Accessories

Hard-Sided Flight Case MR-106

Hard-Sided Flight Case For 482 mm (19") units.

Units can be inserted from both sides (double door system)
Scratch-proof and shock-proof black ABS housing
Fully closed 3 mm aluminium profile frames
High stability despite low weight
Stackable
Robust carrying handles
Butterfly locks
Mounting depth behind the front plate: 480 mm
Supplied with mounting screws

Supplied without units.

Specifications:

Size: 6 RS
Inside dim. (WxHxD): 444x285x530 mm
Outside dim. (WxHxD): 540x340x560 mm
Weight: 7 kg

Price per unit (Order No. mo-247850) EUR 285,70 excl. VAT: € 240.08 / $ 283.30

Universal flight case with castors MR-6LIGHT

Universal flight case with castors, for transporting e.g. stands, cables and accessories for stage applications, DJs or lighting equipment.

Due to the special design, the flightcase can easily be pulled like a trolley
Multilayer multiplex wood, black, plastic-laminated
Aluminium profile edges
Chromium-plated ball protection corners
Butterfly locks, folding recessed handles
4 castors
Inside foam padding
Inside dimensions: 980x345x345 mm
Outside dimensions: 1,050x440x410 mm
Weight: 20 kg

Price per unit (Order No. mo-250820) EUR 380,60 excl. VAT: € 319.83 / $ 377.40

LED switch-mode PSU PSIP-150/12

LED switch-mode PSU, for indoors and outdoors (IP65).

Especially for LED installations with high power requirements
130 W (PSIP-150/12) or 150 W (PSIP-150/24)
Low-noise according to EMC standard EN 61000-3-2 class C
Active PFC filter
Fine adjustment of output current and output voltage
Protected against short circuit, overload, overheating and overvoltage
Connection via bare cable ends
Robust metal housing with mounting flange

Specifications:

Input voltage: 100-240 V / 50 Hz/60 Hz
Output voltage: 12 V DC current , adjustable 9-13 V DC current
Charging/output current: 11 A, adjustable 5.5-11 A
Charging time: -
Trickle charge: -
Reactivation: -
Admiss. ambient temp.: -20 °C to +50 °C
Dimensions: 223x68x39 mm
Weight: 986 g

Price per unit (Order No. mo-273410) EUR 93,46 excl. VAT: € 78.54 / $ 92.67

LED switch-mode PSU PSIP-60/12

LED switch-mode PSU, for indoors and outdoors (IP67).

Especially for LED installations
60 W
Due to automatic digital switching, suitable for small loads, e.g. ideally suited for individual LED strips
Low-noise installation according to EMC standard EN 61000-3-2 class C
Active PFC filter
Protected against short circuit, overload, overheating and overvoltage
Connection via bare cable ends
Robust plastic housing with mounting flange

Specifications:

Input voltage: 100-240 V / 50 Hz/60 Hz
Output voltage: 12 V DC current
Charging/output current: 5 A
Charging time: -
Trickle charge: -
Reactivation: -
Admiss. ambient temp.: -20 °C to +50 °C
Dimensions: 200x41x32 mm
Weight: 420 g

Price per unit (Order No. mo-273430) EUR 50,35 excl. VAT: € 42.31 / $ 49.93

LED switch-mode PSU PSL-12/12

LED switch-mode PSU, for indoor applications.

Especially for LED installations
12 W
Low-noise according to EMC standard EN 61000-3-2 class A
Protected against short circuit, overload and overvoltage
Connection via bare cable ends
Plastic housing with mounting flange

Specifications:

Input voltage: 230 V /50 Hz
Output voltage: 12 V DC current
Charging/output current: 1 A
Charging time: -
Trickle charge: -
Reactivation: -
Admiss. ambient temp.: -20 °C to +50 °C
Dimensions: 77x40x29 mm
Weight: 78 g

Price per unit (Order No. mo-270060) EUR 10,99 excl. VAT: € 9.24 / $ 10.90

LED switch-mode PSU PSL-12/24

LED switch-mode PSU, for indoor applications.

Especially for LED installations
12 W
Low-noise according to EMC standard EN 61000-3-2 class A
Protected against short circuit, overload and overvoltage
Connection via bare cable ends
Plastic housing with mounting flange

Specifications:

Input voltage: 230 V /50 Hz
Output voltage: 24 V DC current
Charging/output current: 0.5 A
Charging time: -
Trickle charge: -
Reactivation: -
Admiss. ambient temp.: -20 °C to +50 °C
Dimensions: 77x40x29 mm
Weight: 78 g

Price per unit (Order No. mo-270100) EUR 10,99 excl. VAT: € 9.24 / $ 10.90

LED switch-mode PSU PSL-18/12

LED switch-mode PSU, for indoors and outdoors (IP67).

Especially for LED installations
18 W
Low-noise according to EMC standard EN 61000-3-2 class A
Protected against short circuit, overload, overheating and overvoltage
Connection via bare cable ends
Plastic housing with mounting flange

Specifications:

Input voltage: 230 V /50 Hz
Output voltage: 12 V DC current
Charging/output current: 1.5 A
Charging time: -
Trickle charge: -
Reactivation: -
Admiss. ambient temp.: -20 °C to +50 °C
Dimensions: 140x22x30 mm
Weight: 165 g

Price per unit (Order No. mo-272100) EUR 11,51 excl. VAT: € 9.67 / $ 11.41

Low-voltage connector, 5.5/2.1 mm T-521JST

Low-voltage connector, 5.5/2.1 mm, for quickly installing e.g. surveillance cameras, LED strips and LED bars. With plug-in screw terminal and polarity identification. T-521PST = plug

T-521JST = inline jack

Price per unit (Order No. mo-348930) EUR 5,80 excl. VAT: € 4.87 / $ 5.75

Flight case with castors MR-10LIGHT

Flight case with castors, for transporting light effect units.

2 partitions and 1 storage tray, several positions possible
Multilayer multiplex wood, black, plastic-laminated
Aluminium profile edges
Chromium-plated ball protection corners
Butterfly locks, folding recessed handles
4 castors
Stackable due to indentations for the castors in the cover of the flight case
Inside dimensions: 1,175x580x540 mm
Outside dimensions: 1,220x765x625 mm
Weight: 56 kg

Price per unit (Order No. mo-250260) EUR 718,30 excl. VAT: € 603.61 / $ 712.26

Universal flight case MR-3LIGHT

Universal flight case, for transporting e.g. light effect units, cables, accessories.

Multilayer multiplex wood, black, plastic-laminated
Aluminium profile edges
Chromium-plated ball protection corners, reinforcing angles
Butterfly locks, folding recessed handles
Foam-padded interior

Specifications:

Inside dimensions: 525x315x420 mm
Outside dimensions: 570x355x470 mm
Weight: 8.7 kg

Price per unit (Order No. mo-244420) EUR 181,90 excl. VAT: € 152.86 / $ 180.37

3-channel wireless LED controller CU-100RGB

3-channel wireless LED controller, for 12 V or 24 V LED products, with wireless remote control.

For controlling red, green and blue LEDs
3 separate control channels, thus mixed colours possible (with RGB LEDs only)
Ergonomic, user-friendly wireless remote control:Colour selection via touch-sensitive colour wheel
Control buttons for brightness, speed and program
Push-button on/off
Power supply via 2 x battery AAA size (not supplied)
Transmission frequency: 2.4 GHz
Automatic run of 20 programs
Screw terminals for connecting the LED strips
Connection of the power supply via screw terminals
Power supply: 12 V DC current /9 A or 24 V DC current /9 A
Maximum load: 3 A per channel
Dimensions: 85x45x23 mm
Weight: 46 g

Licence-free in the EU.

Price per unit (Order No. mo-386660) EUR 37,99 excl. VAT: € 31.92 / $ 37.67

LED controller CU-10R

LED controller, for controlling up to 2 unicoloured LED strips.

