inductance L = 0,19 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 14 g
  • equivalent volume of compliance Vas = 35 l
  • total Q factor Qts = 0,26 (Qms=9,25, Qes=0,27)
  • voice coil diameter = 63,5 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 183 mm
  • overall diameter d = 212 mm
  • mounting depth (not countersunk) t = 105 mm
  • mass m = 2,6 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 10MW/ND

recommended cabinet 1:
closed cabinet with 6,5 L volume
from 122/77 Hz (-3dB/-8dB)

recommended cabinet 2:
20 L volume bass reflex cabinet
with HP100 reflex tube, 22 cm long.
from 66/51 Hz (-3dB/-8dB).

Beyma 10MW/ND  

order no. not-available

- not available

25 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 350/700 W
  • frequency range = 45-5000 Hz
  • resonance frequency fs = 49 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 15,7 N/A
  • voice coil inductance L = 1,7 mH
  • effective piston radiating area Sd = 350 cm2
  • effective mechanical mass incl. air load mms = 43 g
  • equivalent volume of compliance Vas = 40,7 l
  • total Q factor Qts = 0,32 (Qms=9,95, Qes=0,33)
  • voice coil diameter = 62,4 mm
  • maximum peak linear excursion vibration xlin = +/- 7,5 mm
  • mounting diameter d = 230 mm
  • overall diameter d = 261 mm
  • mounting depth (not countersunk) t = 118 mm
  • mass m = 3,1 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12P80FE
open a bigger photo

recommended cabinet 1:
closed cabinet with 3,5 L volume
from 199/126 Hz (-3dB/-8dB)

recommended cabinet 2:
6 L volume bass reflex cabinet
with HP100 reflex tube, 32 cm long.
from 138/102 Hz (-3dB/-8dB).

Beyma 12P80FE  

order no. not-available

- not available

30 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 700/1400 W
  • frequency range = 25-4000 Hz
  • resonance frequency fs = 46 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 23,1 N/A
  • voice coil inductance L = 1,5 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load mms = 66 g
  • equivalent volume of compliance Vas = 75,55 l
  • total Q factor Qts = 0,19 (Qms=10,14, Qes=0,189)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 7,4 mm
  • mounting diameter d = 280 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 132 mm
  • mass m = 11,8 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12MW/ND

recommended cabinet 1:
closed cabinet with 17 L volume
from 104/66 Hz (-3dB/-8dB)

recommended cabinet 2:
55 L volume bass reflex cabinet
with 2x HP100 reflex tube, 18 cm long.
from 56/43 Hz (-3dB/-8dB).

Beyma 12MW/ND  

order no. not-available

- not available

30 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 350/700 W
  • frequency range = 35-5000 Hz
  • resonance frequency fs = 43 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 16,9 N/A
  • voice coil inductance L = 1,7 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load mms = 59 g
  • equivalent volume of compliance Vas = 100 l
  • total Q factor Qts = 0,33 (Qms=9,15, Qes=0,34)
  • voice coil diameter = 62,4 mm
  • maximum peak linear excursion vibration xlin = +/- 7,5 mm
  • mounting diameter d = 278 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 132,3 mm
  • mass m = 3,3 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 10G200

recommended cabinet 1:
closed cabinet with 5,2 L volume
from 143/90 Hz (-3dB/-8dB)

recommended cabinet 2:
12,6 L volume bass reflex cabinet
with HP70 reflex tube, 11 cm long.
from 85/64 Hz (-3dB/-8dB).

Beyma 10G200  

order no. not-available

- not available

26 cm bass driver with paper cone.

  • power handling (continuous/programme) = 200 W
  • frequency range = bis 3000 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 380 cm2
  • equivalent volume of compliance Vas = 56,1 l
  • total Q factor Qts = 0,25 (Qms=7,02, Qes=0,26)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 4,5 mm
  • mounting diameter d = 240 mm
  • overall diameter d = 270 mm
  • mounting depth (not countersunk) t = 162 mm
  • mass m = 6 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 10M250

recommended cabinet 1:
closed cabinet with 4,1 L volume
from 187/118 Hz (-3dB/-8dB)

recommended cabinet 2:
8,3 L volume bass reflex cabinet
with HP70 reflex tube, 10 cm long.
from 120/89 Hz (-3dB/-8dB).

