|
Hypex UcD® Amplifier modules
|
|
|
|
|
UcD® Amplifier module UcD180HG with HxR
|
Enlarge |
What do you look for in a power amplifier? Bet it's the sound. Hypex UcD® amplifier modules are designed from the ground up for true fidelity. Available in 180W, 400W and 700W variants, they represent a new generation of switching power converters truly performing as amplifiers.
Features - Flat, fully load-independent frequency response
- Low output impedance
- Very low, frequency-independent THD
- Very low noise
- Consistent top performer in listening trials
- Runs on unregulated +/- rails
- Pop-free start and stop control
- Differential audio input
- Overcurrent and overvoltage protection
- HxR regulator mounted
Applications - Monitor loudspeakers for recording and mastering studios
- Audiophile power amplifiers for professional and consumer use
- Public Address systems
- Home theatre systems
- Active loudspeakers
Electrical data - Power supply voltage: +/- 30-50V
- Unit shuts down when either rail exceeds 52V
- Unit shuts down when either rail drops below 25V
- Power rating: 180Wrms @ 4ohm
Key mechanical data - Weight: 200g
- Dimentions: 65mm x 65mm x 30mm
- Mounting set included
Datasheet
Manual
Datasheet HxR
Price per unit
(Order No hy-UCD-180HG-HXR) EUR 105,90 excl. VAT: € 88.99 / $ 95.22
|
|
|
|
|
UcD® Amplifier module UcD400HG
|
Enlarge |
What do you look for in a power amplifier? Bet it's the sound. Hypex UcD® amplifier modules are designed from the ground up for true fidelity. Available in 180W, 400W and 700W variants, they represent a new generation of switching power converters truly performing as amplifiers.
Features - Flat, fully load-independent frequency response
- Low output impedance
- Very low, frequency-independent THD
- Very low noise
- Consistent top performer in listening trials
- Runs on unregulated +/- rails
- Pop-free start and stop control
- Differential audio input
- Overcurrent and overvoltage protection
- HxR regulator ready
Applications - Monitor loudspeakers for recording and mastering studios
- Audiophile power amplifiers for professional and consumer use
- Public Address systems
- Home theatre systems
- Active loudspeakers
Also available with pre-mounted HxR regulators
Electrical data - Power supply voltage: +/- 45-65V
- Unit shuts down when either rail exceeds 68V
- Unit shuts down when either rail drops below 30V
- Power rating: 400Wrms @ 4ohm
Key mechanical data - Weight: 250g
- Dimentions: 75mm x 82mm x 30mm
- Mounting set included
Datasheet
Manual
Price per unit
(Order No hy-UCD-400HG) - not available
|
|
|
|
|
UcD® Amplifier module UcD400HG with HxR
|
Enlarge |
What do you look for in a power amplifier? Bet it's the sound. Hypex UcD® amplifier modules are designed from the ground up for true fidelity. Available in 180W, 400W and 700W variants, they represent a new generation of switching power converters truly performing as amplifiers.
Features - Flat, fully load-independent frequency response
- Low output impedance
- Very low, frequency-independent THD
- Very low noise
- Consistent top performer in listening trials
- Runs on unregulated +/- rails
- Pop-free start and stop control
- Differential audio input
- Overcurrent and overvoltage protection
- HxR regulator mounted
Applications - Monitor loudspeakers for recording and mastering studios
- Audiophile power amplifiers for professional and consumer use
- Public Address systems
- Home theatre systems
- Active loudspeakers
Electrical data - Power supply voltage: +/- 45-65V
- Unit shuts down when either rail exceeds 68V
- Unit shuts down when either rail drops below 30V
- Power rating: 400Wrms @ 4ohm
Key mechanical data - Weight: 250g
- Dimentions: 75mm x 82mm x 30mm
- Mounting set included
Datasheet
Manual
Datasheet HxR
Price per unit
(Order No hy-UCD-400HG-HXR) EUR 130,90 excl. VAT: € 110.00 / $ 117.70
|
|
|
|
|
UcD® Amplifier module UcD700HG
|
Enlarge |
What do you look for in a power amplifier? Bet it's the sound. Hypex UcD® amplifier modules are designed from the ground up for true fidelity. Available in 180W, 400W and 700W variants, they represent a new generation of switching power converters truly performing as amplifiers.