Wireless remote control CU-10T is required for operation
Carrier frequency: 868 MHz
Easy assignment of the controllers via learn button
Antenna integrated into the housing
Power supply: 12-36 V DC current , 10.5 A max.
Maximum load: 5 A per channel
Dimensions: 46x178x18 mm
Weight: 98 g

Price per unit (Order No. mo-386560) EUR 51,86 excl. VAT: € 43.58 / $ 51.42

Wireless remote control CU-10T

Wireless remote control, for controlling unicoloured LED strips.

LED controller CU-10R is required for operation
5 selection buttons for individual controllers/zones
Multiple controllers possible in one zone
Transmission frequency: 868 MHz
Brightness control
On/off button
Supplied with wall holder
Power supply via 3 V button cell
Dimensions: 39x137x11 mm
Weight: 41 g

Licence-free in the EU.

Price per unit (Order No. mo-386550) EUR 22,98 excl. VAT: € 19.31 / $ 22.79

LED controller CU-40R

LED controller, for controlling RGB and RGBW LED strips.

Wireless remote control CU-40T is required for operation
Carrier frequency: 868 MHz
Easy assignment of the controllers via learn button
Status LED
Antenna integrated into the housing
Power supply: 12-36 V DC current , 20.5 A max.
Maximum load: 5 A per channel
Dimensions: 46x178x18 mm
Weight: 107 g

Price per unit (Order No. mo-386620) EUR 81,04 excl. VAT: € 68.10 / $ 80.36

Wireless remote control CU-40T

Wireless remote control, for controlling RGB and RGBW LED strips.

LED controller CU-40R is required for operation
10 selection buttons for individual controllers/zones
Multiple controllers possible in one zone
Transmission frequency: 868 MHz
Colour wheel selection
Individual colour selection
Brightness control and speed control
On/off button
Colour change function
Automatic switch-off
Supplied with wall holder
Power supply via 3 x 1.5 V battery AAA size (not supplied)
Dimensions: 44x131x23 mm
Weight: 58 g

Licence-free in the EU.

Price per unit (Order No. mo-386610) EUR 86,69 excl. VAT: € 72.85 / $ 85.96

Repeater (LED booster) for RGBW LED controller CU-4BOOST

Repeater (LED booster) for RGBW LED controller

Signal inputs via plug-in screw terminals
Outputs via plug-in screw terminals
Output current: 11 A max. per channel, total: 44 A max.
Power supply: 12-24 V DC current /44 A via 1 m cable (6 mm2)
Dimensions: 106x38x128 mm
Weight: 620 g

Price per unit (Order No. mo-386520) EUR 84,55 excl. VAT: € 71.05 / $ 83.84

Flexible LED strip, 24 V DC current , Humidity-proof version LEDS-10MP/RGB

Flexible LED strip, 24 V DC current , Humidity-proof version

Easy installation due to perfect flexibility and self-adhesive rear side which adheres to almost any kind of surface, suitable for indoor and outdoor applications. Ideally suited for decorative lighting. Due to small dimensions, an application is also possible at locations where standard lamps cannot be used. Features bare cable ends for the direct connection to a PSU or alternatively to a DMX interface, available at option.

Fitted with SMD LEDs
Beam angle of each LED: 120°
Can be cut into segments of variable size (groups of 6 LEDs: LEDS-10MP/WS, LEDS-10MP/WWS, groups of 5 LEDs: LEDS-10MP/RGB)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel
Supplied with mounting accessories

Specifications:

Colour: red/green/blue
LEDs: 300, SMD 5050
Beam angle: 120°
Colour temperature: -
Wavelength: -
Luminous flux: -
Luminous intensity: -
Length: 10 m
Width: 10 mm
Height: -
Power supply: 24 V DC current /2.5 A (0.4 A/m)
Other features: -

Price per unit (Order No. mo-385660) EUR 180,20 excl. VAT: € 151.43 / $ 178.69

Flexible LED strip, 24 V DC current , Humidity-proof version LEDS-10MP/WS

Fitted with SMD LEDs
Beam angle of each LED: 120°
Can be cut into segments of variable size (groups of 6 LEDs: LEDS-10MP/WS, LEDS-10MP/WWS, groups of 5 LEDs: LEDS-10MP/RGB)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel
Supplied with mounting accessories

Specifications:

Colour: white
LEDs: 600, SMD 3528
Beam angle: 120°
Colour temperature: 5,500 K
Wavelength: -
Luminous flux: 360 lm
Luminous intensity: 1,800 mcd
Length: 10 m
Width: 8 mm
Power supply: 24 V DC current /1.5 A (0.2 A/m)

Price per unit (Order No. mo-385670) EUR 119,30 excl. VAT: € 100.25 / $ 118.30

Flexible LED strip, 24 V DC current , Humidity-proof version LEDS-10MP/WWS

Fitted with SMD LEDs
Beam angle of each LED: 120°
Can be cut into segments of variable size (groups of 6 LEDs: LEDS-10MP/WS, LEDS-10MP/WWS, groups of 5 LEDs: LEDS-10MP/RGB)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel
Supplied with mounting accessories

Specifications:

Colour: warm white
LEDs: 600, SMD 3528
Beam angle: 120°
Colour temperature: 3,300 K
Wavelength: -
Luminous flux: 300 lm
Luminous intensity: 1,500 mcd
Length: 10 m
Width: 8 mm
Power supply: 24 V DC current /1.5 A (0.2 A/m)

Price per unit (Order No. mo-385680) EUR 119,30 excl. VAT: € 100.25 / $ 118.30

Flexible LED Strip, 12 V DC current , Open Version for Indoor Applications LEDS-5/RGB

Flexible LED Strip, 12 V DC current , Open Version for Indoor Applications

Easy installation due to perfect flexibility and self-adhesive rear side which adheres to almost any kind of surface. Ideally suited for the illumination of rooms and decorative lighting. Due to small dimensions, an application is also possible at locations where standard lamps cannot be used. Feature bare cable ends for the direct connection to a PSU or alternatively to DMX interface CPL-3DMX, CU-6DMX or CU-1RC, CU-4DMX, available at option.

Fitted with SMD LEDs
Beam angle of each LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: red/green/blue
LEDs: 150, SMD 5050
Beam angle: 120°
Length: 5 m
Width: 10 mm
Power supply: 12 V DC current /2 A (0.6 A/m)

Price per unit (Order No. mo-383480) EUR 73,70 excl. VAT: € 61.93 / $ 73.08

Flexible LED Strip, 12 V DC current , Open Version for Indoor Applications LEDS-5/WS

Fitted with SMD LEDs
Beam angle of each LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: white
LEDs: 330, SMD 3528
Beam angle: 120°
Colour temperature: 5,500 K
Wavelength: -
Luminous flux: 396 lm
Luminous intensity: 1,800 mcd
Length: 5 m
Width: 8 mm
Power supply: 12 V DC current /1.5 A (0.5 A/m)

Price per unit (Order No. mo-383460) - not available (_)

Flexible LED Strip, 12 V DC current , Open Version for Indoor Applications LEDS-5/WWS

Fitted with SMD LEDs
Beam angle of each LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: warm white
LEDs: 330, SMD 3528
Beam angle: 120°
Colour temperature: 3,300 K
Wavelength: -
Luminous flux: 330 lm
Luminous intensity: 1,500 mcd
Length: 5 m
Width: 8 mm
Power supply: 12 V DC current /1.5 A (0.5 A/m)

Price per unit (Order No. mo-383470) EUR 52,95 excl. VAT: € 44.50 / $ 52.51

Flexible LED strip, 24 V DC current , humidity-proof version, double-row LEDS-52MP/WS

Flexible LED strip, 24 V DC current , humidity-proof version, double-row

Easy installation due to perfect flexibility and self-adhesive rear side which adheres to almost any kind of smooth surface, suitable for indoor and outdoor applications. Ideally suited for decorative lighting or commercial lighting. Due to small dimensions, an application is also possible at locations where standard lamps cannot be used. Features bare cable ends for the direct connection to a PSU or alternatively to DMX interface CPL-3DMX, CU-6DMX or CU-1RC, CU-4DMX, available at option.