Beyma 10M250  

order no. not-available

- not available

26 cm midrange driver with paper cone.

  • power handling (continuous/programme) = 250 W
  • frequency range = 70-5500 Hz
  • resonance frequency fs = 50 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 380 cm2
  • equivalent volume of compliance Vas = 64 l
  • total Q factor Qts = 0,22 (Qms=7,93, Qes=0,223)
  • voice coil diameter = 62,4 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 240 mm
  • overall diameter d = 270 mm
  • mounting depth (not countersunk) t = 113 mm
  • mass m = 7,4 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 115NDW

recommended cabinet 1:
closed cabinet with 17 L volume
from 105/66 Hz (-3dB/-8dB)

recommended cabinet 2:
47 L volume bass reflex cabinet
with 2x HP100 reflex tube, 23 cm long.
from 60/45 Hz (-3dB/-8dB).

Beyma 115NDW  

order no. not-available

- not available

37 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 400 W
  • resonance frequency fs = 37 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98,5 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • voice coil inductance L = 2,1 mH
  • effective piston radiating area Sd = 910 cm2
  • equivalent volume of compliance Vas = 145 l
  • total Q factor Qts = 0,28 (Qms=5,6, Qes=0,3)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 6,75 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Beyma 102Nd

recommended cabinet 1:
closed cabinet with 0,56 L volume
from 485/306 Hz (-3dB/-8dB)

recommended cabinet 2:
0,37 L volume bass reflex cabinet
with HP70 reflex tube, 47 cm long.
from 495/379 Hz (-3dB/-8dB).

Beyma 102Nd  

order no. not-available

- not available

24 cm midrange driver with paper cone.

  • power handling (continuous/programme) = 200 W
  • frequency range = 100-4000 Hz
  • resonance frequency fs = 53 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 103 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • voice coil inductance L = 1,5 mH
  • effective piston radiating area Sd = 380 cm2
  • equivalent volume of compliance Vas = 56 l
  • total Q factor Qts = 0,09 (Qms=10,1, Qes=0,09)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 228 mm
  • overall diameter d = 260,5 mm
  • mounting depth (not countersunk) t = 111 mm
  • mass m = 4,1 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 122Nd
open a bigger photo

recommended cabinet 1:
closed cabinet with 1,8 L volume
from 330/208 Hz (-3dB/-8dB)

recommended cabinet 2:
2,1 L volume bass reflex cabinet
with HP100 reflex tube, 36 cm long.
from 265/196 Hz (-3dB/-8dB).

Beyma 122Nd  

order no. not-available

- not available

30 cm midrange driver with paper cone.

  • power handling (continuous/programme) = 200 W
  • frequency range = 80-6000 Hz
  • resonance frequency fs = 56 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 103 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • voice coil inductance L = 1,5 mH
  • effective piston radiating area Sd = 530 cm2
  • equivalent volume of compliance Vas = 72 l
  • total Q factor Qts = 0,14 (Qms=12, Qes=0,14)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 280 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 127 mm
  • mass m = 4,4 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12LW30/N

recommended cabinet 1:
closed cabinet with 13,9 L volume
from 104/66 Hz (-3dB/-8dB)

recommended cabinet 2:
40 L volume bass reflex cabinet
with 2x HP100 reflex tube, 30 cm long.
from 59/45 Hz (-3dB/-8dB).

Beyma 12LW30/N  

order no. not-available

- not available

30 cm bass driver with paper cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 450/900 W
  • frequency range = 35-5000 Hz
  • resonance frequency fs = 38 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 17,9 N/A
  • voice coil inductance L = 1,4 mH
  • effective piston radiating area Sd = 540 cm2
  • effective mechanical mass incl. air load mms = 66 g
  • equivalent volume of compliance Vas = 109 l
  • total Q factor Qts = 0,29 (Qms=6,6, Qes=0,3)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 277,5 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 147 mm
  • mass m = 3,83 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12XC30

recommended cabinet 1:
closed cabinet with 40 L volume
from 86/55 Hz (-3dB/-8dB)

recommended cabinet 2:
151 L volume bass reflex cabinet
with 2x HP100 reflex tube, 5 cm long.
from 43/35 Hz (-3dB/-8dB).