Features - Flat, fully load-independent frequency response
- Low output impedance
- Very low, frequency-independent THD
- Very low noise
- Consistent top performer in listening trials
- Runs on unregulated +/- rails
- Pop-free start and stop control
- Differential audio input
- Overcurrent and overvoltage protection
- HxR regulator ready
Applications - Monitor loudspeakers for recording and mastering studios
- Audiophile power amplifiers for professional and consumer use
- Public Address systems
- Home theatre systems
- Active loudspeakers
Also available with pre-mounted HxR regulators
Electrical data - Power supply voltage: +/- 75-95V
- Driver supply voltage: +12-15V
- Unit shuts down when either rail exceeds 96V
- Output current limits at 28A
- Output power: 700Wrms @ 4Ohm
Key mechanical data - Weight: 280g
- Dimentions: 130mm x 80mm x 40mm
- Mounting set included
Datasheet
Price per unit
(Order No hy-UCD-700HG) - not available
|
|
|
|
|
UcD® Amplifier module UcD700HG with HxR
|
Enlarge |
What do you look for in a power amplifier? Bet it's the sound. Hypex UcD® amplifier modules are designed from the ground up for true fidelity. Available in 180W, 400W and 700W variants, they represent a new generation of switching power converters truly performing as amplifiers.
Features - Flat, fully load-independent frequency response
- Low output impedance
- Very low, frequency-independent THD
- Very low noise
- Consistent top performer in listening trials
- Runs on unregulated +/- rails
- Pop-free start and stop control
- Differential audio input
- Overcurrent and overvoltage protection
- HxR regulator ready
Applications - Monitor loudspeakers for recording and mastering studios
- Audiophile power amplifiers for professional and consumer use
- Public Address systems
- Home theatre systems
- Active loudspeakers
Also available with pre-mounted HxR regulators
Electrical data - Power supply voltage: +/- 75-95V
- Driver supply voltage: +12-15V
- Unit shuts down when either rail exceeds 96V
- Output current limits at 28A
- Output power: 700Wrms @ 4Ohm
Key mechanical data - Weight: 280g
- Dimentions: 130mm x 80mm x 40mm
- Mounting set included
Datasheet
Datasheet HxR
Price per unit
(Order No hy-UCD-700HG-HXR) - not available
|
|
|
|
|
UcD® Amplifier module UcD2kwith HxR
|
Enlarge |
UcD module 2000Wrms, 3200W peak.
Highlights - Flat, fully load-independent frequency responce
- Low output inpedance
- Very low, frequency-independent THD
- Very low noice
- Fully passive loop control
Features - Runs on unregulated +/- rails
- Differential audio input
- On-board clipping detection
- DC-fault detection
- Overcurrent and overvoltage protection
Applications - Public Address systems
- Active loudspeakers
Electrical data - Power supply voltage: +/- 50-100V
- Driver supply voltage: +12-15V
- Unit shuts down when either rail exceeds 98V
- Output current limits at 50A
- Output power: 2500Wrms @ 4Ohm
- Output power: 2000Wrms @ 2Ohm
Key mechanical data - Weight: 500g
- Dimensions: 141mm x 110mm x 36mm
- Mounting set included
Datasheet
Price per unit
(Order No hy-UCD-2k) - not available
|
|
|
|
|
UcD® Amplifier module UcD34MP
|
Enlarge |
The UcD34MP is a high efficiency Safety Class 2 four channel mains powered UcD module. The UcD32MP integrates a low power (Max. 10W) standby SMPS, the main power supply is triggered for normal operation or latched off in case of a critical fault via in built-in actuators.
Features - Advanced over current protection
- Remote controlled operation
- High efficiency
- Universal input voltage range
- Extremely small form factor
- Low EMI
- 10W standby SMPS
Applications - Stereo or multichannel audio systems based on our UcD32 module
- Active loudspeaker
Electrical data - High line Input Voltage: 180 - 264 Vac
- Low line Input Voltage: 90 - 132 Vac
- Power rating: 30Wrms @ 4ohm per channel
- Total Power rating: 100Wrms
- Total Power rating : 70Wrms @20Hz
Key mechanical data - Weight: 200g
- Dimensions: 165mm x 70mm x 31,6mm
Datasheet
Price per unit
(Order No hy-ucd34mp) - not available
|
|
|
|
|
UcD® Amplifier module UcD36MP
|
Enlarge |
The UcD36MP is a high efficiency Safety Class 2 six channel mains powered UcD module. The UcD32MP integrates a low power (Max. 10W) standby SMPS, the main power supply is triggered for normal operation or latched off in case of a critical fault via in built-in actuators.
Features - Advanced over current protection
- Remote controlled operation
- High efficiency
- Universal input voltage range
- Extremely small form factor
- Low EMI
- 10W standby SMPS
Applications - Stereo or multichannel audio systems based on our UcD32 module
- Active loudspeaker
Electrical data - High line Input Voltage: 180 - 264 Vac
- Low line Input Voltage: 90 - 132 Vac
- Power rating: 30Wrms @ 4ohm per channel
- Total Power rating: 100Wrms
- Total Power rating : 70Wrms @20Hz
Key mechanical data - Weight: 200g
- Dimensions: 187mm x 70mm x 31,6mm
Datasheet
Price per unit
(Order No hy-ucd36mp) - not available
|
|
|
|
|
|