Fitted with 1,200 SMD 3528 LEDs
High luminous efficiency due to double-row LEDs
Beam angle of each LED: 120°
Can be cut into segments of variable size (groups of 12 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: white
LEDs: 1,200; SMD 3528
Beam angle: 120°
Colour temperature: 5,500 K
Wavelength: -
Luminous flux: 1,440 lm
Luminous intensity: 1,800 mcd
Length: 5 m
Width: 12 mm
Height: 4 mm
Power supply: 24 V DC current /3.7 A (0.9 A/m)

Price per unit (Order No. mo-385640) - not available (_)

Flexible LED Strips, 12 V DC current , Humidity-proof Version with 5050 LEDs of extra high luminous intensity (3-chip LED) LEDS-55MP/WS

Flexible LED Strips, 12 V DC current , Humidity-proof Version with 5050 LEDs of extra high luminous intensity (3-chip LED)

Easy installation due to perfect flexibility and self-adhesive rear side which adheres to almost any kind of surface, suitable for indoor and outdoor applications. Ideally suited for decorative lighting. Due to small dimensions, an application is also possible at locations where standard lamps cannot be used. Feature bare cable ends for the direct connection to a PSU or alternatively to DMX interface CPL-3DMX, CU-6DMX or CU-1RV, CU-4DMX, available at option.

Fitted with SMD LEDs
Beam angle of each LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: white
LEDs: 150, SMD 5050
Beam angle: 120°
Colour temperature: 5,500 K
Wavelength: -
Luminous flux: 450 lm
Luminous intensity: 5,400 mcd
Length: 5 m
Width: 10 mm
Power supply: 12 V DC current /2 A (0.6 A/m)

Price per unit (Order No. mo-384660) EUR 83,54 excl. VAT: € 70.20 / $ 82.84

Flexible LED Strips, 12 V DC current , Humidity-proof Version with 5050 LEDs of extra high luminous intensity (3-chip LED) LEDS-55MP/WWS

Fitted with SMD LEDs
Beam angle of each LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: warm white
LEDs: 150, SMD 5050
Beam angle: 120°
Colour temperature: 3,300 K
Wavelength: -
Luminous flux: 420 lm
Luminous intensity: 4,500 mcd
Length: 5 m
Width: 10 mm
Power supply: 12 V DC current /2 A (0.6 A/m)

Price per unit (Order No. mo-384670) EUR 83,54 excl. VAT: € 70.20 / $ 82.84

Flexible LED strip, 12 V DC current , humidity-proof version LEDS-5MP/AM

Flexible LED strip, 12 V DC current , humidity-proof version

Easy installation due to perfect flexibility and self-adhesive rear side which adheres to almost any kind of surface, suitable for indoor and outdoor applications. Ideally suited for decorative lighting. Due to small dimensions, an application is also possible at locations where standard lamps cannot be used. Features bare cable ends for the direct connection to a PSU or alternatively to DMX interface CPL-3DMX, CU-6DMX or CU-1RC, CU-4DMX, available at option.

Fitted with SMD LEDs
Beam angle of ech LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: amber
LEDs: 330, SMD 3528
Beam angle: 120°
Colour temperature: -
Wavelength: 585 nm
Luminous flux: 132 lm
Luminous intensity: 600 mcd
Length: 5 m
Width: 8 mm
Power supply: 12 V DC current /1.5 A (0.5 A/m)

Price per unit (Order No. mo-384420) - not available (_)

Flexible LED strip, 12 V DC current , humidity-proof version LEDS-5MP/BL

Fitted with SMD LEDs
Beam angle of ech LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: blue
LEDs: 330, SMD 3528
Beam angle: 120°
Colour temperature: -
Wavelength: 465 nm
Luminous flux: 66 lm
Luminous intensity: 300 mcd
Length: 5 m
Width: 8 mm
Power supply: 12 V DC current /1.5 A (0.5 A/m)

Price per unit (Order No. mo-383390) EUR 62,30 excl. VAT: € 52.35 / $ 61.78

Flexible LED strip, 12 V DC current , humidity-proof version LEDS-5MP/GN

Flexible LED strip, 12 V DC current , humidity-proof version Easy installation due to perfect flexibility and self-adhesive rear side which adheres to almost any kind of surface, suitable for indoor and outdoor applications. Ideally suited for decorative lighting. Due to small dimensions, an application is also possible at locations where standard lamps cannot be used. Features bare cable ends for the direct connection to a PSU or alternatively to DMX interface CPL-3DMX, CU-6DMX or CU-1RC, CU-4DMX, available at option.

Fitted with SMD LEDs
Beam angle of ech LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: green
LEDs: 330, SMD 3528
Beam angle: 120°
Colour temperature: -
Wavelength: 520 nm
Luminous flux: 264 lm
Luminous intensity: 1,200 mcd
Length: 5 m
Width: 8 mm
Power supply: 12 V DC current /1.5 A (0.5 A/m)

Price per unit (Order No. mo-383400) EUR 62,30 excl. VAT: € 52.35 / $ 61.78

Flexible LED strip, 12 V DC current , humidity-proof version LEDS-5MP/RGB

Fitted with SMD LEDs
Beam angle of ech LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: red/green/blue
LEDs: 150, SMD 5050
Beam angle: 120°
Length: 5 m
Width: 10 mm
Power supply: 12 V DC current /2 A (0.6 A/m)

Price per unit (Order No. mo-383310) EUR 83,54 excl. VAT: € 70.20 / $ 82.84

Flexible LED strip, 12 V DC current , humidity-proof version LEDS-5MP/RT

Fitted with SMD LEDs
Beam angle of ech LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: red
LEDs: 330, SMD 3528
Beam angle: 120°
Colour temperature: -
Wavelength: 623 nm
Luminous flux: 132 lm
Luminous intensity: 600 mcd
Length: 5 m
Width: 8 mm
Power supply: 12 V DC current /1.5 A (0.5 A/m)

Price per unit (Order No. mo-383380) EUR 62,30 excl. VAT: € 52.35 / $ 61.78

Flexible LED strip, 12 V DC current , humidity-proof version LEDS-5MP/WS

Flexible LED strip, 12 V DC current , humidity-proof version Easy installation due to perfect flexibility and self-adhesive rear side which adheres to almost any kind of surface, suitable for indoor and outdoor applications. Ideally suited for decorative lighting. Due to small dimensions, an application is also possible at locations where standard lamps cannot be used. Features bare cable ends for the direct connection to a PSU or alternatively to DMX interface CPL-3DMX, CU-6DMX or CU-1RC, CU-4DMX, available at option.

Fitted with SMD LEDs
Beam angle of ech LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: white
LEDs: 330, SMD 3528
Beam angle: 120°
Colour temperature: 5,500 K
Wavelength: -
Luminous flux: 396 lm
Luminous intensity: 1,800 mcd
Length: 5 m
Width: 8 mm
Power supply: 12 V DC current /1.5 A (0.5 A/m)

Price per unit (Order No. mo-383410) EUR 67,16 excl. VAT: € 56.44 / $ 66.60

Flexible LED strip, 12 V DC current , humidity-proof version LEDS-5MP/WWS

Fitted with SMD LEDs
Beam angle of ech LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: warm white
LEDs: 330, SMD 3528
Beam angle: 120°
Colour temperature: 3,300 K
Wavelength: -
Luminous flux: 330 lm
Luminous intensity: 1,500 mcd
Length: 5 m
Width: 8 mm
Power supply: 12 V DC current /1.5 A (0.5 A/m)

Price per unit (Order No. mo-383420) EUR 67,16 excl. VAT: € 56.44 / $ 66.60

Flexible LED strip, 12 V DC current , humidity-proof version, "ECONOMY QUALITY", LEDS-5MPE/RGB

Accessories, Flexible LED strip, 12 V DC current , humidity-proof version, — Enlarge

Flexible LED strip, 12 V DC current , humidity-proof version, "ECONOMY QUALITY"

The economical version of the LED strip series LEDS-5MP/... with smaller LED chips.