Beyma 12XC30  

order no. not-available

- not available

30 cm coax driver with paper cone.

  • power handling (continuous/programme) = 250/500 W
  • frequency range = 45-20000 Hz
  • resonance frequency fs = 43 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 12,8 N/A
  • voice coil inductance L = 1,5 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load mms = 40 g
  • equivalent volume of compliance Vas = 147 l
  • total Q factor Qts = 0,4 (Qms=7,4, Qes=0,42)
  • voice coil diameter = 62,4 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 277,5 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 168 mm
  • mass m = 5,2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12KX

recommended cabinet 1:
closed cabinet with 16 L volume
from 98/62 Hz (-3dB/-8dB)

recommended cabinet 2:
56 L volume bass reflex cabinet
with 2x HP100 reflex tube, 22 cm long.
from 50/40 Hz (-3dB/-8dB).

Beyma 12KX  

order no. not-available

- not available

30 cm coax driver with paper cone.

  • power handling (continuous/programme) = 300/600 W
  • frequency range = 35-17000 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 14,5 N/A
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 550 cm2
  • effective mechanical mass incl. air load mms = 45 g
  • equivalent volume of compliance Vas = 70 l
  • total Q factor Qts = 0,37 (Qms=10,4, Qes=0,38)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 286 mm
  • overall diameter d = 320 mm
  • mounting depth (not countersunk) t = 160 mm
  • mass m = 7,85 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12LX60
open a bigger photo

recommended cabinet 1:
closed cabinet with 9,1 L volume
from 112/70 Hz (-3dB/-8dB)

recommended cabinet 2:
27 L volume bass reflex cabinet
with HP100 reflex tube, 20 cm long.
from 62/47 Hz (-3dB/-8dB).

Beyma 12LX60  

order no. not-available

- not available

24 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 600 W
  • resonance frequency fs = 42 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 550 cm2
  • equivalent volume of compliance Vas = 66 l
  • total Q factor Qts = 0,3 (Qms=9,8, Qes=0,31)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 6,75 mm
  • mounting diameter d = 286 mm
  • overall diameter d = 230 mm
  • mounting depth (not countersunk) t = 130 mm
PDF data sheet

show kits to this chassis hide kits

Beyma 12M300

recommended cabinet 1:
closed cabinet with 6,7 L volume
from 177/111 Hz (-3dB/-8dB)

recommended cabinet 2:
12,7 L volume bass reflex cabinet
with HP100 reflex tube, 16 cm long.
from 116/86 Hz (-3dB/-8dB).

Beyma 12M300  

order no. not-available

- not available

30 cm midrange driver with paper cone.

  • power handling (continuous/programme) = 300 W
  • frequency range = 80-6000 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • voice coil inductance L = 1,3 mH
  • effective piston radiating area Sd = 550 cm2
  • equivalent volume of compliance Vas = 115 l
  • total Q factor Qts = 0,2 (Qms=8,49, Qes=0,204)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 286 mm
  • overall diameter d = 320 mm
  • mounting depth (not countersunk) t = 138 mm
  • mass m = 9,7 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 12K200

recommended cabinet 1:
closed cabinet with 11,3 L volume
from 125/79 Hz (-3dB/-8dB)

recommended cabinet 2:
24 L volume bass reflex cabinet
with HP100 reflex tube, 17 cm long.
from 79/59 Hz (-3dB/-8dB).

Beyma 12K200  

order no. not-available

- not available

30 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 250 W
  • resonance frequency fs = 35 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • voice coil inductance L = 1,5 mH
  • effective piston radiating area Sd = 530 cm2
  • equivalent volume of compliance Vas = 160 l
  • total Q factor Qts = 0,22 (Qms=11,17, Qes=0,229)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 4,5 mm
  • mounting diameter d = 286 mm
  • overall diameter d = 320 mm
  • mounting depth (not countersunk) t = 137 mm
PDF data sheet

show kits to this chassis hide kits

Beyma SM112W
open a bigger photo

recommended cabinet 1:
closed cabinet with 17 L volume
from 99/62 Hz (-3dB/-8dB)

recommended cabinet 2:
55 L volume bass reflex cabinet
with 2x HP100 reflex tube, 22 cm long.
from 52/41 Hz (-3dB/-8dB).