Fitted with SMD LEDs
Beam angle of each LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied with 10 retaining clips
Bare cable ends for the direct connection to a PSU or alternatively to DMX interface CPL-3DMX, CU-6DMX or CU-1RC, CU-4DMX
Supplied on a plastic reel

Specifications:

Colour: red/green/blue
LEDs: 150, SMD 5050
Beam angle: 120°
Colour temperature: -
Wavelength: red: 623 nm green: 520 nm blue: 465 nm
Luminous flux: -
Luminous intensity: -
Length: 5 m
Width: 10 mm
Power supply: 12 V DC current /2.5 A (0.6 A/m)

Price per unit (Order No. mo-386270) EUR 67,16 excl. VAT: € 56.44 / $ 66.60

Flexible LED strip, 12 V DC current , humidity-proof version, "ECONOMY QUALITY", LEDS-5MPE/WS

Flexible LED strip, 12 V DC current , humidity-proof version, "ECONOMY QUALITY"

The economical version of the LED strip series LEDS-5MP/... with smaller LED chips.

Fitted with SMD LEDs
Beam angle of each LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied with 10 retaining clips
Bare cable ends for the direct connection to a PSU or alternatively to DMX interface CPL-3DMX, CU-6DMX or CU-1RC, CU-4DMX
Supplied on a plastic reel

Specifications:

Colour: white
LEDs: 300, SMD 3528
Beam angle: 120°
Colour temperature: 5,500 K
Wavelength: -
Luminous flux: 240 lm
Luminous intensity: 1,300 mcd
Length: 5 m
Width: 8 mm
Power supply: 12 V DC current /1.5 A (0.4 A/m)

Price per unit (Order No. mo-386280) EUR 31,37 excl. VAT: € 26.36 / $ 31.11

Flexible LED strip, 12 V DC current , humidity-proof version, "ECONOMY QUALITY", LEDS-5MPE/WWS

Flexible LED strip, 12 V DC current , humidity-proof version, "ECONOMY QUALITY"

The economical version of the LED strip series LEDS-5MP/... with smaller LED chips.

Fitted with SMD LEDs
Beam angle of each LED: 120°
Can be cut into segments of variable size (groups of 3 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied with 10 retaining clips
Bare cable ends for the direct connection to a PSU or alternatively to DMX interface CPL-3DMX, CU-6DMX or CU-1RC, CU-4DMX
Supplied on a plastic reel

Specifications:

Colour: warm white
LEDs: 300, SMD 3528
Beam angle: 120°
Colour temperature: 3,300 K
Wavelength: -
Luminous flux: 180 lm
Luminous intensity: 1,100 mcd
Length: 5 m
Width: 8 mm
Power supply: 12 V DC current /1.5 A (0.4 A/m)

Price per unit (Order No. mo-386290) EUR 31,37 excl. VAT: € 26.36 / $ 31.11

Flexible LED strip, 24 V DC current , humidity-proof version of high luminous efficiency LEDS-5MPL/RGB

Flexible LED strip, 24 V DC current , humidity-proof version of high luminous efficiency

Easy installation due to perfect flexibility and self-adhesive rear side which adheres to almost any kind of surface, suitable for indoor and outdoor applications. Ideally suited for decorative lighting. Due to small dimensions, an application is also possible at locations where standard lamps cannot be used. Features bare cable ends for the direct connection to a PSU or alternatively to DMX interface CPL-3DMX, CU-6DMX or CU-1RC, CU-4DMX, available at option.

Fitted with SMD LEDs
Beam angle of each angle: 120°
Can be cut into segments of variable size of variable size (groups of 6 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: red/green/blue
LEDs: 300, SMD 5050
Beam angle: 120°
Colour temperature: -
Luminous flux: -
Luminous intensity: -
Length: 5 m
Width: 10 mm
Height: -
Power supply: 24 V DC current /2.5 A (0.6 A/m)
Other features: -

Price per unit (Order No. mo-384700) EUR 152,50 excl. VAT: € 128.15 / $ 151.22

Flexible LED strip, 24 V DC current , humidity-proof version of high luminous efficiency LEDS-5MPL/WS

Fitted with SMD LEDs
Beam angle of each angle: 120°
Can be cut into segments of variable size of variable size (groups of 6 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: white
LEDs: 600, SMD 3528
Beam angle: 120°
Colour temperature: 5,500 K
Wavelength: -
Luminous flux: 720 lm
Luminous intensity: 1,800 mcd
Length: 5 m
Width: 8 mm
Power supply: 24 V DC current /1.5 A (0.4 A/m)

Price per unit (Order No. mo-384680) EUR 119,30 excl. VAT: € 100.25 / $ 118.30

Flexible LED strip, 24 V DC current , humidity-proof version of high luminous efficiency LEDS-5MPL/WWS

Fitted with SMD LEDs
Beam angle of each angle: 120°
Can be cut into segments of variable size of variable size (groups of 6 LEDs)
Humidity-proof PU sleeving for outdoor applications, IP65
Self-adhesive rear side
Supplied on a plastic reel

Specifications:

Colour: warm white
LEDs: 600, SMD 3528
Beam angle: 120°
Colour temperature: 3,300 K
Wavelength: -
Luminous flux: 600 lm
Luminous intensity: 1,500 mcd
Length: 5 m
Width: 8 mm
Power supply: 24 V DC current /1.5 A (0.4 A/m)

Price per unit (Order No. mo-384690) EUR 119,30 excl. VAT: € 100.25 / $ 118.30

Flush-mount light HLE-226/WS

Flush-mount light

Ceiling cutout: Ø 75 mm
Mounting depth: 55 mm/95 mm
Outside diameter: Ø 82 mm
Tiltable: 30°
Diecast light
For cold light reflectors, MR16: Ø 50 mm, GU5.3, max. 50 W

The measurements of the ceiling cutout are approx. values which might deviate slightly. Therefore, the cutouts should not be made prior to receiving the items!

Price per unit (Order No. mo-058064) - not available (_)

Flush-mounted LED spotlights, round and convex, 5 W LDSC-755W/WWS

Flush-mounted LED spotlights, round and convex, 5 W, with the latest chip-on-board (COB) technology.

Beam angle: 24°
White (W) or chromium-plated (C) aluminium housing with front protective glass cover
For installations in ceiling cutouts: Ø 75 mm
For a ceiling thickness from 5 to 15 mm
Quick mounting facility
Supplied with 230 V LED switch-mode PSU
Not dimmable

Specifications:

Energy efficiency class: A+
Luminous flux: 400 lm
Rated life: 50,000 h
Colour temperature: 3,000 K
Switching cycles: 15,000
Response time:<0.5 s
Dimmable: no
Dimensions: Ø 81 mm x 41 mm
Radiation angle/Beam angle: 24°
Equivalent to: -
Base: -
Power capability: 5 W
Voltage: 230 V /50 Hz
Energy consumption/1,000 h: 5.5 kWh/1,000 h
Luminous efficiency: 80 lm/W
Mercury content: 0.0 mg
Luminous intensity: -
Colour consistency: -
Measured value of power consumption: 5 W
Colour rendering index (Ra):>80
Measured life: 50,000 h
Measured luminous flux: 400 lm
Spectral power distribution: -
Luminous flux at the end of service life: -
Power factor: -
Current consumption: 30 mA

Price per unit (Order No. mo-050194) - not available (_)

Flush-mounted LED spotlights, square, 5 W LDSQ-755C/WWS

Flush-mounted LED spotlights, square, 5 W, with the latest chip-on-board (COB) technology.

Beam angle: 24°
White (W) or chromium-plated (C) aluminium housing with front protective glass cover
For installations in ceiling cutouts: Ø 75 mm
For a ceiling thickness from 5 to 15 mm
Quick mounting facility
Supplied with 230 V LED switch-mode PSU
Not dimmable

Specifications:

Energy efficiency class: A+
Luminous flux: 400 lm
Rated life: 50,000 h
Colour temperature: 3,000 K
Switching cycles: 15,000
Response time:<0.5 s
Dimmable: no
Dimensions: 82x82x41 mm
Radiation angle/Beam angle: 24°
Equivalent to: -
Base: -
Power capability: 5 W
Voltage: via suppl. switch-mode PSU
Energy consumption/1,000 h: 5.5 kWhW/1,000 h
Luminous efficiency: 80 lm/W
Mercury content: 0.0 mg
Luminous intensity: -
Colour consistency: -
Measured value of power consumption: 5 W
Colour rendering index (Ra):>80
Measured life: 50,000 h
Measured luminous flux: 400 lm
Spectral power distribution: -
Luminous flux at the end of service life: -
Power factor: -
Current consumption: 30 mA

Price per unit (Order No. mo-050197) EUR 21,85 excl. VAT: € 18.36 / $ 21.67

Flush-mounted LED spotlights, square, 5 W LDSQ-755W/WWS

Flush-mounted LED spotlights, square, 5 W, with the latest chip-on-board (COB) technology.

Beam angle: 24°
White (W) or chromium-plated (C) aluminium housing with front protective glass cover
For installations in ceiling cutouts: Ø 75 mm
For a ceiling thickness from 5 to 15 mm
Quick mounting facility
Supplied with 230 V LED switch-mode PSU
Not dimmable

Specifications:

Energy efficiency class: A+
Luminous flux: 400 lm
Rated life: 50,000 h
Colour temperature: 3,000 K
Switching cycles: 15,000
Response time:<0.5 s
Dimmable: no
Dimensions: 82x82x41 mm
Radiation angle/Beam angle: 24°
Equivalent to: -
Base: -
Power capability: 5 W
Voltage: 230 V /50 Hz
Energy consumption/1,000 h: 5.5 kWh/1,000 h
Luminous efficiency: 80 lm/W
Mercury content: 0.0 mg
Luminous intensity: -
Colour consistency: -
Measured value of power consumption: 5 W
Colour rendering index (Ra):>80
Measured life: 50,000 h
Measured luminous flux: 400 lm
Spectral power distribution: -
Luminous flux at the end of service life: -
Power factor: -
Current consumption: 30 mA

Price per unit (Order No. mo-050198) - not available (_)

Flush-mounted LED spotlights, round and flat, 5 W LDSR-755C/WWS

Flush-mounted LED spotlights, round and flat, 5 W, with the latest chip-on-board (COB) technology.

Beam angle: 24°
White (W) or chromium-plated (C) aluminium housing with front protective glass cover
For installations in ceiling cutouts: Ø 75 mm
For a ceiling thickness from 5 to 15 mm
Quick mounting facility
Supplied with 230 V LED switch-mode PSU
Not dimmable

Specifications:

Energy efficiency class: A+
Luminous flux: 400 lm
Rated life: 50,000 h
Colour temperature: 3,000 K
Switching cycles: 15,000
Response time:<0.5 s
Dimmable: no
Dimensions: Ø 88 mm x 42 mm
Radiation angle/Beam angle: 24°
Equivalent to: -
Base: -
Power capability: 5 W
Voltage: 230 V /50 Hz
Energy consumption/1,000 h: 5.5 kWh/1,000 h
Luminous efficiency: 80 lm/W
Mercury content: 0.0 mg
Luminous intensity: -
Colour consistency: -
Measured value of power consumption: 5 W
Colour rendering index (Ra):>80
Measured life: 50,000 h
Measured luminous flux: 400 lm
Spectral power distribution: -
Luminous flux at the end of service life: -
Power factor: -
Current consumption: 30 mA

Price per unit (Order No. mo-050195) EUR 22,85 excl. VAT: € 19.20 / $ 22.66

Flush-mounted LED spotlights, round and flat, 5 W LDSR-755W/WWS

Flush-mounted LED spotlights, round and flat, 5 W, with the latest chip-on-board (COB) technology.

Beam angle: 24°
White (W) or chromium-plated (C) aluminium housing with front protective glass cover
For installations in ceiling cutouts: Ø 75 mm
For a ceiling thickness from 5 to 15 mm
Quick mounting facility
Supplied with 230 V LED switch-mode PSU
Not dimmable

Specifications:

Energy efficiency class: A+
Luminous flux: 400 lm
Rated life: 50,000 h
Colour temperature: 3,000 K
Switching cycles: 15,000
Response time:<0.5 s
Dimmable: no
Dimensions: Ø 88 mm x 42 mm
Radiation angle/Beam angle: 24°
Equivalent to: -
Base: -
Power capability: 5 W
Voltage: 230 V /50 Hz
Energy consumption/1,000 h: 5.5 kWh/1,000 h
Luminous efficiency: 80 lm/W
Mercury content: 0.0 mg
Luminous intensity: -
Colour consistency: -
Measured value of power consumption: 5 W
Colour rendering index (Ra):>80
Measured life: 50,000 h
Measured luminous flux: 400 lm
Spectral power distribution: -
Luminous flux at the end of service life: -
Power factor: -
Current consumption: 30 mA

Price per unit (Order No. mo-050196) - not available (_)

Cross beam KM-21393

Cross beam, for mounting up to 10 spotlights, matching stands with 35 mm spigot, e.g. KM-246/1.

Black lacquered steel version
Bushing: Ø 35 mm
Length: 145 cm
Weight: 2.92 kg
Supplied with 4 fixing screw sets

Price per unit (Order No. mo-112050) - not available

Telescopic lighting stand KM-246/1

Telescopic lighting stand

Crank handle with push-button for unlocking and locking screw
Adjustable height: 186-304 cm
Aluminium version, mat black lacquered
35 mm spigot with integrated M10 threaded bushing for cross beam (e.g. KM-21393)
Max. load capacity at central weight concentration: 30 kg
Weight: 8.7 kg
Type approved by TÜV (Technical Inspection Authority, Germany)

Price per unit (Order No. mo-113020) EUR 383,30 excl. VAT: € 322.10 / $ 380.08

Universal lighting stand PAST-225/SW

Universal lighting stand

Robust steel tube version
T-crossbar (100 cm) for accepting up to 4 lights
Height can be adjusted in 6 steps (150-320 cm), with locking pin
High stability due to magnesium joint sleeve
Supplied with 4 fixing screw sets

Specifications:

Max. load capacity at centr. weight concentration: 30 kg
Tube diameter: Ø 28 mm
Weight: 6.9 kg
Storage dimensions: 15x15x125 cm

Price per unit (Order No. mo-118890) EUR 87,51 excl. VAT: € 73.54 / $ 86.77

Universal lighting stand system consisting of 2 x 3-point cross beam, 2 x stand and mounting accessories, PAST-320/SW

Universal lighting stand system consisting of 2 x 3-point cross beam, 2 x stand and mounting accessories

Steel tube version
For a width of 3 m, both cross beams (150 cm each) can be screwed together
Adjustable height: 145-305 cm
Matching nylon bags BAG-320HS for 2 stands and BAG-320TV for 2 cross beams are available at option

Specifications:

Max. load capacity at centr. weight concentration: 80 kg
Tube diameter: Ø 28 mm
Weight: 22 kg
Storage dimensions: -

Price per unit (Order No. mo-111840) EUR 274,50 excl. VAT: € 230.67 / $ 272.19

Horizontal T-bar PAST-410/SW

Horizontal T-bar, for mounting up to 4 lights, matching stands with 35 mm spigot.