Beyma SM112W  

order no. not-available

- not available

30 cm bass driver with paper cone.

  • power handling (continuous/programme) = 400/800 W
  • frequency range = 35-4000 Hz
  • resonance frequency fs = 42 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 16,3 N/A
  • voice coil inductance L = 1,1 mH
  • effective piston radiating area Sd = 530 cm2
  • effective mechanical mass incl. air load mms = 62 g
  • equivalent volume of compliance Vas = 90 l
  • total Q factor Qts = 0,34 (Qms=4,92, Qes=0,36)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 277,5 mm
  • overall diameter d = 312 mm
  • mounting depth (not countersunk) t = 136 mm
  • mass m = 5,65 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15KX
open a bigger photo

recommended cabinet 1:
closed cabinet with 105 L volume
from 73/46 Hz (-3dB/-8dB)

recommended cabinet 2:
431 L volume bass reflex cabinet
with 4x HP100 reflex tube, 1 cm long.
from 34/28 Hz (-3dB/-8dB).

Beyma 15KX  

order no. not-available

- not available

37 cm coax driver with paper cone.

  • power handling (continuous/programme) = 300/600 W
  • frequency range = 25-17000 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 5,68 Ohm
  • force factor BL = 14,5 N/A
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 70 g
  • equivalent volume of compliance Vas = 203 l
  • total Q factor Qts = 0,5 (Qms=11,4, Qes=0,519)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 180 mm
  • mass m = 8,25 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15M300

recommended cabinet 1:
closed cabinet with 24 L volume
from 118/74 Hz (-3dB/-8dB)

recommended cabinet 2:
63 L volume bass reflex cabinet
with 2x HP100 reflex tube, 10 cm long.
from 68/51 Hz (-3dB/-8dB).

Beyma 15M300  

order no. not-available

- not available

37 cm midrange driver with paper cone.

  • power handling (continuous/programme) = 300 W
  • resonance frequency fs = 40 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • voice coil inductance L = 1,3 mH
  • effective piston radiating area Sd = 880 cm2
  • equivalent volume of compliance Vas = 220 l
  • total Q factor Qts = 0,27 (Qms=8,1, Qes=0,28)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 162 mm
  • mass m = 10 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SM115N

recommended cabinet 1:
closed cabinet with 55 L volume
from 80/50 Hz (-3dB/-8dB)

recommended cabinet 2:
156 L volume bass reflex cabinet
with 2x HP100 reflex tube, 8 cm long.
from 45/34 Hz (-3dB/-8dB).

Beyma SM115N  

order no. not-available

- not available

37 cm bass driver with paper cone.

  • power handling (continuous/programme) = 400/800 W
  • frequency range = 30-3000 Hz
  • resonance frequency fs = 29 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,5 Ohm
  • force factor BL = 17 N/A
  • voice coil inductance L = 1,1 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 77 g
  • equivalent volume of compliance Vas = 430 l
  • total Q factor Qts = 0,29 (Qms=10,1, Qes=0,3)
  • voice coil diameter = 77 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 160 mm
  • mass m = 6,5 kg
PDF data sheet

show kits to this chassis hide kits

Beyma SM115K
open a bigger photo

recommended cabinet 1:
closed cabinet with 32 L volume
from 86/54 Hz (-3dB/-8dB)

recommended cabinet 2:
78 L volume bass reflex cabinet
with 2x HP100 reflex tube, 20 cm long.
from 51/38 Hz (-3dB/-8dB).

Beyma SM115K  

order no. not-available

- not available

37 cm bass driver with paper cone.