Black lacquered lightweight aluminium version
Bushing: Ø 35 mm
Length: 126 cm, weight: 750 g
Supplied with 4 fixing screw sets

Price per unit (Order No. mo-129260) EUR 30,27 excl. VAT: € 25.44 / $ 30.02

Ceramic socket, GU10, HLE-10GU

Ceramic socket, GU10

For high-voltage lamps (230 V)
Twist lock
Power rating: 100 W max.
15 cm connection cable

Price per unit (Order No. mo-020460) EUR 1,28 excl. VAT: € 1.08 / $ 1.27

Halogen lamp, 230-240 V/500 W HLG-230/500

Halogen lamp, 230-240 V/500 W

Base: GY9.5
Ø 28.5 mm x 75 mm
Average life: 75 h
13,000 lm

Price per unit (Order No. mo-058012) EUR 20,83 excl. VAT: € 17.50 / $ 20.65

Halogen Lamps, Reflector, MR16, HLG-24/250MR

Halogen Lamps, Reflector, MR16 For light effect units.

Halogen lamp,

Specifications:

Power: 24 V/250 W
Base: GX5.3
Type, dimensions: MR16, ELC
Beam angle: -
Average life: 50 h
Luminous flux: -
Luminous intensity: -
Luminous efficiency:
Colour temperature: 3,400 K
Other features: GE LIGHTING

Price per unit (Order No. mo-058011) EUR 15,02 excl. VAT: € 12.62 / $ 14.89

logen lamp, PAR56 HLG-240/300MF

Halogen lamp, PAR56, for PAR reflectors.

Medium flood
230 V/300 W
Base: GX16d
Average life: 2,000 h
30,000 cd

Price per unit (Order No. mo-058002) - not available (_)

logen lamp, PAR56 HLG-240/300NS

Halogen lamp, PAR56, for PAR reflectors.

Narrow spot
230 V/300 W
Base: GX16d
Average life: 2,000 h
40,000 cd

Price per unit (Order No. mo-058003) EUR 25,53 excl. VAT: € 21.45 / $ 25.32

Halogen Lamps, Reflector, MR16, HLT-12/100MRL

Halogen Lamps, Reflector, MR16. For light effect units.

Power: 12V/100W; base: GZ6.35; average life: 300h.

Specifications:

Power: 12 V/100 W
Base: GZ6.35
Type, dimensions: MR16
Beam angle: -
Average life: 300 h
Luminous flux: 2,800 lm
Luminous intensity: -
Luminous efficiency: 28 lm/W
Colour temperature: 3,100 K
Other features: -

Price per unit (Order No. mo-050127) EUR 12,04 excl. VAT: € 10.12 / $ 11.94

alogen lamp, 120 V/300 W HLT-120/300

Halogen lamp, 120 V/300 W

Base: GY6.35
6,300 lm, 2,940 K
Average life: 400 h

Price per unit (Order No. mo-051306) EUR 10,49 excl. VAT: € 8.82 / $ 10.40

Halogen Lamps, Reflector, MR16, HLT-15/150MRL

Halogen Lamps, Reflector, MR16

For light effect units.

Power: 15V/150W; base: GZ6.35; average life: 300h.

Specifications:

Power: 15 V/150 W
Base: GZ6.35
Type, dimensions: MR16
Beam angle: -
Average life: 300 h
Luminous flux: 4,500 lm
Luminous intensity: -
Luminous efficiency: 30 lm/W
Colour temperature: 3,300 K
Other features: -

Price per unit (Order No. mo-050128) EUR 8,65 excl. VAT: € 7.27 / $ 8.58

Halogen lamp, 230 V/300 W HLT-230/300

Halogen lamp, 230 V/300 W

Base: GX6.35
Ø 16 mm x 60 mm
Average life: 300 h
5,340 lm, 2,900K

Price per unit (Order No. mo-051304) EUR 10,49 excl. VAT: € 8.82 / $ 10.40

Halogen lamp, 24 V/250 W HLT-24/250

Halogen lamp, 24 V/250 W

Base: GY6.35
Type/dimensions: Ø 13.5 mm x 53 mm
Average life: 300 h
8,000 lm, 2,800 K

Price per unit (Order No. mo-059999) EUR 4,75 excl. VAT: € 3.99 / $ 4.71

Halogen Lamps, Reflector, MR16 HLT-24/250MRL

Halogen Lamps, Reflector, MR16

For light effect units.

Power: 24V/250W; base: GX5.3; average life: 300h.

Specifications:

Power: 24 V/250 W
Base: GX5.3
Type, dimensions: MR16
Beam angle: -
Average life: 300 h
Luminous flux: 7,500 lm
Luminous intensity: -
Luminous efficiency: 30 lm/W
Colour temperature: 3,100 K
Other features: -

Price per unit (Order No. mo-050129) EUR 10,47 excl. VAT: € 8.80 / $ 10.38

logen lamp, PAR36 HLT-6/30

Halogen lamp, PAR36, for PAR reflectors.

6.4 V/30W
Base: 2 x screw
Average life: 100 h
55,000 cd
Beam angle: 5°

Specifications:

Power: 6.4 V/30 W
Base: 2 x screw
Type, dimensions: PAR36
Beam angle: 5°
Average life: 100 h
Luminous flux: -
Luminous intensity: 55,000 cd
Luminous efficiency:
Colour temperature: -
Other features:

Price per unit (Order No. mo-058001) - not available (_)

Set of Colour Filters LEF-256SET

Set of Colour Filters

Manufacturers: LEE Filters
Suitable as front filter for reflectors

Specifications:

Suitable for: -
Colours: orange, magenta, peacock blue (cyan), mauve (violet)
Dimensions: 200x200 mm

Price per unit (Order No. mo-382030) - not available (_)

Set of Colour Filters LEF-264SET

Set of Colour Filters

Manufacturers: LEE Filters
Suitable as front filter for reflectors

Specifications:

Suitable for: -
Colours: orange, magenta, peacock blue (cyan), mauve (violet)
Dimensions: 240x240 mm

Price per unit (Order No. mo-382040) - not available

Set of Colour Filters LEF-56SET

Set of Colour Filters

Manufacturers: LEE Filters
Suitable as front filter for reflectors

Specifications:

Suitable for: -
Colours: blue, red, yellow, green
Dimensions: 200x200 mm

Price per unit (Order No. mo-381100) EUR 7,04 excl. VAT: € 5.92 / $ 6.98

Set of Colour Filters LEF-64SET

Set of Colour Filters

Manufacturers: LEE Filters
Suitable as front filter for reflectors

Specifications:

Suitable for: -
Colours: blue, red, yellow, green
Dimensions: 240x240 mm

Price per unit (Order No. mo-381110) - not available (_)

Flexible LED Strips, 24 V DC current , Double-row, LEDS-52/WS

Flexible LED Strips, 24 V DC current , Double-row

Easy installation due to perfect flexibility and self-adhesive rear side which adheres to almost any kind of smooth surface, suitable for indoor applications. Ideally suited for decorative lighting or commercial lighting. Due to small dimensions, an application is also possible at locations where standard lamps cannot be used. Feature bare cable ends for the direct connection to a PSU or alternatively to DMX interface CPL-3DMX, CU-6DMX or CU-1RC, CU-4DMX, available at option.

Fitted with 1,200 SMD 3528 LEDs
High luminous efficiency due to double-row LEDs
Beam angle of each LED: 120°
Can be cut into segments of variable size (groups of 12 LEDs)
Self-adhesive rear side
Supplied with 10 retaining clips
Supplied on a plastic reel

Specifications:

Colour: white
LEDs: 1,200; SMD 3528
Beam angle: 120°
Colour temperature: 5,500 K
Wavelength: -
Luminous flux: 1,440 lm
Luminous intensity: 1,800 mcd
Length: 5 m
Width: 12 mm
Height: 4 mm
Power supply: 24 V DC current /3.7 A (0.9 A/m)

Price per unit (Order No. mo-386860) - not available (_)

Nylon bag for stands BAG-30HS

Nylon bag for stands, for transporting and storing lighting stands, e.g. PAST-220/SW. Dimensions: 155x20x25 cm.

Price per unit (Order No. mo-251540) EUR 26,05 excl. VAT: € 21.89 / $ 25.83

Nylon bag for stands of PAST-320/SW, BAG-320HS

Nylon bag for stands of PAST-320/SW, for transporting and storing 2 stands.

Pull cord for closing, with stopper
Carrying strap, adjustable length
Dimensions: 126x32 cm

Price per unit (Order No. mo-253290) EUR 24,92 excl. VAT: € 20.94 / $ 24.71

Nylon bag for cross beams of PAST-320/SW, BAG-320TV

Nylon bag for cross beams of PAST-320/SW, for transporting and storing 2 cross beams.

Pull cord for closing, with stopper
Carrying strap, adjustable length
Dimensions: 150x45 cm

Price per unit (Order No. mo-253300) EUR 29,45 excl. VAT: € 24.75 / $ 29.20

Coloured foil LCF-019/RT

Coloured foil, small rolls (0.6 m2).

For the individual cut of matching front filters for reflectors
Length of roll: 122 cm, width of roll: 50 cm

Specifications:

Colour no.: 019 red (RT)

Price per unit (Order No. mo-382490) - not available (_)

Coloured foil LCF-101/GE

Coloured foil, small rolls (0.6 m2).

For the individual cut of matching front filters for reflectors
Length of roll: 122 cm, width of roll: 50 cm

Specifications:

Colour no.: 101 yellow (GE)

Price per unit (Order No. mo-382500) EUR 16,13 excl. VAT: € 13.55 / $ 15.99

Coloured foil LCF-105/OR

Coloured foil, small rolls (0.6 m2).

For the individual cut of matching front filters for reflectors
Length of roll: 122 cm, width of roll: 50 cm

Specifications:

Colour no.: 105 orange (OR)

Price per unit (Order No. mo-382510) - not available (_)

Coloured foil LCF-113/MG

Coloured foil, small rolls (0.6 m2).

For the individual cut of matching front filters for reflectors
Length of roll: 122 cm, width of roll: 50 cm

Specifications:

Colour no.: 113 magenta (MG)

Price per unit (Order No. mo-382520) - not available (_)

Coloured foil LCF-115/PBL

Coloured foil, small rolls (0.6 m2).

For the individual cut of matching front filters for reflectors
Length of roll: 122 cm, width of roll: 50 cm

Specifications:

Colour no.: 115 peacock blue/cyan (PBL)

Price per unit (Order No. mo-382530) EUR 16,13 excl. VAT: € 13.55 / $ 15.99

Coloured foil LCF-119/BL

Coloured foil, small rolls (0.6 m2).

For the individual cut of matching front filters for reflectors
Length of roll: 122 cm, width of roll: 50 cm

Specifications:

Colour no.: 119 blue (BL)

Price per unit (Order No. mo-382540) - not available (_)

Coloured foil LCF-124/GN

Coloured foil, small rolls (0.6 m2).

For the individual cut of matching front filters for reflectors
Length of roll: 122 cm, width of roll: 50 cm

Specifications:

Colour no.: 124 green (GN)

Price per unit (Order No. mo-382550) - not available (_)

Coloured foil LCF-126/VT

Coloured foil, small rolls (0.6 m2).

For the individual cut of matching front filters for reflectors
Length of roll: 122 cm, width of roll: 50 cm

Specifications:

Colour no.: 126 mauve/violet (VT)

Price per unit (Order No. mo-382560) - not available (_)

Quick connector for SMD LED strips, LEDC-1L

Quick connector for SMD LED strips

Allows the direct connection of flexible LED strips: for this purpose, the end of the LED strip is inserted into the slot of the connector
Suitable width: 10 mm
Type of connection: strip/strip, 2 poles
Current rating: 5 A

Price per unit (Order No. mo-385860) EUR 1,38 excl. VAT: € 1.16 / $ 1.37

Quick connector for SMD RGB LED strips, LEDC-1RGB

Quick connector for SMD RGB LED strips

Allows the direct connection of flexible RGB LED strips: for this purpose, the end of the LED strip is inserted into the slot of the connector
Suitable width: 10 mm
Type of connection: strip/strip, 4 poles
Current rating: 5 A

Price per unit (Order No. mo-385870) EUR 1,38 excl. VAT: € 1.16 / $ 1.37

Quick connector for SMD LED strips, LEDC-1S

Quick connector for SMD LED strips

Allows the direct connection of flexible LED strips: for this purpose, the end of the LED strip is inserted into the slot of the connector
Suitable width: 8 mm
Type of connection: strip/strip, 2 poles
Current rating: 5 A

Price per unit (Order No. mo-385850) EUR 1,29 excl. VAT: € 1.08 / $ 1.28

Quick connector for SMD LED strips, LEDC-2L

Quick connector for SMD LED strips

Allows the direct connection of flexible LED strips: for this purpose, the end of the LED strip is inserted into the slot of the connector
Suitable width: 10 mm
Type of connection: strip/bare cable ends, 2 poles
Current rating: 5 A

Price per unit (Order No. mo-385890) EUR 1,29 excl. VAT: € 1.08 / $ 1.28

Quick connector for SMD RGB LED strips, LEDC-2RGB

Quick connector for SMD RGB LED strips

Allows the direct connection of flexible RGB LED strips: for this purpose, the end of the LED strip is inserted into the slot of the connector
Suitable width: 10 mm
Type of connection: strip/bare cable ends, 4 poles
Current rating: 5 A

Price per unit (Order No. mo-385900) EUR 1,46 excl. VAT: € 1.23 / $ 1.45

Quick connector for SMD LED strips, LEDC-2S

Quick connector for SMD LED strips

Allows the direct connection of flexible LED strips: for this purpose, the end of the LED strip is inserted into the slot of the connector
Suitable width: 8 mm
Type of connection: strip/bare cable ends, 2 poles
Current rating: 5 A

Price per unit (Order No. mo-385880) EUR 1,29 excl. VAT: € 1.08 / $ 1.28

Quick connector for SMD LED strips, LEDC-3L

Quick connector for SMD LED strips

Allows the direct connection of flexible LED strips: for this purpose, the end of the LED strip is inserted into the slot of the connector
Suitable width: 10 mm
Cable length: 10 cm, 2 poles
Type of connection: strip/strip
Current rating: 5 A

Price per unit (Order No. mo-385920) EUR 2,00 excl. VAT: € 1.68 / $ 1.98

Quick connector for SMD RGB LED strips, LEDC-3RGB

Quick connector for SMD RGB LED strips

Allows the direct connection of flexible RGB LED strips: for this purpose, the end of the LED strip is inserted into the slot of the connector
Suitable width: 10 mm
Cable length: 10 cm, 4 poles
Type of connection: strip/strip
Current rating: 5 A

Price per unit (Order No. mo-385930) EUR 2,13 excl. VAT: € 1.79 / $ 2.11

Quick connector for SMD LED strips, LEDC-3S

Quick connector for SMD LED strips

Allows the direct connection of flexible LED strips: for this purpose, the end of the LED strip is inserted into the slot of the connector
Suitable width: 8 mm
Cable length: 10 cm, 2 poles
Type of connection: strip/strip
Current rating: 5 A

Price per unit (Order No. mo-385910) EUR 1,92 excl. VAT: € 1.61 / $ 1.90

Quick connector for SMD LED strips, LEDC-4L

Quick connector for SMD LED strips

Allows the direct connection of flexible LED strips to a PSU: for this purpose, the end of the LED strip is inserted into the slot of the connector
Suitable width: 10 mm
Cable length: 10 cm, 2 poles
Type of connection: strip/low-voltage inline jack, Ø 5.5 mm/2.1 mm
Current rating: 5 A

Price per unit (Order No. mo-385950) EUR 2,00 excl. VAT: € 1.68 / $ 1.98

Quick connector for SMD LED strips, LEDC-4S

Quick connector for SMD LED strips

Allows the direct connection of flexible LED strips to a PSU: for this purpose, the end of the LED strip is inserted into the slot of the connector
Suitable width: 8 mm
Cable length: 10 cm, 2 poles
Type of connection: strip/low-voltage inline jack, Ø 5.5 mm/2.1 mm
Current rating: 5 A

Price per unit (Order No. mo-385940) EUR 2,00 excl. VAT: € 1.68 / $ 1.98

Silicone support LEDS-10H

Silicone support, for flexible LED strips with a width of 8 mm, e.g. from the series LEDS-5...