  • power handling (continuous/programme) = 500/1000 W
  • frequency range = 25-2000 Hz
  • resonance frequency fs = 27 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 20,5 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 106 g
  • equivalent volume of compliance Vas = 345 l
  • total Q factor Qts = 0,25 (Qms=9,01, Qes=0,26)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 7,5 mm
  • mounting diameter d = 361 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 145 mm
  • mass m = 10,2 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15MW/ND
open a bigger photo

recommended cabinet 1:
closed cabinet with 42 L volume
from 89/56 Hz (-3dB/-8dB)

recommended cabinet 2:
153 L volume bass reflex cabinet
with 2x HP100 reflex tube, 4 cm long.
from 45/36 Hz (-3dB/-8dB).

Beyma 15MW/ND  

order no. not-available

- not available

37 cm bass driver with high quality cone. The magnet system is based on Neodymium technology.

  • power handling (continuous/programme) = 400/800 W
  • frequency range = 30-3500 Hz
  • resonance frequency fs = 42 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 5 Ohm
  • force factor BL = 17,2 N/A
  • voice coil inductance L = 1,7 mH
  • effective piston radiating area Sd = 880 cm2
  • effective mechanical mass incl. air load mms = 90 g
  • equivalent volume of compliance Vas = 176 l
  • total Q factor Qts = 0,38 (Qms=7,62, Qes=0,4)
  • voice coil diameter = 62,4 mm
  • maximum peak linear excursion vibration xlin = +/- 6,5 mm
  • mounting diameter d = 349,5 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 156,7 mm
  • mass m = 3,6 kg
PDF data sheet

show kits to this chassis hide kits

Beyma 15K200

recommended cabinet 1:
closed cabinet with 35 L volume
from 82/52 Hz (-3dB/-8dB)

recommended cabinet 2:
88 L volume bass reflex cabinet
with 2x HP100 reflex tube, 19 cm long.
from 48/36 Hz (-3dB/-8dB).

Beyma 15K200  

order no. not-available

- not available

37 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 300 W
  • resonance frequency fs = 27 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 880 cm2
  • equivalent volume of compliance Vas = 345 l
  • total Q factor Qts = 0,26 (Qms=9,01, Qes=0,27)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 7,5 mm
  • mounting diameter d = 361 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Beyma 15G400

recommended cabinet 1:
closed cabinet with 19 L volume
from 103/65 Hz (-3dB/-8dB)

recommended cabinet 2:
50 L volume bass reflex cabinet
with 2x HP100 reflex tube, 22 cm long.
from 59/45 Hz (-3dB/-8dB).

Beyma 15G400  

order no. not-available

- not available

37 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 400 W
  • resonance frequency fs = 35 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • voice coil inductance L = 1,3 mH
  • effective piston radiating area Sd = 830 cm2
  • equivalent volume of compliance Vas = 175 l
  • total Q factor Qts = 0,27 (Qms=8,3, Qes=0,284)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 155 mm
PDF data sheet

show kits to this chassis hide kits

Beyma 15LX60
open a bigger photo

recommended cabinet 1:
closed cabinet with 42 L volume
from 80/51 Hz (-3dB/-8dB)

recommended cabinet 2:
143 L volume bass reflex cabinet
with 2x HP100 reflex tube, 9 cm long.
from 42/33 Hz (-3dB/-8dB).

Beyma 15LX60  

order no. not-available

- not available

37 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 600 W
  • frequency range = 30-1500 Hz
  • resonance frequency fs = 35 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 910 cm2
  • equivalent volume of compliance Vas = 215 l
  • total Q factor Qts = 0,35 (Qms=8,7, Qes=0,36)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 6,75 mm
  • mounting diameter d = 362 mm
  • overall diameter d = 388 mm
  • mounting depth (not countersunk) t = 145 mm
PDF data sheet

show kits to this chassis hide kits

Beyma 18LX60
open a bigger photo

recommended cabinet 1:
closed cabinet with 113 L volume
from 59/37 Hz (-3dB/-8dB)

recommended cabinet 2:
399 L volume bass reflex cabinet
with 4x HP100 reflex tube, 14 cm long.
from 30/24 Hz (-3dB/-8dB).