For mounting by adhesive bonding, stapling or nailing
Transparent silicone material
Dimensions: 10 mm x 4 mm x 5 m (WxHxL)
Supplied on a plastic reel

Price per unit (Order No. mo-385070) - not available (_)

Set of colour filters LEF-36SET

Set of colour filters

Suitable as front filter for the spotlight PAR-36/SW
Colours: blue, red, yellow, green
Ø 110 mm

Price per unit (Order No. mo-381090) - not available (_)

Mains extension cable, IP67, ODP-34AC

Mains extension cable, IP67, suitable for LED spotlights ODP-361RGB, ODP-483RGBW and LED DMX light effect panel RGBL-222DMX.

Fitted with screwable 3-pole plug and 3-pole inline jack
Cable specification: H05VV-F3G x 2.5 mm2
Length: 2 m

Price per unit (Order No. mo-050183) EUR 32,38 excl. VAT: € 27.21 / $ 32.11

Lasershow designer Pangolin QuickShow 2.5 FB3/QS, PANGOLIN-SET

Lasershow designer Pangolin QuickShow 2.5 FB3/QS

High-performance PC software for laser shows, allows live control, to create graphics and to program a show
Impressive laser shows with QuickShow 2.5 for discotheques, bars, clubs, events and concerts
Professional results within minutes thanks to an intuitive user surface
Up to 9 ILDA show lasers can be operated with each interface (fed-through)
One interface will be required for each different setup or version of a show laser
Multilingual version with USB Flashback 3 ILDA interface
Includes more than 2,000 beam effects, texts, animations, graphics and more
Different plug-in tools, e.g. QuickText, QuickShape, QuickTrace, QuickTargets, QuickTimeline and QuickDMX
Different display modes possible: single cue, multiple cues, cue sequences and timeline-based programming
High-quality images thanks to integrated beyond calculation engine
Creating and editing cues on the screen before showing them to the audience
Import and direct output of GIF, JPG and BMP files
Sound-to-laser function for music-controlled laser output
Virtual laser jockey
Timeline with unlimited tracks
Supports DMX512 input and output
Control possible via mouse, keyboard, touchscreen, MIDI controller and DMX control panel
No dongles: licence is directly linked with the output interface
Latest version of the program thanks to free software updates
Recommended hardware: laptop or desktop PC with dual processor, 2 GB RAM and Windows* XP/Vista/7/8 (32-bit or 64-bit)
Recommended for show laser: analogue modulation, 30 kpps scan speed with ILDA 8 degrees

Price per unit (Order No. mo-370020) EUR 599,00 excl. VAT: € 503.36 / $ 593.97

Barn doors PARC-56B

Barn doors

Matching the LED spotlights PARC-56/RGB and PARC-56/WS
4 adjustable flaps for limiting the light cone
Black lacquered metal version
Weight: 760 g

Price per unit (Order No. mo-386670) EUR 36,08 excl. VAT: € 30.32 / $ 35.78

Barn doors PARC-64B

Barn doors

Matching the LED spotlights PARC-64/RGB, PARC-64/WS and PARC-64/CTW
4 adjustable flaps for limiting the light cone
Black lacquered metal version
Weight: 880 g

Price per unit (Order No. mo-386780) EUR 34,11 excl. VAT: € 28.66 / $ 33.82

Floor stand PARL-1FS

Floor stand, for spotlights and light effect units.

M10 screw with wing nut for installation of units
Load capacity: 10 kg
Space-saving transport due to turnable arms
Rubber feet
Max. floor space: 24x22 cm
Mounting height: approx. 4 cm
Own weight: 310 g

Price per unit (Order No. mo-111880) EUR 9,08 excl. VAT: € 7.63 / $ 9.00

C-hook PAST-1

C-hook, with mounting screw M8x30 mm.

For mounting light effect units and spotlights to light supporting systems
Angled aluminium version with locking screw
For tube diameter: 25-50 mm, mounting hole of hook: 38 mm
Max. load capacity: 20 kg

ATTENTION: Safety ropes must be used!

Price per unit (Order No. mo-128560) - not available

Real-time visualisation software REALIZZER-3D

Real-time visualisation software, (basic version), for DMX-controlled light shows.

REALIZZER-3D allows you to create an almost photo-realistic simulation of a complete real-time light show on your PC. The software is supplied with a device library and various 3D models (e.g. traverses, decoration, stages). This planning tool can easily be combined with any PC-based and DMX-capable lighting control. The program supports interfaces such as ArtNET.

Real-time lighting simulation
Simulation of almost any lighting effect (gobo wheels/colour wheels, prism, iris, shutter, etc.)
Comprehensive library: e.g. spotlights, traverses, decoration
ArtNET input (1 universe)
3D mouse support (3Dconnexion)
Minimum system requirements: IBM-compatible PC (dual-core 2 GHz or higher), 1 GB RAM, DirectX 9 compatible graphics card with 512 MB RAM min. (recommended: nVidea GTX465 or higher), CD-ROM, free USB port for dongle, Windows* XP/Vista/7/8.
Recommended system for a high-resolution display: Intel i7 CPU with approx. 2 GHz, 8 GB RAM, graphics card for gaming (nVidia GTX680 or higher) with 3 GB RAM, CD-ROM, free USB port for dongle, Windows* 7/8.
Scope of delivery: Program CD, instruction manual to be downloaded from manufacturer's website
Upgrade versions Professional and Ultimate are available upon request.

EVENT Rookie 05/2014

"Convincing REALIZZER! Instead of distracting you with fancy features, it impresses with the essential ones. With a clearly-arranged and intuitive user surface, high-quality graphics can quickly and easily be achieved."

Price per unit (Order No. mo-118057) - not available

Mounting hook TA-10

Mounting hook, with mounting screw M8 x 30 mm and wing nut.

For mounting light effect units and spotlights to light supporting systems
Black lacquered metal version with locking screw
For tube diameter: 35-50 mm, mounting hole of hook: 42 mm
Max. load capacity: 15 kg

ATTENTION: Safety ropes must be used!

Price per unit (Order No. mo-127910) EUR 6,47 excl. VAT: € 5.44 / $ 6.42

Mounting clamp TA-100

Mounting clamp, with mounting screw M12 x 30 mm.

For mounting light effect units and spotlights to light supporting systems
Robust diecast aluminium version with movable joints
For tube diameter: 50 mm
Max. load capacity: 100 kg

ATTENTION: Safety ropes must be used!

Price per unit (Order No. mo-126760) EUR 35,78 excl. VAT: € 30.07 / $ 35.48

Mounting clamp TA-110

Mounting clamp, with mounting screw M6 x 40 mm.

For mounting light effect units and spotlights to light supporting systems, e.g. PAST-320/SW
Robust diecast aluminium version with movable joints
For tube diameter: 32 mm
Max. load capacity: 50 kg

ATTENTION: Safety ropes must be used!

Price per unit (Order No. mo-111950) EUR 9,57 excl. VAT: € 8.04 / $ 9.49