Beyma 18LX60  

order no. not-available

- not available

44 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 600 W
  • resonance frequency fs = 27 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 1200 cm2
  • equivalent volume of compliance Vas = 500 l
  • total Q factor Qts = 0,37 (Qms=11,45, Qes=0,38)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 6,75 mm
  • mounting diameter d = 415 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 195 mm
PDF data sheet

show kits to this chassis hide kits

Beyma 21L50
open a bigger photo

recommended cabinet 1:
closed cabinet with 124 L volume
from 60/38 Hz (-3dB/-8dB)

recommended cabinet 2:
490 L volume bass reflex cabinet
with 4x HP100 reflex tube, 7 cm long.
from 29/24 Hz (-3dB/-8dB).

Beyma 21L50  

order no. not-available

- not available

53 cm bass driver with high quality cone.

  • power handling (continuous/programme) = 800 W
  • frequency range = 30-500 Hz
  • resonance frequency fs = 33 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • voice coil inductance L = 2,4 mH
  • effective piston radiating area Sd = 1600 cm2
  • equivalent volume of compliance Vas = 350 l
  • total Q factor Qts = 0,43 (Qms=12,03, Qes=0,45)
  • voice coil diameter = 114 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 495 mm
  • overall diameter d = 550 mm
  • mounting depth (not countersunk) t = 235 mm
PDF data sheet

show kits to this chassis hide kits

Beyma TD235  

order no. not-available

- not available

Horn for a compression driver with 1 inch throat.

  • Throat diameter = 1 inch
  • nominal angle (HxV) = 90 x 40 Deg
  • Cut off frequency : 1200 Hz
  • over all dimensions (HxWxD) = 170 x 230 x 92 mm
  • baffle cutout dimensions (HxW) = 136 x 180 mm
  • net weight = 0,9 kg
  • material: aluminium
PDF data sheet

show kits to this chassis hide kits

Beyma TD245  

order no. not-available

- not available

Horn for a compression driver with 1 inch throat.

  • Throat diameter = 1 inch
  • nominal angle (HxV) = 60 x 40 Deg
  • Cut off frequency : 1200 Hz
  • over all dimensions (HxWxD) = 170 x 230 x 92 mm
  • baffle cutout dimensions (HxW) = 136 x 180 mm
  • net weight = 0,8 kg
  • material: aluminium
PDF data sheet

show kits to this chassis hide kits

Beyma TD250  

order no. not-available

- not available

Horn for a compression driver with 1 inch throat.

  • Throat diameter = 1 inch
  • nominal angle (HxV) = 90 x 40 Deg
  • Cut off frequency : 800 Hz
  • over all dimensions (HxWxD) = 195 x 420 x 170 mm
  • baffle cutout dimensions (HxW) = 165 x 380 mm
  • net weight = 0,8 kg
PDF data sheet

show kits to this chassis hide kits

Beyma TD400N  

order no. not-available

- not available

Horn for a compression driver with 2 inch throat.

  • Throat diameter = 2 inch
  • nominal angle (HxV) = 90 x 40 Deg
  • Cut off frequency : 800 Hz
  • over all dimensions (HxWxD) = 270 x 420 x 227 mm
  • baffle cutout dimensions (HxW) = 230 x 365 mm
  • net weight = 1,5 kg
PDF data sheet

show kits to this chassis hide kits

Beyma TD565  

order no. not-available

- not available

Horn for a compression driver with 1,4 inch throat.

  • Throat diameter = 1,4 inch
  • nominal angle (HxV) = 60 x 40 Deg
  • Cut off frequency : 800 Hz
  • over all dimensions (HxWxD) = 280 x 250 x 220 mm
  • baffle cutout dimensions (HxW) = 245 x 215 mm
  • net weight = 2,5 kg
PDF data sheet

show kits to this chassis hide kits

Beyma TD360  

order no. not-available

- not available

Horn for a compression driver with 2 inch throat.

  • Throat diameter = 2 inch
  • nominal angle (HxV) = 60 x 40 Deg
  • Cut off frequency : 1000 Hz
  • over all dimensions (HxWxD) = 246 x 191 x 118 mm
  • baffle cutout dimensions (HxW) = 215 x 150 mm
  • net weight = 0,75 kg
  • material: aluminium
PDF data sheet

show kits to this chassis hide kits

The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright 2020 Iris Strassacker; All rights reserved. - errors and omissions excepted